stress element的例句大全

Using the well-known weighted residual method and finite element procedure, a nonlinear static analysis parallel with effective stress dynamic analysis has been made.

采用著名的加权剩余值法和等参数有限单元法，对坝体进行非线性静力分析和非线性有效应力动力分析。

A Preliminary Study on the Adaptive Finite Element Analysis of Stress Singularity Problems

应力奇异问题自适应有限元分析初探

The finite-element design method for low stress numerical simulation was introduced to analyze the working stress of vehicle wheels.

使用低应力有限元数值模拟的设计方法，分析了车轮工作时的应力。

By using finite element method, the equivalent stress and contact stress in the danger zone under different hollow sizes are calculated.

采用有限元分析方法，对不同空心度下的滚柱轮最危险区域的等效应力和接触应力进行了详细计算。

Stress Analyses of Double Lap Joint by Boundary Element Method

双搭接接头应力场的边界元分析

The BEM technique for adhesive-bonded structure proves valid by comparing the stress distribution for double lap joint calculated in this paper with that calculated by finite element method.

对双搭接接头进行了边界元应力分析，并和有限元结果进行了对比，从而证实本文方法的有效性。

Constant load tensile test was adopted to study the influence of welding material match and alloy element content on SSCC ( sulfide stress corrosion cracking) of domestic pipeline steels.

采用恒载荷拉伸法，测试了国产管线钢母材及其焊接接头的硫化物应力腐蚀开裂SSCC性能。结果表明：焊接匹配、合金元素是影响国产管线钢SSCC的重要因素。

Stress analyses of eccentric and concentric reducers by tridimensional finite element method

偏心及同心异径管的三维有限元应力分析

Analysis on Finite Element of Instep Stress Distribution at Heel Raising

提踵状态下足纵弓应力分布有限元分析

This paper analyzes the stress of holes in web plates of box beam by Finite Element Method, and shows laws of effects of the shape, size and position of the holes in the web plate on box beam's strength.

用有限元方法对箱形梁筋板上孔的应力进行了分析，给出了筋板上孔的形状、大小、方向以及排列方式对箱形梁强度的影响规律。

With optimization of pull cables and element sections as design variables, an optimization model and design approach for pre-stress space tress structures were obtained.

文中以拉索张力和杆件截面为设计变量，提出了预应力网架结构的优化模型，并给出了具体的优化设计步骤。

In this paper, the ASYM program of axisymmetrical element method are used to calculate and compare with the stress distribution and displacement of the two types of centrifugal drum.

采用轴对称有限元ASYM程序，对两种机型的转鼓，在操作条件下的应力分布状态和位移进行计算与比较。

Objective To study artificial lumbar intervertebral disc three-dimensional finite element model and its stress state.

目的研究人工腰椎间盘三维有限元模型的建立及其应力分布。

Finite element analysis of microscopic stress state of a plain weave glassfiber composite

纤维织物增强复合材料微观应力场的有限元分析

Then, contact stress and deformation of a half sphere micro-convex was simulated and calculated by using finite element analysis software ( ANSYS), and the testing model of pin-on-disc sliding wear was proofed through test data.

采用有限元分析软件ANSYS对半球形微凸体接触应力和变形进行了仿真计算，并用销盘滑动磨损试验数据给予验证，证明了所建立的仿真模型是可行的。

First step to finite element modeling and then analyze the yield strength and buckling stress.

在疲劳校核计算之前，先建立有限元模型，分析其屈服、屈曲强度。

Three Dimensional Finite Element Stress Analysis as ⅰ-bar Clasp

Ⅰ形杆卡应力分布的三维有限元法分析

The stress-strain state for notched specimens subjected to constant amplitude proportional multiaxial loadings was also calculated and analyzed by the finite element model and the theoretical stress concentration factor of the notched specimens had obtained.

针对多轴比例加载的情况，利用弹塑性有限元法对缺口件在拉&扭复杂加载下的应力应变场进行了计算和分析，得到了缺口件的应力集中系数。

Finite element analysis of electric field in cable termination equipped with nonlinear stress control tube

含有非线性应力管的电缆终端电场的有限元分析

Study on arch dam strength design criteria based on finite element equivalent stress analysis

基于有限元等效应力法的拱坝强度设计准则探讨