sintered material的例句大全

Methods: The setting expansion ratio of refractory die material for slip casting core of sintered titanium powder at room temperature was performed, as well as thermal expansion ratio from room temperature to 800 ℃.

方法：采用自制的钛合金粉浆涂塑底层冠用耐火代型材料（基础型），分别测定常温下的凝固膨胀率和室温至800℃的热膨胀率。

Determination of Major Expansion Properties of Refractory Die Material Compatible with Slip Casting Core of Sintered Titanium Powder

钛合金粉浆涂塑底层冠用耐火代型材料的膨胀性能测试

Study on the Pretreatment of Raw Material Influence the Capability of Coal Gangue Sintered Hollow Brick

原材料预处理对煤矸石空心砖性能影响的研究

Study on Choice of Raw Material and Technological Influence Factors for Preparation of Sintered Hollow Brick from Coal Gangue

煤矸石烧结空心砖的原料选择和生产工艺影响因素研究

Preparation of Big-abnormal Shape Sintered Porous Metalic Material

大规格异型烧结金属多孔材料的制备

Main material is teflon fibre or other fibre woven into cloth, which is to be immersed in teflon emulsion, die pressed, and then sintered.

以聚四氟乙烯纤维为主体材料，织成布（或编成填料），浸渍聚四氟乙烯乳液经模具压制成型，进行烧结而成。

So Reynolds number is determined by the theory of porous medium, which can reflect the laminar state of the cooling air. Then the hole rate of the sintered metal porous material and the diameter of the sintered ball can be calculated.

因此，以多孔介质理论来确定Reynolds数，并通过其反映冷却气流的层流状态，来计算烧结金属多孔材料的孔隙率及烧结球的直径。

the final parts sintered by two steps sintering in reducing atmospheres were then infiltrated with copper. the tensile strength of the material reached 480 mpa, elongation ratio 13% and impact energy 140 j.

对还原气氛二步烧结件进行渗铜处理，渗铜件抗拉强度为480MPa，延伸率为13%，冲击功为140J。

study on high temperature properties of free pressure sintered sialon material

常压烧结Sialon材料高温性能的研究

Sintered NdFeB permanent magnetic material has outstanding magnetic properties.

烧结钕铁硼永磁材料具有优异的磁性能.

The effect of MoS_2 content on the friction and wear properties of copper-based cermet material was investigated. The result showed that MoS_2 was decomposed S and Mo during sintered;

研究了MoS2在铜基摩擦材料中的作用，结果表明，作为润滑组元加入的MoS2并非以MoS2的形式影响摩擦材料的性能。