temperature saturation的例句大全

Conductivity and saturation temperature method for determination of wine stability

论葡萄酒的电导率和临界饱和温度

At the same time, the effects of Ca/ S ratio, desulfurization residues recycling use, saturation temperature interval, water spray quantity and SO_2 concentration on desulfurization rate were studied.

试验同时研究了钙硫比、脱硫灰循环率、饱和温距、喷水量和SO2浓度等对脱硫率的影响。

Also when interpreting temperature logging, we must consider the effects of porosity, saturation and adjacent rock lithology on temperature profile.

另外在进行井温测井解释时，一定要注意孔隙度、饱和度以及围岩岩性对温度剖面的影响。

Study on the Measurement Methods of Curie Temperature and Saturation Magnetization

居里温度和饱和磁化强度测量方法的研究

The change of extracellular environment ( pH, temperature, saturation of O2).

细胞外环境（pH、温度、氧浓度）的改变等。

Influences of temperature and saturation states on the precipitation rate of calcium carbonates in seawater ⅰ. Mg-calcite

温度和过饱和度对海水中碳酸钙沉淀速率的影响Ⅰ.镁方解石

Sandstone geophysical response and elastic modul vary laws with pressure, temperature, saturation, liquid character in high pressure& high temperature are studied.

通过大量实验室研究分析在地层条件下（高温、高压）砂岩的地球物理特征及其弹性模量随压力、温度、饱和度、流体性质的变化规律。

The Curie temperature and saturation magnetization of manganese-zinc ferrite were measured by using the electric bridge method, induced method and vibrating sample magnetometer ( VCM).

分别用电桥法、感应法和振动样品磁强计对锰锌铁氧体的居里温度和饱和磁化强度进行了测试。

The effects of foaming temperature, saturation pressure and shear rate on the cell morphology of foamed PLA in microcellular foaming process of supercritical CO2/ PLA were investigated.

研究了超临界CO2/PLA微孔发泡过程中，发泡温度、饱和压力、剪切速率对聚合物PLA泡孔形态的影响。

The results showed that the cell morphology of a foamed blend was significantly impacted by foaming temperature and saturation pressure. A lower foaming temperature and a higher saturation pressure were more favorable for leading to a decrease in cell size and an increase in cell density.

结果表明：发泡温度和发泡压力对共混物的微孔形貌影响显著，降低发泡温度和提高发泡压力均能降低泡孔的孔径和提高泡孔的孔密度。

The influence of temperature, iron saturation and pH on antibacterial activity was studied.

研究了铁饱和度、pH、温度和阳离子对转铁蛋白抑菌性能的影响。

The regular changes on pressure field, temperature field and saturation field of horizontal wells are also presented.

总结了水平井的压力场、温度场和饱和度场的变化规律。

The most important physical process to form fog drop is by falling the temperature to the saturation point.

降温是达到饱和形成雾滴的最主要、最重要的物理过程，在自然界中的霾滴通过吸湿过程增长成雾滴几乎不可能。

Amendments on the Traditional Exposition of Wet-Bulb Temperature and Adiabatic Saturation Temperature of Drying Gas

干燥介质湿球温度与绝热饱和温度&经典论述的修正与补充

Characteristics of Temperature and Output Saturation in InGaAsP/ InP Double Heterostructure Light Emitting Diodes

InGaAsP/InP双异质结发光管光功率的温度和饱和特性

PC foams were prepared by a foaming simulator at different processing conditions of foaming temperature, gas saturation pressure.

采用自制的微孔发泡模拟机研究了温度和压力以及气体饱和时间对微孔聚碳酸酯（PC）泡孔结构的影响。

Indicating the temperature when the saturation water vapor in the air reaches the saturation state and generates liquid water on the plane surface.

是指空气中饱和水汽达到饱和状态并在平面表面产生纯液态水时的温度。

Temperature dependence of saturation magnetization and effective magnetic anisotropy of fe_ ( 83) nb_6b_ ( 11) alloy

Fe（83）Nb6B（11）合金的饱和磁化强度和有效各向异性

Some amendments on the traditional exposition of wet-bulb temperature and adiabatic saturation temperature of drying gas have been made in this paper, which makes them both more scientific and rigorous.

本文修正与补充了干燥介质湿球温度与绝热饱和温度的经典定义及论述，使其更加科学与严谨。

The Curie's temperature Tc and saturation magnetization decreased obviously by Sr substituted with Cu or Ag and Sr2+ vacancy in the samples, while the initial susceptibility is increased.

通过用Cu或Ag部分替代Sr和少量Sr空位，使样品的居里温度和比饱和磁化强度比替代前的La（0.67）Sr（0.33）MnO3材料显著降低，而起始磁化率反而增加。