spindle speed的例句大全

Machining Center with Mechanical Accuracy 3 μ m under the Spindle Speed 20 000r/ min

在20000r/min的高转速下机械精度为3μm的加工中心

Among them, the influence of spindle speed to cutting force is due to the impact of the spindle speed to processing system stability.

其中，主轴转速对切削力的影响是由于主轴转速对加工系统稳定性的影响。

High speed and high precision machinery should have not only high spindle speed and high feeding speed, but also high spindle and feeding system acceleration.

高速高精度机床不仅要有高的主轴转速和进给速度，而且还需要具有高的主轴和进给系统运动加速度。

Drilling axial force may decrease with the increasing of spindle speed, and the corresponding will get obviously with the increase of feed speed.

钻削轴向力随着主轴转速的增大而减小，随着进给速度的增大而相应的增大。

All spinning parameters are computer controlled including draft, count, twist direction, twist level, traverse and spindle speed.

所有纺纱参数由电脑控制，包括：牵伸、数、度方向、度水平、复动程和锭子速度。

In this paper, a type of NC lathe's main transmission agent by using a frequency modulation AC Spindle Motor and a tree speed gear box to make the spindle speeds be stepless change was present.

介绍一种以交流变频调速主轴电机驱动、串接一个3档分级变速机构，实现主轴无级变速的数控车床主运动传动系统。

Repetitive Control and Its Applications to Variable Spindle Speed Noncircular Turning

重复控制及其在变速非圆车削中的应用

A system for adaptive optimization of cutting parameters such as feed rate and spindle speed in a face milling operation for maximizing the material removal rate without violating machining constraints is set up.

基于以上算法，构造了平面铣削加工参数自适应优化系统，可使加工系统在不违反加工约束的前提下，总是获得最大材料去除率。

The soft-sensing model based on BP neural network is built up, using the spindle's stator-voltage, stator-current, no load current and spindle speed as secondary variables.

采用电主轴定子电压、定子电流、空载电流和主轴转速作为辅助变量，建立了基于BP神经网络的负载扭矩软测量模型。

Self-controlled stroke drilling head, the Spindle speed-reducer is imported from Germany.

自控 行程钻削动力头, 配备德国进口专业主轴减速电机.

With the increasing of spindle speed and feed speed, the wear and tear will gradually get fierce.

随着主轴转速和进给速度的增大，钻头的磨损会逐渐加剧。

Investigation on Rapid Recognition of Stable Cutting Spindle Speed

稳定切削主轴转速的快速识别

Spindle Speed& Control System for STD Bus NC System

STD总线数控系统主轴实现自动变速

Control of NC Machine Tool Spindle Speed by Frequency Conversion

数控机床主轴变频调速控制

Through single factor experiments, the effects of spindle speed and axial thrust on machining efficiency are presented.

通过单因素实验，研究了主轴转速以及轴向工作压力对加工效率的影响。

With the increase of spindle speed, cutting force has slow down.

随着主轴转速增加，拐角切削力缓慢减小。

Monitoring of Milling Tool Breakage Using fluctuation Signals in the Spindle Speed

用主轴转速波动信号在线监测铣刀破损状态

The spindle speed, feed rate, NC program, machine switch machine time information acquisition.

实现了对主轴转速，进给速度，NC程序，机床的开关机时间的信息的采集。

Multiple axes rotary spindle head driven directly by torque motor is an ideal solution to realize high-speed of5-axis CNC machine tool.

力矩电动机直接驱动双摆头是实现五轴联动数控机床高速化的新形式。

Developing hydrostatic cutter spindle head for high speed gear shaper

高速插齿机静压刀架的研制