stress zone的例句大全

The main tension zone and law of stress distribution are investigated regarding the relative width of diagonal tension stress zone as variable.

以坝踵主拉应力区相对宽度为变量，探讨了重力坝坝踵主拉应力区的范围和应力分布规律。

on the process of tunnel excavation in high geo-stress zone, surrounding rocks will have dynamic drift.

高 地应力 下的隧洞开挖过程中, 围岩将产生动态的变化.

The change rule of effectiveness of different force value of protraction in the same direction differs in different stress zone. 6.

相同方向不同力值的牵引力在不同大小区间，其效应的变化规律不同。

Through actual excavation monitoring, it has presented some experience and reference for excavation design of arch dam foundation in high terrestrial stress zone.

为高地应力区的拱坝坝基开挖设计提供了可以借鉴的经验。

The floor roadway should be located out of the abutment stress zone when protection coal pillar is retained, or the working face should be pushed away for enough distance under overhead mining.

留设保护煤柱时，底板岩巷应位于集中应力区的外侧或跨采时工作面应推过足够距离，使巷道靠近采空区应力恢复区的下方。

Theoretical solution of boundary curve of the tension stress zone for Long Rectangle Platen upsetting

矩形长板镦粗拉应力区界定曲线的理论解

Osteoblasts and osteoclasts: Two groups showed clear signs of stress and tension zone area.

成骨细胞破骨细胞数两组均呈现明显的压力区和张力区。

Along the longitude of the tensile specimen, the integration of the decrease in Mises equivalent stress in the softest zone is equal to that of the increase in its adjacent zones.

最软区Mises等效应力的降低量和与之相邻区域的增加量在试样长度上的积分相等。

At the same time, the depth of die heat affected zone ( HAZ) transfer law and influential mechanism of temperature wave have been analyzed, which lay a foundation for further research of temperature field and thermal stress filed of die. calculation of casing thermal stress;

同时分析了温度波在模具中的传递规律，热影响区范围与影响机理，为进一步开展锻模温度场与热应力场的研究提供了基础。

The stress testing and safety assessment for an enamel vessel in thermal deformation zone

搪瓷容器热变形区应力测试与安全评定

At the same time the paper establishes the solid finite element model of T-beam, and analyses the fatigue cracks, and the time-stress history of the reinforcement in tensile region and of the concrete in compressive zone under automobile load spectrum.

同时建立了T型梁有限元实体模型，分析了车辆荷载谱作用下梁的疲劳开裂、压区混凝土以及拉区钢筋的应力时间历程等问题。

It is pointed out in the existing literatures that residual stress is linear distribution that is disadvantageous to stability of structure, because it can clearly reduce effective thickness of slab in bended zone under outer load.

这种纵向残余应力分布不同于现有文献提出的线性分布，对结构稳定性较为不利，使弯曲区的板在外荷载作用下的有效厚度明显地减小。

According to the fatigue environment in the ice zone and the ice-force spectrum function, this paper establishes the approximate explicit formula of nodes stress with respect to the ice velocity and thickness.

本文结合现有的冰疲劳环境荷载及冰力谱函数，提出了相对于冰速、冰厚随机冰载的管节点应力幅显式近似计算公式；

Under the combined action of the drill pressure and torque, the distribution of the compressive stress on the journal and thrust surface is asymmetric, and the contact zone is offset.

在钻压加扭矩共同作用下，牙爪轴颈和止推面上的压应力分布不对称，接触区域发生偏移，止推面上接触区偏移较多。

Then the hazard zone of tire/ rim contact area with axial force of cord, Mises stress, shearing strain and strain energy potential were analyzed.

同时运用帘线轴力、Mises应力、剪切应变、应变比能4个力学量对胎圈部的危险区域进行了精细分析。

According to the deformation of shear spinning on conical workpieces, the stress and strain has been analyzed and the new deformation mechanism has been put forward that the forming area of shear spinning should be divided into tension bending zone and rolling zone.

根据剪旋过程的实际情况进行了应力应变分析，对剪旋变形机理提出了新的见解，将剪旋变形区分为拉弯区和辗压变形区。

Effect of Triaxial Stress on the Plastic Zone Distribution in Front of Crack Tip with Mixed Mode Loading

三轴应力状态下复合型裂纹尖端前缘的塑性区分布

In this paper, Ansys finite element software is used to analyze the insulation of thermal bridge in steel structure housing in Hot Summer and Cold Winter Zone, analysis of thermal stress in masonry-infilled steel frames is also involved.

本文主要利用Ansys有限元软件，针对夏热冬冷地区钢结构住宅梁柱热桥节能问题和钢框架-轻质砌体温度应力问题进行了分析。

The distributions of temperature, stress, strain, strain rate, displacement and viscous damping coefficient within ductile shear zone at different time intervals are distinguished in the cases of accelerating creep age and strain softening.

并对加速蠕变和应变软化两种情况，给出了不同时刻韧性剪切带内的温度、应力、应变、应变率、位移和粘滞系数的分布特征，描述了岩石递进变形的规律。

The modified layer which consists of a molten zone and a heat-affect and quasistatic thermal stress-affected zone exhibited good wear resistance.

由熔化区、热影响和准静态热应力影响重叠区和过渡区组成，改性层表现出良好的耐磨性；