spinning process的例句大全

Rotating acceleration has inevitable influence on the work process of Solid Rocket Motor: flow of combustion chamber and nozzle is changed; the pressure, mass flow rate and the specific impulse of Solid Rocket Motor are affected by the spinning.

旋转产生的加速度必然对固体火箭发动机的工作过程产生影响：使燃烧室和喷管中的燃气流动发生变化，对燃烧室工作压力质量流率及冲量产生影响。

Adopt the spinning formation process, for the inner cylinder and outer jacket of stainless steel vacuum thermos, can saved raw materials, eliminated work steps and the investment of models.

真空不锈钢保温容器的内胆身及外壳采用旋压工艺成形，可节省原材料，减少加工工序及模具投资。

Plasticized melt spinning of HMWPE ⅱ. drawing process and structure and properties of fibre

高相对分子质量PE的增塑熔融纺丝Ⅱ.拉伸工艺和纤维的结构性能

Three-dimensional numerical simulation of the combined process of stretch spinning and drawing for the overlength circular cone pipe without mandrel

超长圆锥管无芯模旋拉过程的三维数值模拟

Production process modules for quality tracing in spinning

纺纱生产工艺质量跟踪模块

3D deformation pattern picture, the stress and strain of tube surface and regularities of distribution of spinning force during the process of three-roller synchronous hot backward spinning are investigated.

研究了三轮同步热反旋过程中的三维变形图，管坯表面应力、应变以及旋压力分布规律。

Influence of process parameters on tangential strain in tube spinning

筒形件强旋工艺参数对金属切向流动的影响

The effects of process parameters, such as spinning temperature, filter precision of spin pack, drawing temperature, draw ratio, on fuzz number were discussed for 75 dtex/ 96 f superfine PET FDY.

讨论75dtex/96f涤纶超细FDY纺丝生产中纺丝温度，组件过滤精度，拉伸温度，拉伸倍数等工艺参数对毛羽的影响。

The influence of process condition such as spinning pack, cooling condition, collection oiling, annealed zone, drawing condition etc on products quality were expounded.

探讨纺丝组件、冷却条件及集束上油、缓冷区、拉伸工艺等条件对产品质量的影响。

The results showed that the change of raw material, production load, production process parameters and other abnormal factors will do damage to the melt evenness, spinning stability and yarn quality.

研究表明：原料的改变，生产负荷的改变，生产工艺参数的改变及其他一些异常因素都会影响熔体的均匀性，纺丝的稳定性和丝的品质。

the characteristics of process technology and major equipments for 100 t/ d pet staple fiber direct spinning line imported from zimmer co. ( germany) were analyzed and its structure and performance as well. the advantage and defects were both compared.

分析了德国吉玛公司100t/d涤纶短纤维熔体直纺生产线的工艺与主要设备的特点、结构及性能，比较了其优点和不足之处；

Study on drawing process of dry-jet wet spinning of PAN fiber

干-喷湿纺聚丙烯腈纤维拉伸工艺研究

Reasonable material choice and reasonable manufacture process of cycloid not only meet the needs of spinning forming for roller sleeve, but also lengthen the service life of cycloid and reduces production cost of roller.

对旋轮进行合理的选材和制定合理的制造工艺不仅可以满足托辊套筒的旋压成型要求，而且可以延长旋轮的使用寿命，进而降低托辊的制造成本。

Making full use of the flexibility of this NC machining center, this forming process can make adjustments of all the parameters, such as the final shape of parts, forming course, spinning speed and roller feeding speed, to obtain the optimum process parameters.

该成形工艺充分利用了数控加上中心的柔性可对零件的最终形状、成形的轨迹、旋压的转速、滚轮的进给速度等参数进行调整，获得最佳的工艺参数。

Study on Water Simulation of Spinning Rotor Process for Aluminium Alloys

铝合金旋转喷吹工艺的水模拟研究

Domestic spinning rotor technology need to be exploited both in the sense of melt treatment process itself and comparing with overseas advanced degassing equipments was pointed out in the end.

最后指出无论从铝合金熔体处理本身的需要，还是与国外的先进除气设备相比，国内的旋转喷吹净化技术都有待开拓。

Preparation for spinning solution is an important part in the process of polyacrylonitrile-based carbon fiber production.

纺丝溶液的制备是聚丙烯腈基碳纤维生产中的一个重要环节。

The effects of process parameters on the fiber morphology were analyzed, such as spinning solution concentration, voltage, deposition distance, extrusion rate.

分析了纺丝液浓度、电压、接收距离、挤出速度等因素对纤维形态的影响。

Analysis is made on the testing parameters of structure and characteristics for the polyester POY of different filament titer spinning under the speed of 3600m/ min, with stress on the spinning stability and the performance for post-processing.

本文对3600m/min纺速下纺制的不同单丝线密度的聚酯POY的结构特征参数进行了测试分析，着重分析了细旦聚酯POY的纺丝稳定性和后加工性能。

How to Realize Automatic Control Over the Process Air Conditioning of Spinning Unit

论如何实现纺丝空调的自动控制