stress coefficient的例句大全

Most low-priced integrated circuits are encapsulated in plastics, however, plastics are nonwatertight ( water is a formidable enemy to integrated circuit) and because hot expansion coefficient between plastics and integrated circuit material is different, which produces shortcoming of stress with integrated circuit completely.

大部分廉价的集成电路是用塑料封装的，但塑料透水（水是集成电路之大敌）且又因与集成电路材料的热膨胀系数相差较大而产生应力的缺点。

The bigger is the radius of arc bracket joints which have adding close board, the greater is its stress relief coefficient.

带封闭板的圆弧角板的圆弧半径越大，应力减小系数也越大。

As to the arc bracket joint which carries adding close board, stress relief coefficient is bigger than arc bracket joint which carries no adding close board. angle.

加了带封闭板的圆弧角板后，应力减小系数比没加封闭板时来得大。

Results The stress relaxation and reduced creep data and the curves of L5 were obtained. The reduced stress relaxation and reduced creep function and its curves were also gained, together with the regressive coefficient a, b, c and d.

结果得到了L5椎体应力松弛、蠕变数据和曲线，还得出了归一化应力松弛、归一化蠕变函数及曲线取得了回归系数a、b、c、d值。

Coupling relationship of percolation coefficient of fractured rock masses to strain and stress

节理岩体的渗透系数与应变、应力的关系

In this paper, the stress equilibrium equation and the limit coefficient mathematics function of compound liquid bulge forming tube blank are deduced. The limit coefficient of compound bulging a 0 75 ton light freight-capacity truck axle housings is calculated.

本文推导出管坯复合胀形应力平衡方程及极限成形系数的数学表达式，求解了075t轻型车后桥壳复合液压胀形极限成形系数，确定了成形力参量的匹配关系。

It is to use finite element method to calculate the stress within the slope in this paper, and get the normal stress and tangent stress of the slope sliding surface directly, and then calculate the stability coefficient of the slope.

本文研究内容是应用有限元法计算斜坡内部的应力，并直接求解边坡滑动面上的法向力和切向力，进一步计算边坡的稳定系数。

Momentum transfer coefficient plays an important role in computing conveyance capacity, mean apparent shear stress on the vertical interface between main channel and flood plain, mean boundary shear stress on flood plains or in main channel respectively.

复式河槽动量输运系数在计算复式河槽过流能力、滩槽交界面平均表观剪切应力和滩槽床面平均剪切应力等方面有着十分重要的作用。

this thesis presents "illustration method" which describes the shear lag effect of main girder with single box and triple-celled by the shear lag coefficient curve illustration and transverse distribution chart of longitudinal stress.

提出了一种用截面剪力滞系数曲线图或纵向应力沿横截面分布图来描述单箱三室（或多室）主梁剪力滞效应的图示法；

calculation of resistance coefficient of adjoining rock for pressure tunnels considering effect of intermediate principal stress

考虑中间主应力影响的压力隧洞围岩抗力系数通用计算式

and the result agrees well with that of egd-3 using the stress concentration coefficient on the basis of fem under the low cycle load.

在高低周载荷下，使用有限元法计算应力集中系数的EGD-3方法计算的主轴疲劳寿命更符合实验结果。

testing of glass; tensile test for the determination of stress optical coefficient

玻璃的检验.拉伸试验中光弹系数的测定

glass; determination of stress-optical coefficient; part 1: tensile test

玻璃.光学应力系数的测定.第1部分：抗拉试验

glass; determination of stress-optical coefficient; part 2: bending test

玻璃.光学应力系数的测定.第2部分：弯曲试验

modified goodmen stress diagram for sucker rods and allowable safety coefficient

修正的古德曼应力图及许用安全系数

the authors apply strength reserve coefficient method and apdl technique to analyze the stress stability of csg in static state.

应用强度储备系数法和APDL技术，对静力状态下的CSG坝的应力稳定进行分析。

Furthermore, calculations of stress concentration coefficient for both eccentric and concentric reducers are completed.

还对相同直径比的偏心及同心异径管的小端应力集中系数进行了计算.

The results showed that extensive dezincification occurred in all the tests but potential had opposite effects on the dezincification coefficient and susceptibility to stress corrosion cracking; an increase in potential accelerated crack velocity but depressed the dezincification coefficient.

结果表明，所有试验都发生严重脱锌，但是，电位对脱锌系数和应力腐蚀开裂敏感性的作用影响相反：提高电位加速裂纹扩展，却降低了脱锌系数。

The amplitude of crack-tip stress field decreases when the coefficient of hardening becomes bigger, and increases when viscosity increases.

裂尖场应力和塑性应变幅值随材料硬化增强而减小，随粘性增强而增大。

The Study of Stress Concentration Coefficient of Cruciform joint Based on ANSYS

基于ANSYS的十字接头焊应力集中系数研究