shear plane的例句大全

This thesis carries out the pseudo static test, which are subjected to vertical loads and horizontal cyclic loads, respectively on two specimens, including the framed short-leg shear wall inclined column-shaped transfer plane framework and the same dimension beam-shaped transfer structure frame.

本文分别对一榀框支短肢剪力墙斜柱式转换框架及一榀相同尺寸的梁式转换框架两个试件进行了竖向荷载和水平低周反复荷载共同作用下的拟静力试验。

The principal shear fracture plane of rock under compression shear state is to propagate along the upper boundary of the fracture zone.

岩石压剪主剪断面沿该破裂区上部边界扩展。

Theoretical analysis of crack-tip stress fields in FGMs under anti-plane shear impact loading

功能梯度材料受冲击载荷作用裂纹尖端应力场

the transmitting probe produces a pulse which causes a p-wave in the normal direction of the plane and a s-wave in its shear direction.

发射探头对岩块法向脉冲后产生纵波，同时在其垂直方向产生横波沿该平面的方向传播。

differential cubature method for in-plane vibration analysis of shear deformable curved beams

圆弧曲梁面内自由振动的微分容积解法

numerical analysis of acoustic radiation vortical modes in a spatially evolving supersonic plane shear layer

超声速平面剪切层声辐射涡模态数值分析

among all parameters, pin insertion angle, pin diameter and pin density are primary for compression and shear properties, while the oblique angle and pin layout could be neglected except that pins on transverse plane about shearing load have little contribution to the shear behavior.

Pin植入角、直径以及植入密度是压缩和剪切性能的主要影响因素，而端部斜切角及空间布局的影响可忽略。此外，横向面内pin对剪切性能的贡献较小。

The cleavage and schistosity acted as an axial plane role in the early generation of compressed shear fold, and changed into a slip plane in the later generation of flexural slip fold.

片理（劈理）为早世代挤压-剪切褶皱的轴面片理，又成为晚世代弯滑褶皱的滑动面；

Shear stress arises from forces that are parallel to the plane of the cross section.

切应力由平行于截面的力引起.

Series solutions were derived for the in-plane strain, deflection and bending strain that satisfy the simplified boundary conditions to calculate the shear lag coefficient.

根据简化的边界条件，得到了面内应变和弯曲应变的级数解，进而求得剪力滞后系数。

It is justified that the maximum cyclic shear effect plane of the specimens in triaxial liquefaction test and-simple shea'r liquefaction test and of soil elements under general plane strain condition can only be determined by static stress components and is undependent on cyclic stress.

对于三轴液化试验、简切液化试验的受力条件和平面应变状态下土单元的受力条件，证明了最大往返剪切作用面的位置只由静力有效应力分量来确定而与往返应力无关。

The finite deformation theory and the Nakai's sub-loading constitutive model are used to investigate shear band localization in plane strain model tests.

基于有限变形理论和中井的下负荷面本构关系模型，研究了平面应变试验中黏土试样变形的局部化问题。

It is obvious by strain measure, petrofabric analysis, shear displacement amount counting and isotopic dating that ① the ductile shear zone's deformation belongs to plane simple-shear strain, and later the deformation translates into extensional strain.

应变测量、岩组分析、剪切位移量计算、同位素测年等定量分析表明：①以平面单剪应变为主，稍晚向伸长应变转化；

On shear deforming lines in plane stress and strain problem

平面塑性变形的剪切变形线

The analysis covers plane strain, plane stress and anti-plane strain shear cases.

分析包括了平面应变 、 面应力和出平面应变剪切三种情况.

The influence of shear flow along the magnetic field accompanied with a plane current layer on the tearing instability is analyzed.

在电流片两侧的基态速度场与磁场相互平行的位形下，讨论了速度切变对撕裂模不稳定性的影响。

that shear stress , resolved within a slip plane and direction, which is required to initiate slip.

使得晶体开始滑移所需要的纯剪切应力, 在某一特定滑移面和滑移方向上的分量.

Analysis of strength and shear-tensile failure of rock specimens with sedimentary weak plane

具有沉积弱面试样的剪切拉伸破坏及强度分析

Method of Estimating In-plane Shear S-N Curve of Unidirectional Laminate from Off-axis Tension S-N Curve

由单向层压板偏轴拉伸S-N曲线估算面内剪切S-N曲线的方法

Application of Inclined Plane Shear Test to Asphalt Mixture

斜面剪切试验在沥青混合料中的应用