solidification process的例句大全

numerical simulation of mold filling and solidification process of an h-shape steel billet in water cooling permanent mold

H型钢坯水冷金属型铸造充型凝固过程数值模拟

The layer structure is easily formed in the solidification process of immiscible alloys.

液相互不溶型合金系凝固过程中易形成分层组织.

And the microcomputer system has beensuccessfully used in the investigation of DD 3 SC superalloy solidification process.

并将该微机系统成功地用于DD3单晶高温合金凝固过程的研究.

The numerical modeling of solidification process is moving from macro-to micro-modeling.

凝固过程的数值模拟正在由 宏观 向微观转变.

Oxidation and aromatization phenomena in solidification process of asphalt paint

沥青清烘漆热固化过程中的氧化与芳构化

Summary of cement solidification process for borated waste solutions

含硼废液水泥固化技术综述

Effects of the liquid structural change on crystallization orientation were investigated. It is found that the melt after the liquid structural change preferably grew on the high index crystal plane with the solidification process, which was responsible for the branching of low index single crystal plane.

液-液结构转变对晶体生长取向的影响主要是随凝固长度增加，液-液结构转变使合金实现高指数晶面取向，加剧了低指数晶面分支现象。

Experimental study of thermal convection during the water solidification process in cylinder cavity

圆柱腔体内水凝固过程热对流实验研究

This paper introduces Mould-Temperature-Control ( MTC ) forming technology and the numerical simulation of its application in solidification process.

首先介绍了模具温控成形技术的方法和工艺. 然后具体到凝固成形,分析了其数值模拟的研究现状.

Progress of Dendritic Morphology Evolution during Solidification Process

凝固过程中枝晶组织形貌演变模拟进展

The nucleation model of the hypoeutectic, eutectic and hypereutectic spheroidal graphite iron is developed considered with their solidification process respectively.

针对不同类型的球墨铸铁的凝固过程，建立了亚共晶、共晶和过共晶球墨铸铁的形核率计算模型。

The solidification process of liquid metal int he CASTEX technique was studied by FEM ( finite element method ).

利用有限元法研究了 连续铸 挤工艺中液态金属的动态凝固过程.

The optimization on the filling and solidification process of CY-61100 lathe tailstock casting was conducted by numerical simulation.

对CY-61100车床尾座铸件充型及凝固过程进行了数值模拟及优化研究。

Computer simulation tests of the solidification process of concast thin slabs were conducted in a twin block chain caster and reliability of the solidification process model was confirmed.

本文对双履带活块循环式薄板连铸过程进行了计算机模拟。

the effect of power ultrasonic on the solidification process of babbit was investigated.

研究了功率超声对巴氏合金凝固过程的影响.

Using differentiated thermal analysis quenching method, the solidification process of CG cast iron with various percentage of compacted graphite particles is investigated.

本文应用微分热分析液淬法研究了不同蠕化率蠕铁的一次结晶过程。

Instability of flow due to complex heat exchange and density variation leads to strong thermal convection in liquid region during the water solidification process. At the end of solidification process, intensity of flow decayed and the stable structure was rebuilt.

因为存在着复杂的热交换和密度变化，水在凝固过程中存在流动结构失稳，使得液相区内发生强烈的热对流.最后流动强度减弱，重新形成稳定结构。

Coupled Thermo-Mechanical Analysis of the Dimensional Accuracy for the Solidification Process of Casting for Rapid Tooling

RT工艺凝固过程中铸件尺寸精度的热力耦合分析

Thermal study on the steel solidification process in the hot-top of 610 type ingot mould

610型镇静钢锭帽口凝固过程的热工研究

Based on the numerical simulation and real casting experiment, the influence of the slot gate system on the filling and solidification process of the cylindric magnesium alloy casting is studied.

本研究利用数值模拟技术和实际浇注实验研究了缝隙式浇注系统中缝隙宽度、缝隙长度、立筒直径、缝隙形式和冷铁设置等因素对圆筒形镁合金铸件充型和凝固过程的影响。