step size的例句大全

To solve such prob-lems, both the search direction and the step size are two crucial elements in numerical algorithms, such as the alternating least squares algorithm ( ALS).

求解这类问题的数值方法如交替最小二乘算法具有两个关键要素：搜索方向与步长因子。

A Modified LMF Algorithm with Variable Step Size for Multi-user Detector

可变步长LMF自适应多用户检测器

A Variable Step Size BLMS Adaptive Algorithm in Time Domain

一种时域变步长BLMS自适应算法

New Variable Step Size Constant Modulus Algorithm Based on Hyperbolic Tangent Function

基于双曲正切函数的变步长盲均衡算法

A new BFGS type formula and a new BFGS type method with weak Wolfe Powell ( WWP) step size rule are presented.

给出新的BFGS型公式，并利用弱的Wolfe-Powell步长准则给出新的BFGS型方法。

The effect of relevant process parameters, namely tool radius, sheet thickness, step size, wall angle, yield stress and hardening exponent, upon their intensity was statistically analyzed.

对工具头半径、板厚、加工步长、成形角、屈服应力和加工硬化指数等参数对成形缺陷的影响程度做了计算。

Linear constrained differential constant modulus algorithm ( LCDCM) is an effective solution to the problem of interfer capture in constant modulus algorithm ( CMA). But its performance is suffered from improper selection of iteration step size ( ISS).

线性约束差分恒模算法（LCDCM）能有效克服恒模算法（CMA）中存在的干扰捕获问题，但其性能受迭代步长的影响。

An explicit high-order Runge-Kutta method to solve the motion differential equations for accurate cloth simulation is presented. By use of embedded cash-karp runge-kutta formula, the algorithm is further optimized on the side of auto-adjustment for step size and error control.

针对具有高精度要求的织物动态仿真，提出利用显式Runge-Kutta高阶方法解决仿真过程中运动微分方程的求解问题，并采用内嵌的Cash-Karp计算格式，从自动调整步长和控制精度两方面优化算法。

The hardening exponent appeared as the most influential parameter for the development of bulge. The bulge height showed increase with increase in hardening exponent, sheet thickness and step size and decrease with increase in wall angle.

加工硬化指数是产生底部凸包现象相关性最大的因素，上凸的高度随加工硬化指数、板厚和加工步长的增加而增加，随成形角的增加而减小。

In order to avoid such a failure, an empirical model in terms of four process parameters, namely sheet thickness, step size, wall angle and yield stress, was developed to compute the minimum safe limit of tool radius.

为了避免这种失效，本论文中提出了一个以板厚、加工步长、成形角和屈服应力为变量的经验公式，以计算工具头半径的最小值。

The ASPC algorithm is based on a modification of the transmitted power update step size.

ASPC算法是基于改变功率控制步长的可变步长功率控制算法.

It was found that metallic wall and fold-in appear only when thick sheet is processed with small radius tool. And after their appearance, their intensity increases as the wall angle, step size and yield stress increases.

结果发现挤出飞边和向内褶皱在使用小工具头加工厚板的时候容易出现，其程度随成形角、加工步长和屈服应力的增长而增大。

this fact leads to the necessity for a rule of self-adaptation of the mutation step size.

这一事实导致的必要性规则的 自我 适应突变步长.

I repeated the previous step again using the same size text and a blue hippy van.

我重复了之前的步骤创建了蓝色的同尺寸文字层.

This paper reports a single-step synthesis of monodisperse magnetite nanoparticles with particle size of 8 nm.

本文报道了一种颗粒大小为8纳米的单分散性磁性纳米颗粒的一步合成法.

This step breaks down the organic material to usable-sized molecules such as sugar.

此步骤将有机物质分解为可以使用的分子,例如糖.

The experimental study on physical parameters of gingko is conducted. The structural size, compressive crushing load, critical compression and density of gingko core are measured. The tests showed that the gingko core could be classified into 4 grades by step of 1 mm.

对银杏核的结构尺寸、压缩破坏载荷及临界压缩变形量、密度等物性参数的测定表明：银杏核分级时以级差1mm、分级数以4级为宜；

Variable step-size LMS algorithm can improve the performance of PIC.

变步长LMS算法 可显著提高自适应并行干扰抵消器的性能.

In order to verify the analysis results, static test on two spatial full-sized solid models is carried out, and the step-by-step load apply system is adopted to find out the stress and strain value of each testing point.

为验证计算分析结果，对两个受力较大的铸钢节点进行了足尺实体静力试验，采用分级加卸载制度获取各级荷载下各观测点应力应变值。

However, the insistency between convergence speed and steady state error is difficult to be solved by the fixed step-size LMS.

但其固定的步长导致了收敛速度和稳态误差之间的矛盾。