surface cut的例句大全

one hardness test shall be performed on each wetted surface cut with oxy-fuel or arc-air which is left unwelded on the finished part.

用含氧燃料或电弧气切削加工表面上的未焊接的湿表面，应作硬度试验。

ganymede, the largest moon in the solar system, has a dirty ice surface cut by fractures and peppered by impact craters.

这颗太阳系中最大的卫星，表面冰盖布满断层的切口和火山灰的粉末。

Great care must be taken not to cut into or scratch the surface of the finished stone.

必须非常小心避免切到或刮伤宝石成品的表面。

Curiosity will be lowered on the Martian surface on cables and cut loss. Then the rocket pack will blast off. Curiosity is the size of a small car and has seventeen cameras. It's much larger than previous rovers and can travel as far as 200 meters per day.

“好奇者号”大小相当于一辆小型轿车，带有17个摄像机，“好奇者号”比之前发射的侦察器都要大得多，每天的移动距离能达到200米。

Comparing with oxygen, nitrogen produced brighter and smoother cut surface with smaller kerf.

相比氧气，氮气作为辅助气体时，可获得更窄的切缝以及更光滑的缝面；

Working Surface in a sample room should be sturdy and smooth and long enough to allow a full-length dress to be cut.

样板间里的工作台板应是坚固的、光滑的，而且它的长度足够裁剪一条特长的连衣裙。

Determination of slope cut-induced influence zone and potential slide surface is an important problem for geotechnical field.

边坡开挖影响范围和潜在滑面的确定是工程界一直关注的重要课题。

In the tests select the plowshare iron ( hydrophilic material) as a pilot test material, use machine tools to cut and polish the surface of plowshare iron in order to increase the reliability and comparability of tests.

犁铧钢是农机具耕作部件的主要材料，选择犁铧钢（亲水性材料）作为试验试材，运用机床对犁铧钢切割和表面磨光，增加了试验可靠性和对比性。

Investigation on the Procedure of Pipe Laser Cutting and the Model of Generation of Striation on Cut Surface

管材激光切割过程和条纹形成模型的研究

The cause analyses and model study of striation on cut surface generated by abrasive jet

磨料射流切割表面波纹的成因分析及其建模研究

The Necessity of Level Type Case Body Part Thick Basic Surface Preparatory Cut Is Studied

平面型箱体零件粗基准表面预加工的必要性研究

The process parameters, including depth of cut ( ap), feed rate ( vf) and circular linear speed of the sawblade ( v,), varied over a relatively wide range during the experiments, while the segment surface being kept at a relatively stable state.

实验过程中在保持金刚石节块表面状态基本不变的情况下，对锯切深度ap、叫进给速度Vf和锯片圆周线速度Vs进行了较大范围的变化。

The key factors and their interactions were also discussed through the response surface and contours of the impact of fresh-cut water chestnuts.

同时利用模型的响应面对影响鲜切荸荠品质的关键因子及其相互作用进行了探讨。

There's a whole undiscovered world down there, a lightless place cut off from the surface for centuries, perhaps millennia.

地下还有一整个没被发现的世界，一个远离地表几年百年甚至上千年的黑暗世界。

Fuzzy yield functions corresponding to he cut& set of fuzzy sets are introduced for the obviousness of fuzzy yield surface, and the membership function is ingeniously related with yield function.

为使模糊屈服面明朗化，文中引入了与模糊集截集相应的模糊屈服函数族。并巧妙地将隶属函数和屈服函数联系起来。

The key to the cutting method on a slope with a fixed slide surface is where to cut in order to obtain the minimum earthwork and make the slope reach an anticipated stability.

对滑裂面固定的边坡进行削坡时，关键在于何处削坡使得土方量最小且边坡具有预期的稳定程度。

The Reflection Characteristics of Surface Transverse Wave under Metal Strips on ST34 ° Cut Quartz

ST34°切割石英上表面横波的金属栅阵反射特性

Spiral bevel gears carbide skiving cutter has designed by method of inclination cut and straight line profile, and the generating surface of cutter is hyperbolic but conic.

根据斜角直线齿形造形方法设计出的弧齿锥齿轮刮削刀盘产形面已不再是一个圆锥面，而是一个双曲面。

Lay the pineapple on a flat surface, cut off the top, slice off the bottom, cut off the sides.

将菠萝放在一个平整的表面，切掉顶部和底部，削掉表皮。

Analysis of the side-wall pattern shows that the side-cutting process of the roller bit is related to not only the teeth surface design but also the rock property and the drilling parameters.

井壁模式分析说明，牙轮钻头的侧向切削过程不仅与齿面结构有关，而且与岩石性质、钻井参数有关。