strain cracking的例句大全

Cracking study on the flexible circuits under uniaxial tensile strain

轴向应变导致柔性电路的裂化研究

A Study of Cracking on the Conjugate Crowned Tooth Flank with the Theory of Maximum Tensile Strain

基于最大拉应变理论的共轭鼓形齿面裂纹研究

Concrete behavior under the biaxial state of stress is represented by a nonlinear constitutive relationship, which incorporates tensile cracking at a limit stress, tension stiffening and shear retention effects for cracked concrete, and the strain-softening phenomenon beyond the maximum compressive strength.

混凝土的非线性本构关系，则考虑受拉开裂、开裂后的拉伸加强效应和剪切折减系数以及屈服后的应变软化现象。

Along the cladding direction, plastic tension strain appears which is the main cause of cladding layer cracking.

熔覆层材料沿熔覆方向发生的塑性拉伸变形，是造成熔覆层开裂的主要原因。

It has been found out that the major culprits for the corrosion cracking are the concentration of harmful ions from caustic wash and material settlement and residue tension strain.

装置碱洗、物料沉积导致有害离子浓缩及设备存在残余拉应力是造成腐蚀开裂的主要原因。

The stress corrosion cracking ( SCC) susceptibility of 2091 Al-Li alloy was studied under tension at slow strain rate by quench aging in various media.

用慢应变速率拉伸试验研究不同冷却介质淬火并时效的2091合金的应力腐蚀敏感性.用透射电镜观察合金的微观组织.结果表明，晶界无析出带（PFZ）随淬火速度的提高而变窄；

Based on the liquid film theory of hot crack formation and results of numerical simulation of solidification and thermal strains, equivalent strain is proposed to serve as the criterion for hot cracking.

从热裂产生的液膜理论出发，根据凝固过程温度场和应力场、应变场的数值模拟结果，提出了热裂形成的等效应变判据；

the reasons for cracking were analysed by the very sharp changes of concrete elastic modulus and ultimate tensile strain at very early ages;

作者从混凝土最早期的弹性模量及极限拉应变的急剧变化分析了早期裂纹的成因；

Based on the Bernoulli's principle, stress-strain relationship of materials and the conditions of equilibrium, the formulae calculating cracking moments are derived.

根据平截面假定、材料应力应变关系和静力平衡条件导出混凝土受弯构件正截面抗裂弯矩计算公式。

the shaft must be strong enough to deliver this twisting force to a loaded axle without deforming or cracking under the strain.

桥一定够强壮来没有变形递送这个扭转的力量给一个被装载的轮轴或在紧张之下弄碎。

the shaft must be strong enough to deliver this twisting force to a loaded axle without deforming or cracking under the strain.

桥一定够强壮来没有变形递送这个扭转的力量给一个被装载的轮轴或在紧张之下弄碎。