sheet resistance的例句大全

"Test method for sheet resistance of silicon epitaxial, diffused and ion-implanted layers using a collinear four-probe array"

GB/T14141-1993硅处延层、扩散层和离子注入层薄层电阻的测定直排四探针法

Monitor of Ion Implantation in IC Process by Contour Map of Sheet Resistance

IC离子注入工艺的薄层电阻等值图监控

ITO films with low sheet resistance can be obtained by raising the substrate temperature during deposition or annealing in the inert gases at high temperature.

低电阻率的ITO膜可以通过提高沉积时的衬底温度或高温退火来获得。

The purpose of characterized sheet resistance mapping graph study is to make it clear of the sheet resistance distribution, and increase the analysis effect of test results.

表征薄层电阻的Mapping图的研究目的在于使薄层电阻分布情况一目了然，提高对测试结果的分析效果。

The sheet resistance of antimony-doped tin dioxide thin film coated on soda-lime glass with SiO_2-coated is lower than that of without SiO-coating at the same heat treatment condition.

在热处理温度相同时，预先镀有SiO2膜的玻璃基片上制备的锑掺杂二氧化锡（ATO）薄膜的方块电阻较没有镀SiO2的小。

Results show that the TCR of VOx films was increased, and the sheet resistance was reduced effectively both by Mo-doping and W-doping.

结果表明，Mo原子和W原子掺杂均可有效地降低氧化钒薄膜室温方阻，并且提高薄膜的室温TCR。

The sheet resistance, TVIL and color of ITO films depend on the film thickness.

ITO膜的方阻 、 TVIL和颜色与膜厚有着密切的关系.

This instrument has been used for measuring the sheet resistance distribution for Boron diffusion chip.

并用该仪器测定了硼扩散片的薄层电阻分布.

This instrument has been used to measure the sheet resistance distribution for Boron diffusion chip.

并用该仪器测定了硼扩散片的薄层电阻分布。

The sheet resistance of the films can be controlled by changing doping amount of F ions and choosing favorite process conditions, the minimum is 10 Ω/ □.

通过改变掺杂量和选择合适的工艺条件可控制掺氟SnO2薄膜的方块电阻，其最小方块电阻值达10Ω/□。

Then, the effects of heat treatment and temperature on the chemical composition and sheet resistance of the prepared films were investigated by XRD, EDXS and sheet resistance measurements.

利用X射线衍射和能量散射X射线能谱表征方法，并结合薄膜方块电阻的测定，探讨了热处理方式和热处理温度对薄膜化学组成及薄膜电阻的影响。

For the as-deposited films, the sheet resistance is of inverse proportion function as the sputtering time.

溅射态合金薄膜方块电阻与溅射时间呈反比；

The Capacitor Discharge Mash Resistance Welding for Joining Thin Steel Sheet

薄钢板拼接一次压平电容储能焊工艺

Resistance Welding Between Coil Leading-wire of AC Contactor and Plugging Sheet

交流接触器线圈引出线与插片的电阻焊连接

The microstructure and properties of WC-Ni alloy composite coating manufactured by "Powdered Alloy Sheet" and corresponding steel surface hardening technology were studied by XRD, SEM, wear-resistance or abrasion resistance test etc.

用X射线衍射仪、扫描电镜、摩擦磨损试验等，研究了粉末冶金金属布及其钢表面改性技术在钢表面制备的WC－Ni系合金复合涂层的微观组织和性能。

Zinc coating in the surface of ordinary sheet called zinc-coated sheet, it has good corrosion resistance and was used in the automotive, construction, household appliances industry.

镀锌板是在普通钢板的表面附着一层锌层，使其具有良好的防腐蚀性能。现在已经越来越多的应用在汽车、建筑、家电等行业。

Likewise, delayed fracture resistance of Mn-B type ultra-high strength steel sheet after hot stamping reduces with the rising C content.

Mn-B系超高强度钢板热成形后的延迟断裂抗力同样随碳含量的增加而降低。

The static& dynamic dent resistance of automobile steel sheet

汽车薄钢板静动态局部凹痕抗力

Also, the rare earth plays a certain part in microalloying and ageing resistance of the sheet.

同时, 稀土在钢中还具有一定的微合金化作用及抑制钢板时效的作用.

Resistance spot welding ( RSW) is an major method in modern automobile manufacture industries, it has been widely used in sheet-metal joining for auto-body because the advantage of RSW is inherently properties of the high productivity and the efficient robotization.

点焊是现代汽车制造工业中重要的工艺方法，它具有生产效率高、易于实现自动化而被广泛应用于汽车的焊装线上。