tangent method的例句大全

The tangent offset method and the deflection angele method have been applied to setting out and surveying the curves in railways, highways and so on for many years.

铁路公路等曲线测设中，多少年来都是用切线支距法和偏角法。

Research on stereo vision measuring method for tire tangent plane

轮胎切平面的立体视觉测量方法研究

The existing algorithms include equivalent left and right curve angle by definition, normal section line method and tangent projection etc. But all their precisions are limit to one-order truncation error, and make severe accumulate error on discrete models.

有关的算法有根据定义的左右曲面角相等，法截面法和切向投影等。这些方法的精度都局限在一阶截断误差，在离散的网格上有严重的累积误差。

Aimed at the problems existed of coupling over the speed limit for running cars from hump in Liuzhou South marshalling station, this paper put forwards the method and suggestion of fully utilizing the function of the system and rising control accuracy of exit speed of tangent retarder area.

文章针对柳州南车站驼峰溜放车辆存在的超速连挂问题，提出充分利用系统功能，提高车辆三部位出口速度控制精度的方法和建议。

It is to use finite element method to calculate the stress within the slope in this paper, and get the normal stress and tangent stress of the slope sliding surface directly, and then calculate the stability coefficient of the slope.

本文研究内容是应用有限元法计算斜坡内部的应力，并直接求解边坡滑动面上的法向力和切向力，进一步计算边坡的稳定系数。

It makes the Tangent Sphere Method more simple by the coincidence of the horizontal plane of projection in counter-revolution with the vertical plane of projection.

在球络法作旋转曲面的阴影中，则为使水平投影H的反旋转与直立投影面v相重合，因而更简化了这种球络法。

It is a convenient method to derive tangent stiffness of any members and structures.

利用该解构规则形成切线刚度矩阵的方法简单、直观，通过平面梁元例题验证了可利用该方法求得任何单元或结构的切线刚度矩阵。

Through improving the displacement loading control method based on the tangent stiffness, this paper has presented displacement loading control method based on the secant stiffness.

在基于切线刚度的位移加载控制法基础上进行改进，采用基于割线刚度的位移加载控制方法，并绘制了相应框图。

Through properly improving the Newton-Raphson method of solving system of equations based on the tangent stiffness, this paper presented Newton-Raphson incremental-iterative mixed method based on the secant stiffness.

在传统基于切线刚度的Newton-Raphson法求解方程组基础上进行适当地改进，采用基于割线刚度的Newton-Raphson法，并绘制了流程图。

In this paper, the tangent stiffness matrix, including load stiffness matrix, of a thin shell element with large defleCtions is derived, and the equilibrium path tracing method is introduced.

本文简要推导了包括荷载刚度矩阵在内的大变形等参数薄壳单元的切线刚度矩阵，并介绍了平衡路径的跟踪方法。

It is stressed to study the effect of geometrical imperfections on the structural stability in the paper The tangent stiffness matrix is created based on the beam-column theory, the dynamic stability is solved by the improved displacement control method.

首先基于梁柱理论建立结构的切线刚度矩阵，然后对适用于静力稳定性分析的广义位移控制法进行改进，将其用于结构的动力稳定性分析。

Tangent stiffness matrix for spatial concrete filled steel tubular ( CFST) pole element of geometric nonlinearity coupled with material nonlinearity under large displacement and large strain which was deduced with co-rotational coordinate method was proposed.

采用共旋坐标法导出钢管混凝土杆单元在大位移、大应变条件下的空间几何、材料非线性耦合的单元切线刚度矩阵；

In this paper, the element tangent stiffness matrix of spatial fold cable element under initial stress condition and nonlinear simultaneous equations for finite element method which can be used in nonlinear analysis and calculation of prestressed lattice structures are developed by studying the prestressed cable element.

通过对于预应力索单元的分析研究，推导了具有初始应力的空间折索单元的单元切线刚度矩阵的计算公式，并且建立了可用于预应力空间网格结构非线性有限元分析的非线性方程组。

On the Graphic Method That Proves the Theorem About the Locus of the Center of the Sphere Tangent to Two Skew Lines in General Position

关于与两交错直线等距离的点的轨迹的图解定理

In this paper, the tangent vector loading method and the boundary element restrain method was presented.

采用了切线矢量加载和边界单元的约束方法建立分析模型。

The method of mapping through tangent vector is introduced to obtain ideal point location in physical space, which improves the mesh quality around the poles.

采用切矢映射法，使得理想点的求取可以在物理空间中实现，提高了周期性退化曲面极点处网格的质量。

On this basis, the surface heating is predicted with the above methods. Surface pressure distribution is provided with the engineering methods such as Newton method, tangent-wedge/ cone method, and so on.

在此基础上，对于无粘流区，采用牛顿法、切楔/切锥法等工程方法确定物体表面压力分布，利用等熵条件确定边界层外缘参数；

A new method to draw conical curves by the common tangent circle

圆锥曲线的公切圆作图法

The simple untie problem method of the tangent of curve

曲线切线的简易求法

Graphic Method of Drawing Tangent for Plane Curve

用作图法求平面曲线的切线