strength pressure的例句大全

Slopes of gravitational gliding are related to rock strength, thickness of sliding system, pore fluid pressure and lubricating layer;

岩层重力滑动的坡度与岩石强度、滑动系统厚度、孔隙压力以及润滑层有关；

It appears that the strength of unsaturated soils increases with net confining pressure and suction, but the tendency to dilate diminishes with them.

进行了一系列的控制吸力的三轴试验，试验结果表明，吸力和净围压的增加使得试样的抗剪强度提高，剪胀性减小；

SCC Susceptibility Analysis of Low-alloy High-strength Steel Pressure Vessels in Wet H_2S and Nitrate Environment and Study of Safety Control Technology

湿H2S及硝酸盐环境中低合金高强度钢制压力容器应力腐蚀开裂敏感性条件分析与安全保障技术研究

As a result, recent construction of pipelines has shown a trend towards higher operation pressure with greater wall thickness and higher strength pipe.

因此，近年来高压输送和厚壁、高强度的管线已经成为管线建设的一个新的发展趋势。

the influence of acid strength of the ionic liquids, reaction temperature, reaction time, and co pressure was studied.

研究了离子液体的酸强度、反应温度、反应时间和CO压力等对反应活性的影响。

The paper adopt the hot-melt fibers ( ES fibers) which is sheath-core structure, at a certain pressure and temperature, the sheath of the fiber was melted and the fibers fused together, so that, the tensile strength of the paper is advanced.

采用皮芯结构的低熔点纤维，在一定的热压条件下，皮层纤维熔化，纤维间相互粘结，提高纸页的强度。

Influence of gas pressure on compressive strength size effect of inhomogenous coal

瓦斯压力对非均质煤岩抗压强度尺寸效应的影响

Effect of different pressure time on bond strength of glass ionomer cement

不同加压时间对玻璃离子水门汀粘接强度的影响

A Study Effects of Acid-etching Pressure on Bond Strength to Enamel

酸蚀涂布压力对牙釉质粘接强度影响的研究

Increasing the temperature of preheating, the mandrel-pressure roller and the hot air gun and choosing the moderate pressure of pressure roller come along with a rise in interlaminar shear strength ( ILSS) and a reduction in resin content.

结果表明：提高芯模压力辊温度、热风枪温度、预热器温度，选择适中的压力辊压力，在层间剪切强度提高的同时，树脂含量下降。

Introduces the main ideas of the software system that is developed from China GB9222-88 ( Strength calculation of pressure parts for water tube boiler).

介绍了根据GB922288《水管锅炉受压元件强度计算》而开发的实用软件系统的设计思想。

A statistics analysis of wind pressure was carried out to reveal the strength and dispersion of the wind force and the unfavorable wind direction was found accordingly.

通过对总受力和压力方差的统计分析，获得了不同风向下结构受风力作用的大小和离散程度，可为评估不利风向角提供重要参考依据。

By using the field function with the form of twin shear stress unified strength theory, the formulas and procedure are given to calculate the stress, strain, displacement fields and final pressure of cylindrical cavity expansion.

采用双剪统一强度理论的屈服函数形式，推导并给出了柱形孔扩张时，应力场、应变场、位移场和最终扩张压力计算时所需公式和计算求解步骤。

Response of extrusion pressure to vibration strength in plastic electromagnetism dynamic extruder

塑料电磁动态挤出机中挤出压力对振动强度的响应

Methods The transverse flection, flexural strength, elastic modulus, impact strength and surface hardness were compared respectively in using the fast automatic dental raisin hydraulic pressure and water bath-cured denture base resins.

方法采用自行研制的新型液压自控牙用树脂聚合器和常规水浴两种方法加热固化义齿基托材料，进行挠度、抗弯曲强度、弹性模量、抗冲击强度及硬度的对比分析。

By taking crafty model construction technique in cement concrete pavement of bridge, the problems of crack, lower pressure strength, being not able to endure milling, bad even level can be solved preferably.

水泥钢筋混凝土桥面铺装通过滑模摊铺技术施工，较好地解决了桥面铺装易开裂、抗压强度不高、不耐磨、平整度差等质量通病问题。

Pulse signals are found of the pressure, and the pulse strength undergoes subharmonic bifurcations controlled by the scaled vibration acceleration.

发现这种压力是脉冲式的，并表现出受振动加速度控制的倍周期分岔现象。

Strength analysis and structural optimization for large-calibred gate valve body by using AWE It is applicable to big ranges of pressure, temperature and caliber, especially to the pipeline of moderate or big caliber.

基于AWE的大口径闸阀阀体强度分析与结构优化闸阀适用的压力、度及口径范围很大，尤其适用于中、口径的管道。

The extra-high pressure working cylinder has high strength, strong bearing ability, high safety, long service life and low use cost.

本实用新型强度高，承压能力强，安全性高，使用寿命长，使用成本低。

In this paper, the tangent modulus and the tangent Poisson's ratio computed with internal friction angle under convenient pressure and with non-linear variability of strength under high pressure were compared.

文中对用低压力下内摩擦角所算得的切线模量、切线泊松比和考虑高压力下强度非线性变化计算的数值进行了比较。