taper的例句大全

The results showed the voidage ratio of taper spiral packing,θ-ring packing and metal gauze corrugated packing was 0.823:0.947:0.855, and under the same liquid sprayed density, the pressure drop ratio of unit height of packing layer was 0.58:1.10: 0.62.

流体力学性能测试中，锥度螺旋填料、θ环和丝网波纹填料三种填料的空隙率之比为：0.823：0.947：0.855时，在相同喷淋密度下，单位高度填料层压降之比却为：0.58：1.10：0.62。

The true evaluation for effective quality of taper spiral spring

圆锥形螺旋弹簧等效质量的准确计算

NIB: Green roller defect on the small end radius; caused by taper die failure. A sharp protrusion on the small end of the roller.

由于圆锥模具缺陷造成的半成品滚子小端倒角缺陷，滚子小端有尖锐的突出。

Previous formulae [ 1,2] took the web ratio factor into the coefficient of length, regarding web-tapered member as a uniform one with the same cross-section of the small end.

以往的公式[1,2]采用将楔杆等效为以小端截面作为等直杆的截面、将渐变的影响计入计算长度系数的方法；

Due to the strong constraint from the base and the indenter, the size effect of micro-pillar strongly depends on the pillar geometry ( i.e. the pillar size, the ratio of pillar height to width and the taper), the slip plane orientation and so on.

由于基座和刚性压头的约束作用，微柱的尺度效应强烈地依赖于微柱几何（宽度、高宽比、锥度）和滑移面取向角等多种因素。

Structure Improvement of 474 Transmission Gearbox Reverse Gear Taper Link

474汽车变速器倒档锥度环的结构改进

Study on air distribution characteristics in taper jet stream

圆锥形送风射流特性的研究

The development of labeling function on taper and pitch in mechanical CAD system

机械CAD中有关锥度和斜度标注功能的开发

High speed cutting will shape up "V" taper.

高速切割时会形成“V”形锥度。

According to the evaluation criterion of velocity and mass flow rate, the gas dynamics performance of taper nozzle in kerf excels obviously than that of convergence nozzle. And with the increasing of stand off distance, at least two reasonable cutting scopes exist.

由速度和质量流率评价标准可发现，收敛型喷嘴切缝中气体的动力学性能都明显优于锥型喷嘴，且随着喷嘴工件距的变化，至少存在两个合理的切割区域范围。

the candlestick was in the form of an angel holding a nosegay ， in the centre of which the wax taper was to be placed.

它的形状是一个抱着花束的安琪儿；而蜡烛就插在这个花束的中央。

According to track theory, automatic follow can be divided into three systems step-advance track, taper-scan track and single-pulse track.

按跟踪原理，自动跟踪可分为三种体制：步进跟踪、圆锥扫描跟踪和单脉冲跟踪。

Ball joint taper must be free of grease.

切勿将润滑剂涂抹在球头锥上。

Hoisting construction of water tank of reverse taper water tower

倒锥形水塔的水柜提升施工

Simple numerical control machining of taper cutting tools with equal helix angle

等螺旋角锥度刀具简易数控加工法

Grinding Process of Taper Bore in a Large Diameter Gear

大直径齿轮锥孔磨削工艺

Measuring Instrument for Taper of Cone Roller The construction of taper roller bearing is introduced.

首先，简述了圆锥滚子轴承的结构，给出了标准设计中的装配图和零件图；

This paper presents a method that the stem taper curve of standing tree can be estimated with a considerable precision without the taper table.

该文探讨了不用编制削度表直接建立高精度立木干曲线的方法。

Studies of taper equations and the table of merchantable volumes

削度方程和出材率表的研究

Taper spiral LINE-FASHION periodic table of the elements

园锥螺旋线式元素周期表