shear wall的例句大全

Analysis of interruptable height of shear wall in frame-shear wall structure

框-剪结构剪力墙可中断高度的分析研究

The conditions of interruptable shear wall height are proposed.

设定可中断剪力墙高度的条件。

The height of the structure has small influences to the interruptable shear wall height.

结构高度对中断剪力墙高度的影响较小。

The conditions that the most story drift angle of interruptable shear wall height are established.

设定了最大层间位移角θmax为可中断剪力墙的条件。

The results show that, with the ( increase) of the rigidity characteristic, the interruptable shear wall height increases.

计算表明：随着刚度特征值的增加，可中断剪力墙的高度随之增加。

The storey element, which can model one storey of the frame-shear wall structure is fabricated. Based on SRSS method, the frame-shear wall structure with shear wall interruption at different heights is analyzed. The conditions of interruptable shear wall height are established.

构造能模拟一层框剪结构的层单元，用振型分解反应谱法分析不同高度和结构刚度特征值的断层剪力墙框剪结构的地震反应，设定可中断剪力墙高度的条件。

With regard to the thermal insulation of the reinforced concrete external wall of the shear wall structure, the light concrete self-hung board is adopted as the external thermal insulation of the reinforced concrete external wall and works as the inner lining of the concrete wall exterior template.

针对于剪力墙结构钢筋混凝土外墙的保温，采用轻质混凝土型外保温自挂板作钢筋混凝土外墙的外保温，使轻质混凝土保温自挂板做为混凝土墙体外模板的内衬。

The traditional construction process of shear wall generally were included: binding steel bar, supporting shear wall formwork, pouring concrete, demolition of the template and maintenance, paste/ spraying thermal insulation layer of exterior wall, daub coating, coating/ brick on the surface.

传统的剪力墙施工工序一般为绑扎钢筋骨架、支护剪力墙模板、浇筑混凝土、拆模养护、粘贴／喷涂外墙保温层、涂抹保护层、涂料／面砖饰面层。

Study on Composite Shear Wall Structure System with Thermal Insulation Wall Form of Glazed Hollow Beads ANALYSES OF MECHANICAL BEHAVIORS OF COMBINATIONAL MULTI-RIBBED COMPOSITE WALL

玻化微珠保温墙模复合剪力墙体系研究组合式密肋复合墙体的受力性能研究

The application of shear wall structure steel large formwork construction technology

剪力墙结构钢制大模板施工技术应用

A nonlinear FEM analysis model is set up based on the finite element analysis software& ANSYS. The staggered shear wall structure and the coupled shear wall structure are analyzed with this model.

通过建立非线性有限元分析模型，运用通用有限元分析软件ANSYS对新型隔层错跨钢筋混凝土剪力墙结构和传统双肢剪力墙结构进行对比分析。

Eigenvalue of stability of coupled shear wall tall building by using ode solver

ODE求解器求解高层双肢剪力墙结构稳定特征值问题

Based on the theory of ordinary concrete shear wall design, simplified static calculation method that apply CS panel structure is established. 2.

以普通钢筋混凝土剪力墙结构设计理论为基础，探讨了适用于CS板式结构的静力简化计算方法。

The papers whose research object is a 14-floor frame-supported shear wall. By establish a 3-dimension finite element model and use the analysis soft-ANSYS, make the study focus on the static analysis.

本文以一幢14层的框支剪力墙结构为研究对象，通过建立三维有限元分析模型，运用大型有限元分析软件ANSYS对结构进行静力分析。

Research on Stiffness Degradation of Concrete Frame-shear Wall

R.C.框架&剪力墙结构抗侧刚度的退化研究

Analysis of Frame-Shear Wall Structure under Earthquake Forces by TI-59

利用TI-59计算器分析地震力作用下的框架剪力墙结构

Through comparing the results between ANSYS and TBSA, a designing software, summarized some questions that we should pay attentions when designing the frame-supported shear wall structure.

通过对有限元分析软件ANSYS与工程设计软件TBSA计算结果的比较，总结出在框支剪力墙结构设计中应该注意的一些问题。

After comparison of the result from pushover and IDA, The structural influencing coefficient and deflection amplification factor of the semi-rigid connected steel frame-steel plate shear wall structures that designed according to building seismic code of China are suggested. 7.

对Pushover分析与IDA分析的结果进行了对比，根据两种分析方法的结果，提出了按照我国规范设计的半刚性连接钢框架钢板剪力墙结构的结构影响系数和位移放大系数的取值。

The block masonry shear wall which combination with Structural column and stem of concrete core columns is a new type of load-bearing walls of body structure which is promoting to use now.

构造柱&芯柱组合配筋混凝土砌块砌体剪力墙是目前工程中正在推广使用的一种新型承重墙体结构。

Analysis of shear wall structures using a type of wall element

用一种墙体单元模型分析剪力墙结构