system control position的例句大全

Gather to spread the system DCS to occupy the important position in the industry process control.

集散系统DCS在工业过程控制占有重要的位置。

High Precision Read-time Numerical Position Control System for Three-coordinate Grinding Machine

三坐标磨床实时高精度位置数控系统

The position detection of the spherical motor rotors, as an indispensable feedback control link, must be resolved satisfactorily, and its resolution can affect the control accuracy of the system directly and play an important role in the control system of the motor.

球形电机转子的位置检测作为电机不可缺少的反馈控制环节，其位置检测的分辨率直接影响到系统的控制精度，在电机控制系统中起到了至关重要的作用。

this paper discusses a correcting way of the rudder servo control system through frequency domain response design method and then focuses on the frequency characteristic of the position feedback, such as, phase margin, magnitude margin, syntonic peak value and close-loop bandwidth and so on.

在此基础上，通过频率域响应设计方法，进行位置反馈校正网络的设计。同时重点考察所设计系统的相角裕度、幅值裕度、谐振峰值、闭环带宽等频率特性量。

the stepping position servo system has extensive application foreground in research and experimentation of numerical control system.

该系统在对数控系统的研究开发和实验教学中具有广泛的应用前景。

the modular product planning of edge position control system based on the modular matrix

基于模块矩阵的边缘位置控制系统的模块化产品规划

this research is available for realizing high accuracy hydraulic servo system "s position control by adopting the linear control theory. "

该研究对采用线性控制理论实现液压伺服系统的高精度位置跟踪控制有一定的帮助。

design and implementation of the system monitor position of the subarea control center of the atc system

空管系统分区管制中心系统监控席设计与实现

mechanism characteristics and position control system of a heavy and medium plate mill are introduced.

介绍了某中厚板厂轧机的机械特性及位置控制系统。

for the position and the attitude control system, a method of average aerodynamic forces and moment is designed. at the end of each wing beat, the controller schedules the desired parameters of flapping wing according to state feedback errors.

设计了一种以周期平均气动力和气动力矩代替瞬时气动力和气动力矩的控制方法，即在每个拍动周期结束后，检测系统状态参数，根据状态误差调整拍翅参数。

a new developed electrical control vvt system is presented which uses a tensioner with variable working position to change the intake valve-closing angle.

本文介绍了一种基于可变位置液压张紧器机构实现控制进气门关闭相位角的电控可变配气相位系统。

the pointer position of the rotary vane meter is equipped with a pulse switch used for transmitting a pulse signal to the control system.

在所述的叶轮式水表的指针部位设一将脉冲信号传递给控制系统的脉冲开关。

the 16-bits single-chip computer (89c196kc) and resolver are used to realize the position servo control of antenna pointing system.

系统采用89C196KC单片机和多极旋转变压器实现了卫星天线指向系统的位置伺服控制。

for the sake of simplicity and low cost, in some closed-loop position and velocity control system design, we use the hall sen-sor to produce position and velocity feedback signal, thus do not need the optoelectronic pulse encoder.

在闭环的位置和速度控制系统的设计中，为了使系统简单可靠和成本低，倾向于只用电机自身的霍尔传感器的信号进行位置和速度反馈，不需要另外安装别的检测元件如光电脉冲编码器等。

in this paper, we use fractional pid control method to achieve control of the system simulation, and we chose hydraulic position servo system as a plant.

本论文主要研究以液压位置伺服系统为被控对象，采用分数阶PID控制方法实现对系统的控制仿真。

accomplishing float position of hydraulic system with pilot control for loader

装载机先导操纵液压系统浮动位置的实现

modeling and simulation of hydraulic cylinder position control system based on high-speed on-off valve pilot control

高速开关阀先导控制的液压缸位置控制系统建模与仿真研究

based on the hydraulic position servo system, we use three controllers to correct control system, integer order pid controller, fuzzy adaptive pid controller and fractional pid controller.

以液压位置伺服系统为被控对象，分别采用整数阶PID控制器、模糊自适应PID控制器和分数阶PID控制器实现控制仿真。

pipe line parameter optimization and design for electro-hydraulic position control system

电液位置控制系统中管道参数的优化和设计

pneumatic on-off valve motor position servo control system based on profibus dp

基于ProfiBus DP的开关阀式气马达位置伺服系统