solvent drying的例句大全

The results are as follows: Organic solvent tert-butyl alcohol ( TBA) can accelerate drying process, shorten drying time, and the effect of concentration 10% is more notable than 5% one.

实验结果表明，有机溶剂叔丁醇可以加速冻干过程，缩短干燥时间，并且浓度为10%的比5%的显著。

Based on this model, solvent diffusion coefficient D, thin film coating solvent concentration distribution and adhesive thin layer drying curves in different condition is predicted.

最后，研究利用此模型对胶层内溶剂扩散系数D、薄膜涂层溶剂浓度分布及不同干燥温度和不同薄膜厚度下胶粘剂薄层干燥曲线做出预测。

Ultrahigh molecular weight polyethylene fibers ( UHMWPE) of different gel concentration were prepared using gel spinning process followed by solvent extraction, drying and drawing.

采用凝胶纺丝工艺制备了具有不同质量分数的超高分子质量聚乙烯凝胶纤维，并对其进行了萃取干燥和后拉伸等处理。

The OIS, after molding and drying, gives easily transparent, solvent resistant membrane and high elastic fiber, those are actually the organic inorganic hybrid polymers.

OIS经成型和干燥后即可方便地形成耐溶剂性的有机无机杂化高分子材料，如透明薄膜和高弹纤维。

In gravure printing techniques, the correct drying parameter is not only the key to good quality of printing image, but also the assurance of making remaining amount of solvent accord with the hygienic requirements.

在凹印工艺中，合适的干燥参数不但是印品成像质量的关键，也是溶剂残留量符合卫生要求的保证。

Make multinomial regression analysis experiment by MATLAB, establish mathematics model on the parameter of press products convention drying and remaining amount of solvent. Optimize the parameters to minimize the energy on condition that printing quality and remaining solvent are eligible.

运用MATLAB软件对实验数据进行多项式回归分析，建立印品对流干燥参数与溶剂残留量的数学模型，并在印刷质量、溶剂残留均合格的前提下，优化各参数使能耗最小。

need to add is that in the oven in the drying process, requiring the adhesive solvent cleaner, the better.

需要补充的是，在烘道内干燥过程中，要求胶黏剂中的溶剂挥发越干净越好。

solvent is slow, and there is not enough trabeculectomies curing and drying is not good, the bad viscous resistance and so on.

溶剂挥发太慢，又会引起干燥不足结膜固化不好，抗粘性不良等问题。

solvent release: solvent during drying process of evaporation .

溶剂释放：溶剂在干燥过程中的蒸发。

a good solvent release, to facilitate rapid drying.

有良好的溶剂释放性，以利快速干燥。

Drying quality binders with resin and dissolved in a solvent for resin.

潮湿质量同拆开料洋的树脂和固结树脂的溶剂有关.

Drying: solvent washing Edition to restore the original size printing plate thickness.

烘干: 去不兴洗版溶剂,使印版复兴原来尺寸厚量.

Solvent-based on different coatings formulation, the different types and solvent coating, drying of volatile at.

溶剂型上光涂料因不同的涂料配方, 所用的溶剂种类及比例不同,涂布 、 干燥过程中挥发速度也不同.

Gravure printing ink drying of fast and slow, depending on the speed of volatile solvent inks.

凹印油墨干燥的快慢, 主要取决于油墨溶剂的挥发速度.

Ink solvent too fast or ink drying inhibitor little ink.

油墨中溶剂挥发太快或墨中干燥抑制剂少,油墨不合适.

To treat tetramethyl ammonium chloride with H2SO4 in organic solvent, a precipitate is produced. A white crystallizing solid TMAHS is prepared after filtrating, washing and drying.

以H2SO4处理四甲基氯化铵的有机溶液，立即生成沉淀，经过滤、洗涤、干燥后，得到白色结晶状固体&TMAHS。