temperature property的例句大全

the result also showed that the heat-treatment temperature and time had great influence on the electrochemical property of the sample, the performance of the sample was better when it was heat-treated for 20 hours at 120 ℃.

另外，研究结果表明，样品的热处理温度与时间对样品的电化学性能有较大的影响，在120℃热处理20h的样品性能稳定。

In this paper, the influence of pH value and temperature to woolen fabric dyeing with M reactive dye, as well as deacetylation, concentration and molecular weight of chitosan to dyeing property of chitosan treated woolen fabric were all discussed.

探讨pH值、温度对羊毛织物的M型活性染色影响，以及壳聚糖脱乙酰度、浓度及分子量等对经壳聚糖处理后的羊毛织物染色性能影响。

In recent years, the family of bismuth layer-structured ferroelectrics ( BLSFs) has attracted much attention for their potential use in high temperature piezoelectric devices and ferroelectric random access memories ( FeRAMs), because of their relatively high Curie point and excellent fatigue endurance property, respectively.

近年来，铋系层状铁电体（BLSFs）由于其相对较高的居里点和出色的抗疲劳特性，可能潜在应用于高温压电器件及铁电随机存储器而引起人们越来越多得研究兴趣。

The effect of press temperature on ECAP process of Cu-25.04% Zn-3.83% Al-0.2% Zr ( wt%) shape memory alloy, microstructure and mechanical property ware studied.

研究了挤压温度对Cu Zn Al形状记忆合金等通道转角挤压（ECAP）过程的影响以及挤压后合金组织和性能的变化。

Temperature and strain sensing property of grapefruit microstructure fiber Bragg grating

柚子型微结构光纤Bragg光栅温度和应变传感特性研究

results the property of freeze dryer, the variation of lyophilized process and the change of temperature of plates may induce rough crystal of products.

结果冻干机性能好坏、冻结过程的改变和制品入箱时冻干机板层温度的变化是决定制品产生粗结晶的主要因素。

A Study on High temperature Mechanical Property of F/ A Dissimilar Metal Welding Joints

异种钢焊接接头高温力学性能的研究

The material property change with the temperature, the convection and radiation boundary conditions were considered. The effect of internal flowing media on temperature field was defined as a forced boundary condition.

模拟中考虑了材料性能随温度的变化以及外界对流和辐射的影响，内部介质流动对焊接温度场的影响定义为强制对流换热边界条件。

The effects of forging temperature on mechanical property and microstructure of TC 4-DT titanium were researched.

研究不同的锻造温度对TC4-DT棒材力学性能及显微组织的影响.

In this paper, the concept of equivalent temperature deference is provided by analyzing the deformation property of building material.

通过对房屋材料的温度变形性能分析，提出了当量温差概念；

After the heat treatment, the room temperature tensile strength and yield strength are improved and plasticity decreases with the decrescence of wall thickness, but the tensile property in high temperature decrease apparently in comparison with that in room temperature.

热处理之后，随着铸件壁厚的减小，合金的室温抗拉强度和屈服强度提高而塑性降低，而高温拉伸性能较室温明显降低，薄壁件性能下降幅度较大。

Luminous flux, color temperature and color rendering property are the three main index in light source.

光通量、色温和显色性是光源的三大重要指标。

The technological process and continuous production line of nylon ( PA) 12 tube was analyzed. The influence of extruding temperature and speed on product property was discussed.

分析了尼龙（PA）12管材的生产工艺流程和连续生产线，探讨了挤出温度和挤出速度对管材性能的影响，测试了PA12管材的性能。

The mechanical property of three inflation sieve tube base tubes was influenced by well temperature in different extent.

即，三种膨胀筛管基管材料的力学性能都不同程度地受到井下温度场的影响。

Experimental study on the inorganic chemical anchor bolt property after high temperature effect

高温作用后无机化学锚栓性能试验研究

Research on the Effect of Ambient Temperature on Mechanical Property and Damping Performance of Metal Rubber Material

环境温度对金属橡胶材料力学特性和阻尼性能的影响研究

Based on this, the effect of high temperature aging and stress on the metallograph and corrosion property is studied.

并在此基础上，研究了高温时效和应力的作用对双相不锈钢金相组织和抗腐蚀性能的影响。

The study on the relationship between temperature and conductivity property of P type diamond films were reported.

研究了温度对P型金刚石薄膜电导性能的影响。

The results of experiment show that WS2 submicron particle can enhance the tribology property, including anti-wear, antifriction and extreme pressure, of two main high temperature grease-lithium complex grease and complex calcium sulfonate grease.

本文的主要研究结果有：1.通过实验发现WS2亚微米粒子能大大提高两种主要高温润滑脂：复合锂基润滑脂和复合磺酸钙基润滑脂的抗磨、减摩、抗极压等摩擦学性能。

The effect of coalescent, formation temperature, formation time on latex coatings wet-abrasion property was discussed.

本文研究了成膜助剂、成膜温度和成膜时间对乳胶漆耐洗刷性能的影响