surface conductivity的例句大全

The surface conductivity and volume conductivity of nanocomposites are2~ 4 orders higher than that of pure epoxy resin respectively.

电学性能测试表明当金云母含量为1wt%时，复合材料体积电导率和表面电导率分别比纯树脂提高了2个数量级和4个数量级。

Surface conductivity is usually independent of back pressure and screw speed.

表面导电性通常不受背压和螺杆转速影响.

A Temperature-Humidity Mathematical Model and Acceleration Factors for SiO_2 Surface Conductivity

SiO2表面电导率的温度、湿度数学模型及其加速因子

surface conductivity and surface tension methods were used to study the interaction of the cationic dye with the p ( st-co-aa) microspheres.

采用表面电导率法、表面张力法研究了阳离子染料与P（St-co-AA）微球分散液的相互作用。

The properties of phosphorylated and cross-linked EVOH/ DGEBA membranes including thermal stability, oxidation stability, surface morphology, water uptake, dimensional stability, state of water and conductivity were systematically investigated.

系统表征了磷酸化交联EVOH/DGEBA膜的热性能、氧化稳定性、表面形貌、吸水率、尺寸稳定性、膜中水的状态和电导率。

Based on the previous work, surface tension, thermal conductivity and viscosity are investigated in the relationship of temperature and pressure.

分别考察了表面张力、热导率和粘度与温度和压力关系。

The research purpose of this paper is improvement copper-based powder metallurgical pantograph sliding plate deliver the performances such as density, electrical conductivity and surface hardness, and eventually improve its abrasiveness can.

本论文的研究目的是改善铜基粉末冶金受电弓滑板的致密度、电导率、表面硬度等性能，并最终改善它的磨损性能。

the common methods for fast evaluating al-si alloy modification in front of the furnace have been introduced and reviewed, including fracture surface examination, bending angle measurement, melt surface riffle, thermal analysis and electrical conductivity.

本文回顾了Al-Si合金变质处理效果常用炉前快速检测方法的研究与应用状况，主要包括断口观察法、折弯测角法、液面观察法、热分析法、电导率法等。

Based on effective medium approximation and fractal theory for describing nanoparticle clusters, a model for predicting effective thermal conductivity of "nanofluid" is established considering particle size effect and particle surface adsorption.

运用有效介质近似与分形理论描述纳米颗粒团聚体空间分布，同时考虑颗粒尺寸效应及表面吸附作用，建立起纳米颗粒悬浮液有效导热系数预示模型，结果与实测数据相符。

This thesis proposes a method based on the temperature distribution model of inner surface and central axis of the blast furnace, adopts the approximate solution for the thermal conductivity of the solid cylinder containing internal heat source, then obtains blast furnace radial one-dimensional temperature distribution.

根据已获得的高炉内表面和高炉中心轴线温度分布，采用含内热源实心圆柱体的导热近似求解方法，求出高炉径向一维温度分布，从而得到高炉内部整体的三维温度分布模型。

The technique features especially high conductivity and free of burrs on the strip surface.

尤其是产品电导率高、表面无毛刺。

PH and electrical conductivity in surface snow show obvious seasonal variations, which to some extent are associated with the dominant NE and ENE valley wind.

结果表明，表层雪的pH值和电导率具有明显的季节变化趋势，与本区域的主导山谷风风向NE和ENE密切相关。

Mutual Coupling of Slotted Waveguide on a Circular Cylindrical Conductivity and Excitation of Surface Wave Plasma Column

圆柱共形面上波导口辐射元间的互耦研究

The use of die-cast aluminum with high thermal conductivity material, the surface of gray paint, the appearance of fine high-end.

采用导热性高的压铸铝材质，表面灰色烤漆，外观高档精美。

By adding the carbon black treated by surface modifier with functional group, the conductive composites with high electrical conductivity and excellent comprehensive properties could be obtained with low carbon black content.

用带功能基团的表面改性剂对炭黑进行表面处理，在炭黑低填充量下即获得了导电率高、综合性能优良的导电复合材料。

semi-empirical analysis of the conductivity field in the wake of a surface ship in a salinity-stratified fluid

盐度分层环境中水面舰船尾流电导率场的半经验分析

the metallized films with excellent surface reflectivity and conductivity can be fabricated in that method with its outstanding metal-polymer adhesion obtained and the essential mechanical and thermal properties of the parent polyimide films retained.

采用该法可制得具有较高的表面反射率和电导率，优异的界面粘结性，并保持母体PI大部分优异性能的复合薄膜；

Many plastics have high surface resistance and low electrical conductivity.

很多塑料具有高的表面电阻和低的导电性能.

The Effect of Measured Surface on the Eddy Conductivity Testing Value for Wrought Al-Alloy

检测面对变形铝合金电导率涡流测试值的影响

The methods of short network layout, direct welding or both compression joint and welding between connections are concluded according to long trem practices to reduce electric resistance in contact surface, increase integral electrical conductivity of the short network and power factor of the furnace.

长期生产实践总结出矿热炉短网布置与各个联结部位采用直接焊接或压接加焊接，软母线整体浇注等方法，可降低接触面的电阻，提高短网整体导电性能与电炉功率因数。