stiffened plate的例句大全

prediction of welding deformations of stiffened plate based on inherent strain

基于固有应变的加筋板焊接变形分析

penetration probability of stiffened plate-grid under shock loading

冲击载荷作用下加筋板架破坏概率分析

study on failure mode of stiffened plate and optimized design of structure subjected to blast load

爆炸载荷作用下加筋板的失效模式分析及结构优化设计

The transmission of flexural wave through a periodic stiffened flat plate is analyzed using wave analysis method. The wave propagation equation of periodic stiffened plate is derived. The dependence of the propagation constants of vibration frequency and flexural wave incident angle is analyzed.

本文采用波动分析法分析了周期加筋板中的弯曲波传播，推导了周期加筋板的波传播方程，分析了振动频率和平面弯曲波入射角对传播常数的影响。

Stiffened plate is widely used in aeronautic, marine, architectural and mechanical fields.

加筋板结构已被广泛应用于航空 、 航海 、 建筑和机械等工程领域.

Experimental analysis and finite element calculation of crack growth in a stiffened plate structure

加筋板结构止裂数值计算与实验研究

The strengthened function of the stiffened plate structure is confirmed.

验证了加筋板对结构的加固作用。

Noise Reduction of Stiffened Plate Using Additional Mass Technique

利用附加质量法降低加筋平板声辐射

Optimization Design of Damage Resistance for Rivet Stiffened Plate with Crack

含裂纹铆接加筋板抗破损能力的优化设计

Study of vibration mechanism of plate and stiffened plate with viscoelastic damping treatment

敷设粘弹性阻尼的板和加筋板的振动机理研究

Study on the Plate assembly Effects on Edge stiffened Plate Elements in Design Approach of Effective Width to thickness Ratio

边缘加劲板件有效宽厚比设计方法中的板组效应研究

It turns out that in the case of the reinforced ribs with low rigidity, for both one-way stiffened plate and double-way plate, the maximum of displacement and velocity in X and Y axes are much larger than those in Z axis. 4.

结果表明，在加强筋刚度相对较弱的情况下，无论是单向加筋板还是双向加筋板，其位移和速度在x和y方向的最大值远远小于z方向的最大值。

But periodic stiffened plate have no evident passing bands.

周期加筋板没有明显的穿透频段。

At the same time, different influences on node performance about different stiffened plate, beam web thickness, beam web height, concrete strength, axial compression ratio, shear span ratio are also obtained.

同时，通过建立不同的模型进行计算，分析了加劲板、型钢腹板厚度、型钢腹板高度、混凝土强度、轴压比、剪跨比等因素对节点性能的影响。

Stress intensity factor in the rivet stiffened plate with asymmetric cracks

含非对称裂纹铆接加筋壁板的应力强度因子

In this paper, the stiffened plate theory in aeronautical engineering is used to simulate the box girder with trapezoidal cross section as a stiffened plate structure consisting of stiffener bars and sheets.

本文利用航空结构力学中的加劲板理论，把梯形截面箱梁模拟为由加劲杆与系板组合而成的加劲板结构。

Numerical Research on Truncated Cone Projectile Armor-piercing for the Stiffened Plate

截锥形弹体穿甲薄板的数值计算研究

By the finite element numerical method, a deformation analysis is made for a large thin-wall box structure of stove using infrared rays hot-air. Three conditions of unstiffened plate, stiffened plate and optimal stiffened thickness are discussed.

采用有限元数值方法，对一大型薄壁箱形结构的红外线热风烘干炉进行变形分析，文中分别对无筋板、加筋板和优化板材厚度三中情况进行讨论；

geometrical non-linear dynamic analysis of stiffened plate and its implementation on microcomputer

加筋板几何非线性动力分析在微型机上的实现

stiffened steel plate are the basic structure members in ship and offshore structures.

加筋板结构是船舶与海洋结构中的基本结构构件.