surface rolling的例句大全

the mechanical surface treatment was concentrated on shot peening and rolling strengthening.

同时，还论述了机械表面硬化处理的表面喷丸强化和滚压强化。

study of the rolling frictions between the rubber tire and hard road surface

橡胶轮胎与硬质地面的滚动摩擦研究

During running-in, the rolling elements and seals burnish the surface, which leads to reduced friction coefficients.

在运行中, 滚动的内容和印章磨光表面, 从而降低摩擦系数.

The longitudinal surface crack on thin slab is a serious quality defect casting and rolling process.

薄板坯表面纵裂是连铸连轧生产线上的严重质量缺陷.

Prominent in the raceway surface and rolling direction parallel to the narrow shroud.

突出于滚道表面与滚动方向平行的窄凸肩.

There are two ways for the abrasive particle movement relative to material's surface: sliding and rolling.

磨料颗粒相对于材料表面的运动方向上主要可分解为两种运动方式, 即 滑动和滚动.

INQUIRY INTO DEFORMATION OF THE AXIAL SECTION IN CROSS ROLLING WITH HELICAL GROOVES AND INVESTIGATION OF ITS EXPERIMENT IN MOIRE METHOD Research on NC Grinding of Rotary Surface Parts with Arc Axial Section and Precision Controlling

螺旋孔型斜轧轴向断面变形的探讨及云纹实验研究圆弧轴截形回转面的磨削及精度控制方法的研究

Research on the forming reason of surface spot of cold rolling armor plate

武钢冷轧板表面斑迹形成原因探讨

Mixed lubrication; Average flow model; Rolling surface;

混合润滑；平均流量模型；轧制界面；

The surface is covered with ink by rolling over the surface with an ink-covered roller ( brayer), leaving ink upon the flat surface but not in the non-printing areas.

表面的轧制离开平坦的表面，但不是在非打印区域的墨水用油墨覆盖的滚子（稿样），表面上满是油墨。

The Simulation of The Bond Surface in The Process of Bimetal Plate Rolling by R.P.FEM

刚塑性有限元法对双金属轧制结合面的模拟研究

Cross breaks are formed on the surface of cold rolled and tempered strip during temper rolling, which influence the surface quality and mechanical characteristics of the temper rolled strip.

冷轧退火后的带钢在平整过程中产生横折印缺陷，严重影响平整后带钢的表面质量及其力学性能。

Strip breakage and roll wind-up frequently occur on the ZR 20 when rolling the fragile stock with severe quality problems such as worse shape, serious surface and edge defects.

森吉米尔轧机（ZR20）在轧制板形不好、板面和边部有严重缺陷的脆性原料时，经常出现的生产故障是断带缠辊。

Study for surface strengthening of withdrawal roll and wrapper rolls on hot rolling line

热轧板厂夹送辊和助卷辊表面强化技术研究

The nano-sized PTFE particle generat metal fluoride, forms physical boundary film and repair the injured surface. Submicron-sized PTFE works as rolling element, micron-sized PTFE hinders relative motion of the friction surfaces due to the distortion from pressing.

纳米PTFE微粒通过生成金属氟化物、微粒修复作用和形成物理边界膜，亚微米PTFE通过滚动体作用。微米PTFE在摩擦副间发生变形而阻碍摩擦表面相对运动。

It'still is full of contradiction, under quiet surface the rolling warm current surges.

依旧充满了矛盾, 在死一般的寂静皮表下翻滚咆哮着滚滚热流.

A crystallographic model has been presented for the surface roughness modelling of thin sheet rolling.

提出了晶体学模型来研究多层薄膜滚压的表面粗糙度。

ON THE ELIMINATION MEASURES OF PRESSURE PEAK DRIVEN BY ACOUSTICALLY UNSTABLE COMBUSTION IN VENTED GAS EXPLOSIONS Study on the strip surface wrinkles and the elimination measures in cold temper rolling

可燃气体爆炸泄压过程中声动不稳定燃烧压力峰减弱方法的研究

theoretical direction may be provided on judging defect of rolling workpiece surface.

从而为估测楔横轧成形阶梯轴类件时轧件表面是否会产生缺陷提供理论指导.

The fatigue strength can be remarkably increased after rolling, the reason is that there are the high residual compressive stresses in the surface stories; except that, the homogenizing of the microscopic stresses in the tempered martensite is an important factor.

对低温回火试样，滚压可显著地提高其疲劳强度，其原因除表层有较高的残余压应力外，滚压使表层回火马氏体内的微观应力均匀化也是一个重要因素。