surface contact的例句大全

The micro mechanical properties were analyzed by nano-indentation technique. The surface contact stress of the repaired teeth in the steel-steel spur gear transmission and steel worm against copper wormgear transmission were calculated and analyzed.

用纳米压痕法研究了各修复涂层的弹性模量等微观力学性能，由此分析计算了钢-钢直齿圆柱齿轮传动和钢蜗杆与铜蜗轮传动修复齿面的接触应力。

acidic water bucket solution and a printing plate cylinder surface contact, resulting in a printing plate surface corrosion rust.

碱性水斗溶液与印版滚筒暗地隔绝，变成印版滚筒暗地腐化生锈。

Tapered bores for keyed hubs shall have a minimum of70% transfer of bluing ( surface contact) to the taper gage.

键槽轮毂的锥孔应至少有70%的着色（表面接触）转移到锥度计上？

The Effect of Surface Contact Conductance on The Strip Exit Temperature

界面接触热导对铸坯出口温度的影响

The modified illite was evaluated by some measures such as surface contact angle method, infra-red spectrum method, which all indicated that the illite had been modified effectively.

经表面接触角、红外光谱等方法预先评价得知，伊利石的确得到改性。

acidic water bucket solution and a printing plate cylinder surface contact, resulting in a printing plate surface corrosion rust.

碱性水斗溶液与印版滚筒暗地隔绝，变成印版滚筒暗地腐化生锈。

Mises stress in surface contact center of coating system is not equal to zero, which is different without coating.

与无涂层的情况不同，涂层体系表面接触中心处的Mises应力不为零；

The contact element method and original stress method were used to analyze the elastic plastic contact problem of wheel/ rail with measured surface micro roughness. The distribution of surface contact pressure on the rail was obtained.

采用接触单元方法，结合初应力法，采用测量获得的表面微观粗糙度，对轮轨弹塑性接触问题进行了研究，获得了轮轨的表面接触压力分布等结果。

it is found that the superposition of surface echo on the defect echo during the sampling process, which is caused by the special structure of arc surface contact, results in the non-uniform background in c-scan image. that is the key reason influencing the c-scan image quality.

通过分析发现，由于弧形触点特殊结构的影响，在对缺陷回波采样过程中叠加的表面回波分量在C扫描图像中形成了不均匀分布的图像背景，这是影响C扫描图像质量的主要原因。

In the process of synchronizing the die-cutting , die-cutting edge full length and die-cutting material surface contact.

在同步 模切 工艺中, 模切 刀刃的完整长度与 模切 材料的表面接触.

Some performance indexes such as surface contact angle, molecular weight, crosslinkage, tensile strength and break elongation etc. were investigated.

对EB辐照薄膜的某些性能指标，如表面接触角、分子量、交联度及拉伸强度、断裂伸长率等进行了测试。

Through measures such as surface contact angle method and infra-red spectrum, the effects of particle size, particle surface activity, particle shape, etc were studied.

通过对改性产品接触角测量和红外光谱分析，探讨了颗粒粒度、表面性质、晶体结构对填充橡胶性能的影响。

The results show that metal surface contact resistance decreases with the increment of pressure.

研究表明:材料的表面接触电阻是压强的函数.

check for surface contact area ( metallic contact ) between stern shaft and propeller hub tapers.

检查螺旋桨轴与螺旋桨锥度接触面.

Sleeve joint secures more than a pin joint, it's surface contact with the rim's inner wall is increased yet we're able to maintain it's lightweight properties.

袖套连接比销钉连接更加安全，可靠。这种表面与轮圈内部墙的接触更加增加了我们能维持它的轻量的特性。

Surface contact and tight fit of supporter were calculated by traditionally mechanic theory.

按按传统力学理论对托轮的表面接触应力和过盈配合进行了计算；

Simulate the water film formation conditions at the time of tillage parts touching soil, tested the optimal combination of etching Plowshare Steel surface contact angle.

模拟耕作时触土部件形成的水膜条件，测试了刻蚀的最优组合的犁铧钢表面的接触角。

with the increase of graft yields gradually, the surface contact angle of fabrics increased correspondingly and showed the trend of a gradual slowdown. when the grafting yield reached a certain value, if it is further increased, the contact angle will decrease.

随着单体接枝率的逐渐升高，织物表面接触角逐渐增大，但趋势逐渐放缓，当接枝率过高时，反而会使接触角下降。

Monofilament contact angle meter has been used to measure the critical surface tension of glass fiber treated by different coupling agents.

本文应用单丝接触角测定仪测定了不同偶联剂处理的玻璃纤维临界表面张力。

The contact angles of the F-DLC films deposited on glass substrates with water, the bond structure and the roughness of the films were investigated by surface tension measure apparatus, FTIR, and atomic force microscopy, respectively.

接触角测量仪测量了沉积在玻璃基底上的F-DLC薄膜的接触角，采用傅里叶红外分析了薄膜价键结构，原子力显微镜分析了薄膜表面粗糙度；