tangential method的例句大全

Mouth continuity of the tangential field condition of the gap and the gap within the field of the external field, to form a FEM+ BI ( finite element-boundary integral method) equations, by direct method to solve the export side edge field.

用口面上切向场连续性条件把缝隙内场和缝隙外部场联结起来，形成FEM+BI（有限元&边界积分法）矩阵方程组，通过直接法求解出口面棱边场。

Tangential radiation field radiotherapy is an ordinary method in treatment breast cancer.

乳腺癌切线野照射是一常用的放疗技术。

The traditional method of treating with data is optimizing method in monitoring furnace tangential fluid field by acoustic method.

利用声波法监测炉内切圆流场，传统的处理数据方法是优化求解法。

Then, the gained network model is trained and simulated. The result of simulation shows that BP neural network which is used in monitoring furnace tangential fluid field by acoustic method on line is feasible.

然后，对该网络模型进行训练与仿真研究，结果表明，BP网络可以快速、准确和稳定地映射炉膛四角切圆流场特性，把BP神经网络应用于声波法监测炉膛切圆流场的在线监测具有可行性。

During choosing data, network layer, study step and momentum coefficient, we all us the method of as training network as modifying it, BP neural network that adapts to monitoring tangential fluid field with acoustic method comes into being.

本文从样本的选取，网络层数的确定，以及学习步长、冲量系数的最佳取值，都是采用边训练边修改的方式，形成了适合于声波法切圆流场监测的BP网络。

Application of Quasi streamline Numerical Simulation Method for a Boiler Furnace with Tangential Firing

近流线数值计算方法在四角切圆燃烧炉膛中的应用

Centripetal force and tangential force or centrifugal force and tangential force could be used as a strain analysis method.

用向心力和切向力或离心力和切向力进行胁变分析是可行的。

The practical examples verify that the deviation of the simplified method is less than 5% for the tangential force and 15% for the radial force.

实例验证表明，简化计算方法所带来的偏差切向力不超过5%，径向力不超过15%。

Using Tangential Force Method to Detect the Singular Points and to Discriminate Their Stability Conditions of a Movable Mass Point on any Guide Curve Rotating about a Vertical Axis without Friction

用切向力法寻求绕铅垂轴旋转导轨上滑动质点的奇异点及其稳条件

In this study, strain process of three varieties was analyzed, results showed that: 1. Centripetal force and tangential force or centrifugal force and tangential force could be used as a strain analysis method.

通过3个品种的胁变过程的分析，表明：1.用向心力和切向力或离心力和切向力进行胁变分析是可行的。

If the conditions of single direction of normal force and the friction due to tangential force are satisfied to the finger-tip, the presented method is available to solve the grasping forces of flexible robot hand.

在指端的法向作用力满足单向性条件及切向作用力满足摩擦条件的前提下，给出了一种求解柔性手抓取力的行之有效的方法。

In addition, considering that DDA could accurately solve the tangential sliding force, the reasonable factor of safety could be obtained by combining strength reduction method.

同时，鉴于DDA方法能够精确地求解切向滑动力，结合强度折减法能够获得比较合理的安全系数。

To improve the flux of membrane distillation, a rotary tangential inflow method is used to enhance the mass transfer process, and its numerical simulation and mechanism study have done.

为了提高膜蒸馏通量，使用了旋转切向入流的方式来强化传质过程，并对其作了深入的数值模拟和机理研究。

The predicting of large deformation in the tunnel has been given by using of two effective measures of forecasting-geological and complex forecast method and tangential strain predicting method. The result is that the probability of large deformation in this tunnel is non-existent.

运用地质综合分析预测、切应变预测两种方法对雪峰山隧道的大变形问题进行了预测，预测结果表明，雪峰山隧道不会出现大变形问题。

Based on this principle, there are 29 types of circles constructing in Cartesian rectangular coordinate which has simple tangential condition. The method of constructing these circles by rules and compass are presented in this paper.

根据这一原理，可知在直角座标系中具有简单相切条件的圆的作图有29种类型，作者分析介绍了用圆规和直尺画这些圆的方法。

Algebraic equations are solved by iteration with a line-by-line method that is a combination of TDMA in axial and radial directions, CTDMA in tangential direction and ADI method in three directions.

在轴向与径向用三对角矩阵法（TDMA），在周向采用循环三对角矩阵法（CTDMA），采用交替方向亚松弛叠代法（ADI）求解方程；

In addition, the calculation method of the vertical and tangential coefficient of subgrade reaction is discussed, and this paper puts forward the simplified calculation method of the tangential coefficient of subgrade reaction.

此外，本文还对地基土的竖向基床系数和切向基床系数的取值方法进行了探讨，并提出了后者的简化确定方法。

The method developed in the article also can be used to calculate the boundary tangential stress of higher boundary elements.

所研究的方法也适用于高次边界单元的边界切向应力的计算。

In this paper, difference method is used for solving tangential stress at the boundary on the basis of BEM.

本文在边界元法分析的基础上，用差分法计算边界切向应力。

The tangential stress at the boundary can not be gained directly in the application of Boundary Element Method to analysing elastic stress.

在用边界元法作弹性应力分析中，不能直接计算出弹性体边界切向应力。