temperature optimization的例句大全

Optimization of Heat Sink Encapsulated with Phase Change Material for High Temperature Ambient

高温环境下封装有相变材料的热沉结构优化

The experimental results show that the optimization parameters of nickel electroless plating on polyurethane plastic foam are that pH value is about 8.0, and the temperature is about 45 ℃.

实验结果表明，在聚氨酯泡沫塑料基体上进行化学镀镍，它的最佳工艺参数是pH值为8.0左右，温度控制在45℃左右。

Particle swarm optimization ( PSO) algorithm is adopted to optimize the center of fuzz K-means ( FKM) with kernel function, which is used to classify the temperature of blast furnace.

提出了一种高炉炉温分类辨识的方法PSO-K-FKM，该方法采用基于核函数改进的模糊K均值聚类，利用粒子群对聚类中心寻优。

Using BP neural networks and the Fourier neural networks which was proposed in this paper, the fermentation time model and the optimization fermentation temperature model is proposed.

以提高间歇式微生物发酵的产品得率为目标，利用BP神经网络和本文提出的傅立叶神经网络，提出发酵过程的发酵时间模型和最优发酵温度模型；

Not only the system detects the IGBT module temperature and ambient humidity, but also analysis the waterways in cooling system of module to select the best optimization model.

对于IGBT的模块温度和环境湿度检测之外，本文还对模块散热系统中的水道进行模拟分析，得出最优化模型。

The optimization technology are obtained using the method of response surface experiments, the freezing time is 23.56 h, the freezing temperature is-20 ℃ and the ratio of liquor to material is 8.73 ∶ 1 ( V/ m).

经响应面分析优化得到了最佳工艺条件为：温度为-20℃、冷冻时间为23.56h、液料比为8.73∶1（V/m）。

Strength analysis and structural optimization for large-calibred gate valve body by using AWE It is applicable to big ranges of pressure, temperature and caliber, especially to the pipeline of moderate or big caliber.

基于AWE的大口径闸阀阀体强度分析与结构优化闸阀适用的压力、度及口径范围很大，尤其适用于中、口径的管道。

Operation Characteristics Study of Modular High Temperature Gas-Cooled Reactor Nuclear Power Plant Optimization of Leakage Calculation in RCP System of PWR

模块式高温气冷堆核电站的运行特性研究压水堆核电厂一回路冷却剂泄漏率计算的优化

The synthetic yield is increased to 65.3% and the reaction time is shortened by optimization through comparing the quantity of potassium carbonate, molecular weight of PEG, reaction time and temperature by using the orthogonal design.

通过正交实验设计对K2CO3的量，PEG的分子量，反应时间和温度进行优化，提高了合成产率，使产率达到65.3%，同时缩短了反应时间，收效明显。

PID parameters self-adjusting control algorithm used for a constant furnace temperature control system in a molecular sieve activator of thermal imaging equipment is proposed. Based on the optimization rule for PID parameters, the algorithm automatically adjusts PID parameters by means of step searching.

提出了一种用于某热成像设备分子筛激活机中恒温炉温控系统的PID参数自整定控制算法，它基于PID参数的优化规律利用步进搜索的方法实现对PID参数的自动整定。

by optimization of the technological conditions, the reactive product has low diethylene glycol content, and has stabilization in low temperature.

通过优化工艺条件，合成的产品具有二甘醇含量低，低温条件下稳定性好的特点。

consider the vehicle running time in the urban roads and the day temperature changes on time, it is going to arrive cold-chain logistics transportation for vehicle routing optimization model in accordance nature of the use of soft time window constraints on the objective function.

考虑城市道路中车辆运行时间和一天之中温度变化得依时性，使用软时间窗限制等对目标函数进行优化，得出冷链物流车辆路径运送问题的优化模型。

optimization of low temperature ion sulfurizing

低温离子渗硫工艺优化

investigation of temperature measurement accuracy at low-temperature measurement range and the optimization of wavelength bandwidth

单波长测温仪低温段的测温精度与波长带宽的优化选择

continuous detection of the temperature inside or outside cocoon cavity and cocoon cooking degree is of great significance to the optimization of cocoon cooking and the design of cocoon cooking machine.

煮茧中对茧腔内外温度和茧子熟度的连续检测，对优化煮茧工艺、煮茧机优化设计及煮茧研究都极有意义。

through orthogonal experiment optimization analysis and significant factor analysis, we preliminary got the effects of process conditions on chlorine dioxide bleaching solution: the mole rate of sodium chlorate and hydrochloric acid mostly affected the purity of chlorine dioxide and temperature took second place.

通过正交实验最优化分析和显著因子分析，初步得到工艺条件二氧化氯溶液的影响，由正交实验的极差分析和方差分析可知，氯酸钠与盐酸的摩尔比对二氧化氯纯度影响最大，温度的影响次之。

Application of statistics experiment to the optimization of copper blackening solution at room temperature.

运用统计学试验设计方法研究了不同的因素对铜常温发黑剂体系的性能影响.

The integral problems on temperature prediction, heating optimization and power control in tumor hyperthermia are discussed.

研究了肿瘤热疗中实施组织温度场预示 、 优化加热及功率调节一体化的问题.

Polymerization reactor temperature control and beer saccharification formula optimization are urgent need to be solved.

聚合反应釜温度控制和啤酒糖化配方优化是当前企业迫切需要解决的问题.

American farms are increasingly agribusinesses. Comprehensive optimization of joint closure temperature field and its shape for arch dam

美国的农场越来越成为农业综合企业。拱坝封拱温度场及体形综合优化方法