solid particle的例句大全

Studying of solid particle effects on three dimensional jet/ freestream flow field with particle simulation method

三维喷流流场中固体颗粒效应的粒子仿真方法研究

combination effect of nozzle gas distributor and particle properties on gas-solid flow behaviors in cfb risers

喷管型气体分布器和颗粒物性对提升管内气固两相流动行为的联合影响

the main factors for the leaching contain the concentration of ammonia and ammonium sulfate, temperature, the liquid-to-solid ratio and particle size.

在氨-硫酸铵溶液中，影响低品位氧化铜浸出速率的主要因素为氨和硫酸铵的浓度、反应温度、液固比和矿物粒度。

The fluidization characteristics of different particle size of spherical copper particles in water as medium were investigated in a 40 x 15 mm rectangular solid-liquid fluidized bed.

以球形铜颗粒为原料，水为流化介质，在横截面为50mm×15mm的液固流化床中，考察不同平均粒径铜颗粒的流化特性。

The microstructure of particle in Al-Si alloy mainly consists of block supersaturation solid solutions with different contents of silicon.

Al－Si二元合金中，细小颗粒的微现组织主要由不同Si含量的块状过饱和固溶体组成。

The model is developed for AP-based composite solid propellants can be used to explain plateau, mesa and normal burning behavior and to analyse the effect of initial temprature and AP particle size on burning behavior.

该模型可用于包括易熔粘合剂在内的AP复合推进剂。具有能说明平台、mesa和正常的燃烧行为，分析初温、AP颗粒尺寸对燃烧特性影响的能力。

The results show that the friction loss increases with the increase of the particle diameter, density, volumetrical concentration of the solid phase and the velocity of liquid phase.

计算结果表明，摩擦损失随固相颗粒直径、密度、浓度和液相速度的增大而增加。

stability analysis on particle uniform distribution in cocurrent-up gas-solid flow

气固并流上行流动中颗粒均匀分布的稳定性

Liquid film flow field in gas-liquid-solid three phase flow through a curved pipe were measured by Particle Image Velocimetry ( PIV) for a better understanding of the phase separation phenomena.

为了深入认识螺旋管内多相流相分离现象，应用粒子图象测速仪（PIV），对组合弯管内气水砂三相流底部水平段和上升段中液膜区的流场进行了测量。

Particle Image Velocimetry ( PIV) was used to investigate particle velocity field in a riser of gas-solid circulating fluidized bed.

利用粒子图像测速仪（PIV）对循环流化床中颗粒流场进行了系统的实验研究。

A judgment criterion of polymer particle agglomeration in gas solid fluidized bed was presented.

为了考察流化床内颗粒团聚结块的过程,提出了一种气固流化床团聚结块的判据.

A design of measuring system for solid state particle in transparent liquid

透明液体中固态粒子测量系统设计

The capacity of the plant reached 60 kt/ a with improved technical and economic indexes and decreased effluent by transforming feed from pyrite to solid sulphur particle and replacing some equipment.

通过将工艺原料改为固体颗粒硫磺及更新设备，装置生产能力达60kt/a以上，改进了技术经济指标，减轻了环境污染。

Particle imaging velocimetry of instantaneous velocity and concentration distributions in gas-solid two-phase jet flows

气固两相射流瞬时速度场和浓度场的PIV研究

We built, with our hands, a set-up of particle sizer with an all-solid-state Nd: YAG laser replacing the more conventional large-frame He-He laser, and a linear CCD array instead of the traditional concentric semi-ring shaped photoelectric detector.

采用全固态倍频Nd：YAG激光器取代传统的He-Ne激光器作光源，以一维线阵CCD取代传统的同心环光电探测器作为光信号探测器，自行搭建起一套测量微粒粒径分布的光电实验装置。

effects of buoyant particle characteristics on solid-liquid suspension and gas-liquid dispersion in a three phase stirred tank

上浮颗粒特性对三相搅拌槽内固-液悬浮及气-液分散的影响

By adopting blended stock regression design, building particle grade model and optimizing grade ratio, optimum particles grade can be gained, content of solid phase of suspended system can be increased simultaneously.

采用混料回归设计，建立颗粒级配模型，优化级配比例，获得了最佳颗粒级配，提高了悬浮体系的固相含量。

A comparison test of selected solid cone nozzles with spiral nozzles has been carried out, the variation rule of atomized particle size and distribution rule of atomized particles for swirl nozzles being systematically studied.

选择实心锥喷嘴和螺旋喷嘴进行对比试验，系统地研究了旋流喷嘴的雾化粒径变化规律和雾化粒度分布规律。

Particle Flow Patterns in a Gas-Solid Cocurrent Downflow Fast Fluidized Bed

气固并流下行快速流化床反应器颗粒运动规律的研究

It was showed that reaction temperature, coal particle size and heating rate had important influence on CaS generation by gas and solid productions analyses.

磷石膏分解的固相产物及气相产物分析表明，不同高硫煤粒径、反应温度、升温速率等条件对CaS生成具有重要影响。