surface element的例句大全

Application Research of Thulium Element in Iron and Steel Smelting and Die& Mold Surface Strengthening

稀土元素在钢铁冶炼和模具表面强化中的应用研究

This paper analyses that grinding of sample influence testing result of main element in copper alloy from three respect, emery cloth, grinding method, surface condition of sample.

本文从砂带，研磨方法，试样表面状况三个方面，分析了试样研磨对铜合金主要元素测试结果的影响。

The reflection phase property and surface wave dispersion are analyzed using finite element method.

用有限元方法分析了其反射相位特性及表面波传输特性。

Testing large curvature surface of optical element with spatial carrier heterodyne interferometry

大曲率光学零件面形的空间载频外差干涉术检测

The nitride layer was formed on the surface of ductile cast iron by gas multi-element penetration, and the phase structure and section appearance of nitride layer were analyzed by the XRD and SEM.

球墨铸铁经过气体多元共渗后可在其表面形成氮化层，通过X射线衍射和扫描电镜对渗层的相结构与形貌进行分析。

The surface energy of the interface layer is one important influencing element of capillary force.

中间层液体的表面能是影响弯月面力作用强度的重要因素之一。

When calculating the wattage capabilities of a Element, the unit of watts output per unit of radiating surface area is used.

当计算其能量时，要用到每单元辐射面积的输出功率。

Using the light intensity of the surface of object and the rendering models of primary elements to render the every primary element so as to obtain the 3D geometry texture;

在绘制阶段，利用所获得的光照信息和画元的绘制模式在各分点处绘制画元，以获得符合物体表面总体明暗调子的几何纹理；

By applying The Law of Conservation of Energy and the theory of complex beam parameters of laser beams, the complex matrix element of optical surface of shaping optical system can be obtained.

运用能量守恒，以及光束复参数理论，获得描述用于整形的光学系统的光学复数矩阵元。

The soil is in a large part impacted by the coal gangue pile deposited on the surface, and the major polluting element is Cd.

土壤主要受到附近地表堆放的矸石堆影响，主要污染元素为Cd。

SiC/ SiO_2 multilayer can be obtained on the surface of fuel element matrix graphite of high temperature gas-cooled reactor by the combination of vapor reaction diffusion, slurry method and high temperature oxidation in air;

将气相反应扩散法、泥浆浸渗法和高温氧化法结合起来，在高温气冷堆燃料元件基体石墨表面制备出SiC/SiO2复合涂层；

The finite element model after meshing into FLUENT software, the model established numerical analysis, capacity analysis and lubrication properties, while the lubricating properties of sine wave contrast slope tile bearing surface of the bearing.

将网格划分后的有限元模型导入到FLUENT软件中，对所建立的模型进行数值分析，进行承载力和润滑特性的分析，同时对比斜面轴承的波形波形曲面瓦轴承的润滑特性。

In view of the line and surface tactility displayed by the pneumatic nozzle array, a fluid-structure coupled finite element model of the finger skin and nozzle was established.

针对气动喷嘴阵列喷气再现线面触觉问题，建立手指皮肤和喷嘴的流固耦合有限元模型。

Transforming Three Dimensional Magnetic Data on an Arbitrary Surface into a Plane and Boundary Correction With Boundary Element Method Torus Quadrangular BEM of Ring Electrodes in 3-D Electrostatic Fields

边界单元法三维磁场曲化平及边界改正圆环电极电场的曲面四边形边界元算法

Then, from the account of the form element of surface layer set up the date-base.

然后通过统计表层的形态要素，建立表层的数据库；

Under the condition of the axle surface crack damages, use the finite element method, create a crack model abstracts from the actual damage surface, and study axle performance with crack damage through the following work: 1.

本论文以转K6转向架中的轮对为研究对象，在车轴产生表面裂纹损伤的情况下，应用有限元手段，从实际损伤表面抽象出一种裂纹模型，进行车轴裂纹损伤性能的研究。

The results show that the WC particles partially dissolve in the liquid of steel, and the C and W contents substantially increase in the matrix close to the bonding surface, indicating that the alloy element diffusion and transformation occur.

结果表明：WC颗粒溶解于高温钢液，微区内W、C元素的含量显著提高，存在合金元素的相互扩散和迁移；

This paper also analysis the EMC of the element in PCB. For the surface acoustic wave filter offered from certain academe, material analyse and account have adopted in the finding route of coupling and the measure of anti-jamming.

论文分析了PCB上器件的电磁兼容，对具体的某研究所提供的声表面波滤波器，在找出干扰途径以及采取对应措施过程中进行了具体分析计算。

To improve the precision of one-step forming simulation and avoid shearing closedown of unit, the currently used method was improved by proposing the model of surface spreading four-node isoparametric membrane element and adopting partial reducing integral technology.

为了进一步提高一步成形模拟的计算精度和避免单元的剪切闭锁，提出改进型曲面展开四节点等参膜单元模型，即在单元内力计算中采用了局部减缩积分技术，对现有算法进行了改进。

This method makes a dipping tendency plane fit with surface terrain in each grid element, resulting in better fitting.

由于此法在每个网格内采用趋势斜平面去拟合地表地形，因而提高了与实际地形的拟合程度；