simulation result的例句大全

Based on the established equivalent numerical analysis model of sliding plug door made from composite material and taking use of ANSYS numerical value, we simulate the response of sliding plug door of high-speed train under surface load of 6000 Pa, and validate the simulation result through experiment.

依据已建立的复合材料塞拉门数值分析等效模型，利用ANSYS数值模拟了高速列车塞拉门在6000Pa面静载荷下的响应，并通过实验对模拟结果进行了验证。

The simulation result indicates that carries on the chaos time series with the support vector return algorithm the forecast can obtain better effects compared to other method even, has the very good steadiness and exudes the ability.

仿真结果表明，用支持向量回归算法进行混沌时间序列的预测能够取得比其他方法更好的效果，具有很好的稳健性及泛化能力。

2D energy window technique is used to combine multipath energy from multiple antennas and interpolation to improve timing precision. Simulation result indicates this scheme has a good detection performance.

该方案采用二维能量窗技术对多天线和多径能量进行合并，并利用插值技术提高定时同步的精度，具有较好的检测性能。

Furthermore, simulation results show that the number of evolving solitons does not depend only on integral constant C 0 or C 1. The conclusions in Refs. [ 1] and [ 2] result from the shorter evolving time.

同时计算结果还表明，最终演化成的孤波数目既不完全依赖于积分常数C0，也不完全依赖于C1.文献[1]和[2]所得的结论源于演化时间太短。

The relation between the temperature and the time during the solidification was measured with the thermocouple, which agreed well with the result of the numerical simulation. This proves the simulation result is accurate.

利用热电偶法测量了铸件不同部位在凝固过程中温度随时间的变化，所得模拟结果与实测结果基本一致，验证了模拟结果的准确性。

Simulation result showed that solution to the model was the most conservative whereas ensuring the robustness of the operation of supply chain effectively.

数值仿真结果表明，模型的解是最保守的，但却能够有效地保证供应链运作的鲁棒性。

The simulation result shows DMC-PID cascade control strategy application on high accuracy constant temperature air conditioning system has feasibility and effectiveness, and the control strategy has strong robust stability, tracking performance, anti-disturbance ability characteristics.

通过研究得出：DMC-PID串级控制在空调送风系统和电磁铁设备冷却水系统的应用具有可行性和有效性，且该控制策略具有很强的模型失配时的鲁棒性、跟踪性能以及抗干扰能力。

The improved PCA is applied to mycetozoan fermentation process monitoring and fault diagnosis. The simulation result shows that the improved PCA can avoid the conservation of Q-statistical test and ensure enough information in principal component subspace.

将改进的主元分析法应用于粘菌素发酵过程监测和故障诊断中，仿真结果表明改进的PCA方法避免了Q统计量的保守性，并保证了主元子空间中的信息存量。

Simulation result shows that compared with LAR, the improved protocols can increase the packet delivery ratio and reduce the control packet overhead notably.

模拟结果表明，改进后的协议不仅显著地提高了数据分组投递率，同时有效地减少了网络的控制开销。

The simulation result shows that the dynamic and static characters all meet the normal algorithm and this algorithm is the more ideal control algorithm for realizing the laser light intensity control and then accomplishing the laser frequency control.

仿真结果表明：系统的动、静态性能都符合指标，该算法是实现激光光强控制进而完成激光频率控制较理想的控制算法。

Thermal circuit model of a hybrid integrated power electronic module ( IPEM) is analy-zed in this paper, and then the numerical simulation result of Rth-jc ( the thermal resistance from junction to case) is obtained.

分析了混合封装的电力电子集成模块的热路模型，并且仿真得出了结壳热阻Rth-jc的s数值仿真结果。

The theoretical analysis and numerical simulation result showed that the microchannel cooling system could keep the temperature of the chip with high thermal flux density in a suitable range, which met the thermal control requirement of micro/ nano satellite.

理论分析和数值模拟结果表明，微槽冷却系统可使大热流密度的热源芯片温度维持在较低的范围内，能满足微纳卫星热控的要求。

Based on the numerical simulation result of convective heat transfer, the finite element calculating model of the integrate jacket structure of the cylinder of a thin film evaporator was established, the stress analysis and the intensity calculation of the structure were made using the finite element method.

根据对流传热数值模拟结果，建立了薄膜蒸发器筒节整体夹套结构的有限元计算模型，利用有限单元法进行了结构的应力分析和强度计算。

From the simulation result, it is found that the impact of particle will break the regular crystal lattices of workpiece, and amorphous structures will be resulted. At the same time, elastic-plastic deformation, thermal effect and vibration phenomenon will happen.

仿真结果发现：冲击打破了工件基体的规则晶格，形成半晶状结构，在此过程中还伴随有基体的弹塑性变形、发热以及振动现象。

Finally, our simulation result shows that conventional SOI SBSD-MOSFET can effectively suppress thermionic emission leakage current, but it still can not suppress tunneling leakage current.

最后，我们的模拟发现，普通SOI结构SBSD-MOSFET能有效阻挡来自源结的热电子发射泄漏电流，但仍不能阻挡来自漏结的隧穿泄漏电流。

It has analyzed filling behavior, temperature field changing and defect that might produce and improved the technology utilized the analysis result then received the more ideal simulation result.

对铸件充型过程、温度场变化及所产生的缺陷进行了分析，依据分析结果对工艺进行了改进，最终实现较为理想的模拟结果。

The fitting parameter is adjusted according to the reactor physical calculation or the experiment of power calibration. The simulation result shows that the method can simulate the ex-core neutron instrumentation system accurately in real-time and meets the needs of NPP full-scope training simulator.

根据反应堆物理计算或功率刻度实验确定拟合系数，可以实时准确仿真堆外核测量系统，满足核电厂全范围培训模拟器的要求。

The final result of power system transient stability assessment is obtained. Simulation results on 4 generator 11 bus test system show that the operating speed can be enhanced and the wrong call rate can be reduced if the information fusion model is used.

在4机11节点的测试系统上进行的仿真表明：采用信息融合的模型，能提高运算速度和降低误判率，为在线进行电力系统的暂态稳定分析提供了一条新的思路。

The simulation result based NS-2 simulation software indicates that the algorithm can not only lighten the network burden, but also reduce the call blocking rate.

利用NS-2仿真软件对该算法进行仿真，结果表明，该算法不仅能减轻网络负担，还能降低呼叫阻塞率。

Then, the whole frame and function modules of software design, the debug method and simulation result of the system is given.

然后详细阐述了系统软件设计，包括整体框架及各功能模块的实现过程，并给出了本系统的调试方法和仿真结果。