surface grinding的例句大全

As the first step of ceramics machining process, the finished surface quality of slot grinding makes great effect to the machining efficiency and cost of the follow-up process.

而切割加工作为先进陶瓷制品加工流程中的第一道工序，其加工质量对后面的磨削、研磨及抛光的效率和成本有着很大的影响。

New NC Grinding Technology for Space Surface

空间曲面数控磨削新工艺

Study on Low Surface Roughness Grinding of Silicon Nitride Ceramic Glutting

氮化硅陶瓷镶块低粗糙度磨削的研究

Thus the model of PCD cutting tool metal was established, and aluminum alloy cutting experiment was done to study the influence of grinding quality on machining surface and cutting tool's life.

本文针对上述现象，建立了PCD刀具加工有色金属的切削模型，并进行了具体的铝合金切削试验，分析了刃磨质量对加工表面质量及刀具寿命的影响。

Effects of Cross Feed on Surface Roughness of Ground Workpiece in External Grinding

外圆切入磨削径向进给量对表面粗糙度的影响

Study on Grinding Temperature and Surface Burn out in High Efficiency Deep Grinding

高效深磨中磨削温度和表面烧伤研究

The grinding test of gear shaft is done for the sake of doing research on the main factors of surface roughness in grinding quenching stainless steel.

为研究淬硬合金不锈钢材料磨削加工表面粗糙度的主要影响因素，在齿轮泵齿轮轴上进行了磨削试验。

Material removal mechanism and the effect of grinding parameters on coating surface finish were discussed.

并探讨了涂层在磨削过程中的材料去除机理及磨削工艺参数的变化对涂层表面光洁度的影响。

Meanwhile the surface finish was improved by30~ 40% compared with traditional grinding method.

与普通磨削的对比试验表明，表面粗糙度降低约30~40%。

To acquire super surface finish, Al2O3 fibre grinding wheel has been developed.

为了获得高精度加工表面，最近磨具市场上有一种Al2O3纤维砂轮问世。

A new method of establishing general geometric model of spiral surfaces of flute of a special revolving tool is presented in terms of the characteristic of NC grinding spiral surface of flute.

针对数控磨削螺旋槽的特点，提出了基于一般特种回转面刀具刀刃曲线和刀面截形的螺旋槽通用几何模型。

Influence of balance precision of grinding wheel on roughness of workpiece surface

砂轮平衡精度对工件表面粗糙度影响的研究

The peak temperature and distribution of surface temperature in belt grinding were experimentally studied, and a calculating method of peak surface temperature is proposed.

对砂带磨削时表面层温度分布及工件表面最高温度进行了试验研究。

A study of cleaning the surface oxide on pressure vessels using jet stream with grinding materials

磨料射流清除压力容器氧化皮的研究

A New Method of Grinding the Spiral Surface Drill Point

螺旋面钻尖刃磨的新方法

On Relationship between Grinding Wheel Topography and Ground Surface Roughness

砂轮表面地貌与工件表面光洁度的关系

The Studies on Evaluation of Ground Surface Mechanical Damage of Ceramic and Grinding Based on Crack Damage Control

陶瓷磨削表面力学损伤评价及裂纹损伤可控磨削研究

The effect of OMC on the cement grinding was studied by the measurement of cement fineness, specific surface area and angle of repose.

通过水泥粉体的细度、勃氏比表面积及休止角等性能的测定，研究了OMC对水泥的助磨作用。

Effect of Grain Size of Grinding Wheel on Surface Topography

砂轮粒径对磨削后Si片表面形貌的影响

Finally through the variable grinding depth experiment, the contour analysis result is verified. The surface of the workpiece contour precision and the depth of hardening layer uniformity after processing are all improved.

最后通过变切深磨削轮廓实验验证了分析结果，加工后工件的表面轮廓平面度及淬硬层深度均匀性均得到改善。