solid velocity的例句大全

The crosscorrelation technology was used to measure solid velocity.

采用互相关技术测量固体的流速.

The experimental results show that the method can satisfy the need of solid velocity measurement.

结果表明:这种方法可以满足固体速度测量的需要.

To improve solid velocity measurement precision, the essential method for processing two-phase flow signals is described based on independent component analysis ( ICA).

为了提高固体速度测量精度，提供一种基于独立成分分析（ICA）处理两相流信号的基本方法。

The effect of operation pressure on the specific impulse of tactical missile solid motors is analyzed from several factors, such as characteristic velocity, thrust coefficient, impulse coefficients of the chamber and nozzle.

从固体发动机的特征速度、推力系数、燃烧室冲量系数和喷管冲量系数等因素出发，分析了发动机工作压强对战术固体火箭发动机比冲的影响。

Gas-solids velocity profiles and slip phenomenon in a cocurrent downflow circulating fluidized bed

并流下行循环流化床中气固速度剖面以及滑落现象的研究

That solid matter in liquid, velocity and flow type are three key factors to cause surface device utilizing in gas well with high pressure and high rate to drive liquid.

流体中的固体颗粒、流动速度和流动方式是造成高压高产气井排液期间地面设备损坏的三大关键因素。

Desulphurization reaction velocity and reaction efficiency can be improved preferably in gas-liquid-solid three-phase.

在气-液-固三相条件下进行的脱硫反应，可以较好地提高反应速度和反应效率。

According to turbulent velocity distribution in the pipeline with fixed bed, combining solid particle storting terms, the storting velocity model is obtained and some examples are used to analyze the influence trend of effect factors.

根据具有静止堆积层的管道紊流速度分布，并结合固体颗粒的起动条件，得到了计算起动速度的计算模型，并用实例计算分析了影响因素对起动速度的影响趋势；

The effects of the filling velocity and gate shape and located position on semi-solid forming quality and flow patterns were investigated with simulation.

对不同充填速度、浇口形状以及浇口设置位置下半固态成形过程进行模拟分析。

The formulae of contact stress and sliding velocity of solid-lubricated ball bearings are deduced by Hertzian contact theory and kinematics of ball bearing.

根据赫兹接触理论和运动学基本原理，推导了固体润滑球轴承的接触应力和滑动速度公式。

Liquid-solid circulating fluidized bed(ⅱ) studies on the apparent slip velocity and drag coefficient

液固循环流化床的研究（Ⅱ）表观滑落速度及曳力系数

Local Gas-Solid Slip Velocity in the Riser of the Circulating Fluidized Bed

提升管循环流化床气、固局部滑落速度的分布

Local gas-solid slip velocity in riser

提升管中气固相的局部滑移速度

The simulation also show that the averaged velocities of the molecules are largely distributed linearly, but there is a slip velocity at the solid liquid interface.

薄膜中润滑剂分子的平均速度仍大体呈线性分布，但在固液界面和液体层间可以观察到滑移现象；

The experimental results of the apparent slip velocity between liquid and solid show that there is a great difference between the experimental results and the theoretical calculated values based on the generalized fluidization relationships.

液固两相表观滑落速度的实测结果表明，实验结果与广义流态化方法的预测值间存在较大的差异。

As the increase of velocity, the axial velocity is not as uniform as on it's low velocity, the tangential velocity become higher, the gas-solid slip velocity increase appreciably.

随着速度的增加，同一截面内轴向速度的均匀化程度降低，而切向速度有渐增的趋势，气固滑移速度略微增大。

This may be a testament to his belief in his fastball, which is a very solid pitch with plus velocity.

这也许是他对他的快速球有信心的证明，他的快速球拥有略高于平均值的球速，是一颗很有威力的球种。

Result shows that with high velocity and light loads, the frictional and wear mechanism is slight abrasion wear due to the generation of dispersion strengthened intermediate harden phase and solid lubricative oxide during the process of friction.

在高速轻载时，Ni-Fe-W合金镀层在摩擦过程中会生成有弥散强化作用的中间硬质相和起固体润滑作用的氧化物，使其磨损表现为轻微的磨粒磨损。

The solid circulating rate keeps constant when the superfacial liquid velocity changes within the circulating fluidization regime.

颗粒循环速率的研究表明，在循环流态化区域，在一定的二次水流速下，颗粒循环速率不随总液速的改变而改变。

However, increasing the superfacial gas velocity can promote the expansion of the GS bed, and decrease the solid holdup.

空塔气速的增加促进了气固磁稳定床的膨胀，使得固含率减小；