tank pressure的例句大全

The precool rate, feeding speed, tank pressure, precool time will be strictly controlled to protect the equipments and technical pipe from being damaged by the large cold shrinkage, high temperature difference, and high stress.

控制预冷速度、进液速度、储罐压力、预冷时间，可防止产生较大的冷收缩和温差应力而损坏设备与工艺管道。

This paper provides methods of calculating the ship ′ s ballast tank pressure loss. We can provide the theory basis to the ballast pump optimized design.

提供了一种计算船舶压载舱压力损失的方法，为船舶设计或选用更换压载水的压载泵提供参考。

The mechanism model is built in the paper. In loading process, cargo tank pressure is kept in certain value by using high duty compressor.

建立了装卸货过程中液舱温度、压力的机理模型，装货过程中利用高负载压缩机对液舱压力进行控制。

For keeping tank pressure in design range, some of boil off gas need to be released form tank through boil off gas treatment system in order to control tank pressure.

而大型储罐的承压能力是较低的，为了保证储罐内的压力在设计允许范围内，需要通过蒸发气处理系统排出部分蒸发气以控制罐内压力。

A direct-acting vent valve is tightest when tank pressures are percent or less of set pressure.

当罐压力为设定压力的75%或更低时,直接作用式通气阀有最好的气密性.

when tank pressures are 90 percent or more of set pressure, seat leakage is common.

当罐压力为设定压力的90%或更高是, 阀座的泄露很常见.

Influence rule of tank pressure on thermal stratification in liquid hydrogen tank

气枕压力对液氢贮箱热分层的影响规律

The vent system must keep the tank pressure within the permitted limits during ground pressure refueling.

飞机地面压力加油系统通气能力计算是飞机燃油系统设计的重要环节。

Shorter suction time and higher suction velocity could be obtained when initial tank pressure was set at 2mH_2O compared with 4mH_2O.

预抽压强为2mH2O时能获得较4mH2O时更短的罐满时间和更高的吸入流速。

An inert pad and purge system normally has a supply regulator and a back pressure regulator to maintain interior tank pressure within a narrow range.

一个惰性气封和吹扫系统通常包括一个进气调节器和一个排放压力调节器，可在小范围内维持储罐压力。

In the paper, we introduce the whole perspective and methodology of the gasoline tank pressure measuring and controlling system based on 8031, the paper also states the operation principle of the whole system, the key techniques in designing the hardware circuit and software.

本文介绍了基于8031单片机开发的汽油箱内汽油蒸汽压力测控系统的总体设计思路和方法，阐述了整个测控系统的工作原理、硬件和软件设计及相关技术问题。

a pilot-operated vent valve for pressure relief uses tank pressure, not weights or a spring, to keep the vent valve seat closed.

先导式通气阀泄压时利用储罐压力，而不是重力或弹簧外力，来保持通气阀阀座关闭。

In order to ensure ship safety, we must know the ship ′ s ballast tank pressure loss.

为了确保更换压载水时船舶的安全，设计船舶时必须对船舶压载舱压力损失进行计算。

When the tank pressure of the gas control valve in the mechanical ventilator pressure within the breathing valve does not move and maintain airtight tank;

当罐内气体的压力在机械呼吸阀的控制压力范围之内时，呼吸阀不动作，保持油罐的密闭性；

The results indicated that the material conveying capacity and tank pressure increased, the material mass ratio of solid and gas in the outlet decreased with the raising of fluidized air quantity.

试验结果表明，物料输送量和流化罐压力随着流化空气量的增加而增加；流化罐出口物料固气质量比随着流化空气量的增加而减小。

Numerical Model of Fuel Tank Pressure Building up Process in Energy Supply System

挤代加泵抽式能供系统燃料舱增压过程数学模型

Catastrophe in sudden boosting of LNG tank pressure under thermal attack

热侵袭下液化天然气储罐升压的突变机理

The effects of different insulation, tank pressure and injection situations on the precooling process were investigated.

研究了输送管壁不同绝热条件、贮箱增压及气体引射对自然循环预冷过程的影响。

Modeling and Simulation Research on the intensity modulation function of fiber optic bundle sensors based on fiber pair optically powered handy oil tank pressure sensor

基于单光纤对模型的光纤束调制函数的建模与仿真单光纤传输光推动便携式压力测量仪的研究

Oil Tank Automatic Measuring System and Pressure Transmitter

油罐自动计量系统与压力传感器