surface force的例句大全

When the tip surface energy was kept unchanged, the minute change in the surface energy of the GeSb_2Te_4 film would cause a significant change in the adhesive force.

当针尖表面能一定时，粘附力的微小变化可以导致GeSb2Te4薄膜的表面能产生较明显变化；

Investigation of loaded crack tip on mica surface by atomic force microscopy

云母表面加载裂纹尖端的AFM研究

When the operating force of interaction between AFM tip and the surface of liposome are beyond critical values, the liposomes rupture into bilayers.

当AFM的探针与脂质体表面相互作用力超过某临界值时，脂质体胞囊破裂，变成脂双层结构。

In the measurement process the AFM feedback controller make the scanner move the sample along z-axis and keep the vdW force between the tip and sample surface constant.

在测量过程中，AFM反馈控制器控制扫描器沿z轴移动样本，保持针尖-样本表面间的vdW力恒定。

Mechanical model for atomic force microscopy tip sliding on the surface of sample

原子力显微镜针尖在试样表面滑动的力学模型

But the low thermal conductivity, anisotropy and laminated structural lead to the high cutting force, tool wear seriously and bad machined surface quality when form milling the CFRP. This makes CFRP cannot be spread in the world.

但是，CFRP的导热性差、各向异性及层合结构等特点导致其在成形齿槽铣削的过程中容易出现铣削力过大、刀具磨损严重和加工质量难以保证等缺点，严重影响其推广应用。

Thermal Drive, which can appear in miscellaneous force fields, for instance, centrifugal forces and surface tensions as well as the gravitational field.

热驱动。不仅在重力场中，而且在如离心力场、表面张力场和电磁力场中也存在着热驱动流。

The thermal driving force in normal surface form

法向表面力形式的热驱动力

Present paper analyses the thermal driving force in normal surface form and studies the factors which affect the so called thermal driving flow.

本文对热驱动力的法向表面力形式及其在流动中起作用的条件作了分析，对这种热驱动流问题作了界定。

Further, we conclude that ultrasonic wave generated in the material is the mutual result of surface thermal source and body thermal source, namely the mutual result of surface thermal dipole and normal force.

进而认为材料中产生的超声波是表面热源和体热源共同作用的结果，即是表面正交力偶和垂直力共同作用的结果。

Rolling experiments were carried out based on the analysis of rolling force and power in a three-roll planetary mill. The result shows that dimensions, surface quality and tolerances of piPes rolled with the mill can all meet the specified requirements.

在理论分析三辊行星轧制的轧制力和轧制功率的基础上，进行了轧制试验，结果表明，采用三辊行星轧机轧管，无论是尺寸范围，还是表面质量、公差均能达到预期目的。

This paper investigates forces applied on port plate surface of point contact axial piston motor, and introduces a solution of the problem of additional tilting moment of the cylinder body caused by applied force not on supporting point.

本文通过研究点接触式轴向柱塞马达配流面的受力情况，介绍了运用静压平衡理论设计平衡油室的办法，解决缸体上存在的由于作用不在支承点上所造成的附加倾复力矩的问题。

Low reaction force, less surface pressure, reasonable energy absorption.

反力低，面压小，吸能量合理。

Cylindrical type rubber fender has low reaction force, little surface pressure, reasonable energy absorb.

圆筒型橡胶护舷反力低，面压适中，吸能量合理。

Through analyzing effect of friction of tooth surface on reactive force of gear support abutment, this article shows that friction of tooth surface is a factor that causes forced vibration of gear support abutment, which is not ignored.

分析了齿面摩擦力对齿轮支座反力的影响。表明齿面摩擦力是影响齿轮支座强迫振动不容忽视的一个因素。

For the vector of centrifugal force change continually in spherical surface spin coating compared to plane, and the characteristic of spherical surface, the spherical surface movement equation was given out based on the plane.

与平面涂胶相比，球面涂胶离心力及重力分量是在不断的变化。根据平面旋涂运动方程及球面面形特征，给出了球面旋涂运动方程；

Such surface structure gives bamboo shell fiber a certain degree of cohesive force which means spinnability.

这种表面结构使得笋壳纤维具有一定的抱和力，有一定的可纺性能。

According to the shock characteristics between composite ultrasonic linear vibrator and guide slide surface, this paper proposed an impulse analysis model for calculating the friction drive force and friction transfer efficiency of ultrasonic motor.

针对复合材料超声直线电机振动体与导轨表面间存在冲击作用的特点，提出一种冲量分析模型计算电机的摩擦驱动力和摩擦转换效率。

In this paper the upper bound theorem of plasticity theory is used, and the stability analysis under the earthquake force for the slope of the slide surface of logarithmic spiral in theory is proposed.

本文利用塑性理论上限解，从理论上对地震力作用下的对数螺旋线滑动面的土坡进行了稳定性分析。

Slide-resistant pile program has realized these fuctions which are given slip surface count internal friction angle, given the shape of sliding surface design calculation, given the landslide thrust design calculation of landslide, given sliding surface moment, shear force design calculation. 5.

抗滑桩程序设计，实现了对给定滑动面形状反算内摩擦角、给定滑动面形状进行设计计算、给定滑坡推力进行设计计算以及给定滑动面处弯矩、剪力进行设计计算的功能。