setting load的例句大全

Georgia Random Notes& Gun Research and Application of Automatic Grouting Pistol with Setting Load Controllable

初撑力可控自动注液枪的研究与应用

Field Calculation of Casing Head Setting Load

套管悬挂载荷的现场计算

The double telescopic constant setting load leg of the hydraulic support

液压支架上恒初撑力式双伸缩立柱

The Setting Method of Load Limiting Resistor for Heavy Power Flow Lines in North China Power Systems

华北电网重潮流线路负荷限制电阻整定方法

However, there are still many problems to be solved because of the complicated structure of passenger compartment, such as setting proper boundary conditions for solar radiation, establishing human thermoregulation model, calculating the heat load of inner cabin.

但是由于汽车乘员舱内结构十分复杂，如何准确模拟日照热辐射模型、计算车室内热负荷、引用人体热调节模型等难题有待更好地解决。

The VSC-HVDC active power setting has been obtained through power allocation strategy based on QV curves, and simulation result has verified the effectivity of the power allocation strategy to increase the reactive power margin of load bus and to improve system voltages.

通过基于QV曲线的功率分配策略设定了VSC传输的有功功率，使VSC-HVDC在该有功传输值下负荷母线的无功裕度和系统电压水平都得到提升了，验证了该策略的有效性。

Setting a elastic element on the back of the connecting rod bearing shell on a punch press can greatly reduce dynamic load acted on the punch press and avoid the transfer of vibration to the punch press.

在冲床连杆瓦背部设置弹性元件，可以显著地降低作用于床身的动载荷，阻止振动向床身传递。

In this paper, the interaction between both loops of the load control system in Boiler Follow Mode is studied, and a controller parameter setting method based on the concept of the equivalent plant and the closed multivariable system characteristic equation is proposed.

本文分析了锅炉跟随方式的锅炉-汽机单元机组负荷控制系统两回路的相互影响。同时提出了以等效被调对象的概念和闭环多变量系统的特征方程式为依据的调节器参数的整定法。

The monitoring system of gate can display the gate opening, the system load, direct load and other important real-time parameter, the dynamic simulation display of gate, sound and light alarm function, gate up and down and stop control function, system parameter setting function.

上位闸门监控系统能够实时显示闸门开度、系统荷载、直接荷载等重要实时参数；闸门提升动态模拟显示功能；声光报警功能；闸门升、降、停实时上位控制功能；系统参数上位设置功能。

The on site test results of micro processor based AVR installed at Jiaxing Power Plant are presented in this paper. The contents of the test include the parameter measuring of AVR, no load step response, setting of parameters and damping effect of PSS.

提供了嘉兴发电厂300MW发电机WKKL型微机励磁调节器的试验结果，包括微机励磁调节器的参数测量、空载阶跃响应、电力系统稳定器（PSS）参数整定和阻尼效果试验等。

According to the test result of frequency response characteristic of the excitation system without PSS the parameters of the PSS are set and both step response test of the load and mis-reverse adjustment test for the excitation system after the setting are carried out.

根据无PSS时的励磁系统频率响应特性试验结果对PSS的参数进行了整定，并对整定后的系统进行了负载阶跃和反调试验。

The system software from the EMS dispatching automation system and centralized UFLS device acquires the real-time observation data, low frequency on-line calculation and scheme of setting calculation ( Tangential load ratio or capacity).

该系统软件通过从EMS调度自动化系统和集中式低频减载装置实时获取观测数据，实现低频在线计算与方案整定计算（切负荷比例或容量）。

setting and application of the time-varying media's boundary condition and local absorbing load

时变媒质边界条件与局部吸收负载的设置与应用

use this setting to load symbols for only those modules designated in an include list.

使用此设置可以只加载包括列表中指定的模块的符号。

the mechanism of that the under-voltage load shedding ( uvls) can improve the transient voltage security is analyzed. the method and steps of setting parameter for uvls considering transient voltage security are put forward.

分析了低压减载（UVLS）改善暂态电压安全性的机理，提出UVLS参数优化整定中考虑暂态电压安全的分析方法与步骤，基于暂态电压安全裕度分析评估了电网暂态电压安全的薄弱区域。

through setting the parameter and the load, according to checking computations under interrelated standard, the buckles were adopted to be the set of support plate.

经过设置脚手架搭设参数和荷载参数，按照相关规范验算后确定采用扣件式脚手架作为模板支撑系统。

It has been applied to building electricity plan design, secondary drawings design, marking, devices statistics, linestyle setting and power system load calculation etc.

可应用于建筑电气的平面图设计、系统图设计、二次接线图设计、标注、设备统计、线型设置、负荷表计算等方面。

an initial run setting is added to your load test when you create your load test using the new load test wizard.

当您使用[新增负载测试精灵]来建立负载测试时，就会将初始回合设定加入至负载测试。

the initial run setting is created using the new load test wizard which is covered in step 4 in the next section.

初始回合设定是使用[新增负载测试精灵]所建立，这项作业包含在下一节的步骤4中。

the initial run setting is created when you create a load test by using the new load test wizard.

当您使用[新增负载测试精灵]建立负载测试时，会建立初始的回合设定。