sliding motion的例句大全

An appropriate control law was selected that forces the system states to reach the sliding manifold in finite time and has low chattering in the sliding motion.

选择适当的动态不连续控制律保证了系统状态在有限时间到达滑模面，并有效的削弱了抖振。

The vibration-sliding motion process of a caisson breakwater is simulated by the model, and the effects of the caisson slide on the displacement. rotation, sliding force, and overturning moment are investigated.

用本文模型和方法对一沉箱防波堤在破碎波作用下的运动过程进行了计算，并分析了沿基床顶面的滑移对沉箱位移、摇摆角、滑移力和倾覆力矩的影响。

But the visual representations of the sliding motion are somewhat different.

但是手指滑动动作的视觉表现形式有所不同。

This paper analyzes the models involved in the correlation between crash velocity and throwing distance based on motion law of throwing objects ( i.e.glass splinter). The generalized throwing motion law that is composed of parabolic motion, spring motion and rolling sliding motion is revealed.

基于抛物运动的各种运动成分描述，分析了道路交通事故汽车碰撞速度与抛物距离之间的各种关系模型，揭示了包括经典抛物方程、弹跳运动和滚动&滑动运动模型的广义抛物运动规律。

The sliding motion implies that Titan's surface was a bit like damp sand.

这套滑移动作表明泰坦表面有点像湿砂。

Therefore, two channels were placed underneath the switchboard to facilitate the sliding motion.

因此，工人将两条长角铁置于配电箱底部，方便运送。

Simulation results with this two-dimensional model show full sliding motion and stick-slip motion which may appear with some proper parameters.

数值仿真结果显示，在一定的参数状况下滑动导块有可能出现爬行运动状态。

The Lagrangian equations of sliding motion are derived analyfically detailed results for sliding interfaces are described.

推导了滑移运动的拉格朗日方程。详细描叙了滑移面的结果。

While the reaching condition was initialization the equivalent control equation of axial-radial variable structure control and sliding motion equation were given.

在满足滑模存在条件下给出轴向径向变结构等效控制方程及滑模运动微分方程，并作了初步实验探讨。

The low-temperature peak rose with increasing quench temperature because relatively high quench temperature produced relatively coarse twins whith were favorable for the sliding motion of the twins.

低温峰在淬火温度为700℃时有一最小值之后随淬火温度的升高而升高，因为在较高温度淬火可产生较大尺寸的孪晶，从而有利于孪晶畴界的移动。

The roller method can be used in the measurement for a large scale diameter of a workpiece, but the sliding motion of the roller on the workpiece would induce more errors.

滚轮法用于大型工件的直径测量时，由于滚轮和被测工件之间产生的滑失现象造成测量误差较大。

The variable structure controllers are designed to force the systems to remain in the sliding motion, and the results are presented to guarantee the mean-square exponential stability of switched systems under asynchronous switching.

设计了使系统处于滑动模态的变结构控制器，并得到了保证系统在异步切换下稳定的结果。

It also derives and solves the differential equation expressing the sliding motion of the particle, and hence ascertains the phase angle where the particle is about to leave the edge of the bucket during discharging.

推导颗粒运动微分方程并求解，从而确定卸料时物料颗粒脱离料斗边缘时的料斗相位角。

When the gastric mass had no sliding motion against the pancreas or partial sliding motion with a disrupted echogenic fat plane between the two organs ( negative sliding sign), patients were considered to have pancreatic invasion.

当胃肿块沿胰腺表面没有滑动或有部分滑动但胃和胰腺间脂肪层破坏时（滑动征阴性），则认为胃癌侵及胰腺。

His sliding motion, his attitudes, his mysterious and rapid gestures, caused him to resemble those Twilight larvae which haunt ruins, and which ancient Norman legends call the alleurs.

他那种滑动，那种神气，那种敏捷而神秘的动作，就象黄昏时在荒丘间出没的那种野鬼，也就是诺曼底古代传奇中所说的那种赶路鬼。

Using air bearing to decrease frictional force of the axle of the roller and fine adjustment mechanism to parallel the axle of the roller with the axle of the workpiece will reduce sliding motion of the roller and improve the accuracy of the measurement.

在采用空气轴承，减小滚轮轴摩擦力，调整微调机构使滚轮轴与工件轴平行的正确方法之后，滑失现象减小，测量精度有所提高。

The optimal control technique is employed to construct sliding manifold, so the sliding motion is optimized. The stability of the optimal sliding motion is analyzed.

将时滞系统的最优控制原理用于滑模面的构造，优化了滑动运动，并分析了最优滑动模态的稳定性。

Furthermore, the optimal control theory is adopted to construct nonlinear sliding manifold. The dynamics of sliding motion could minimize the given quadratic performance index and is robust to uncertainties with known upper bounds. 5.

进而运用非线性系统的最优控制原理设计滑模面，使得滑动模态满足给出的最优二次型性能指标的要求，同时滑动模态对于已知上界的不确定性具有完全地鲁棒性。

The control strategy can guarantee the existence of the closed-loop system's sliding phase, furthermore, based on which, global stability of sliding motion on sliding surfaces is proved.

该控制策略保证闭环系统滑动阶段的存在性，并在此基础上证明滑动模态运动的稳定性。

Such small tolerances require careful design and machining of the graphite boat and slider so that the sliding motion is smooth and without jitter.

这样小的公差要求仔细设计和精心加工石墨舟皿和滑动器，从而使滑动器的滑动平滑而没有跳动。