temperature stability的例句大全

Research on the temperature stability of high-voltage power supply

直流高压稳压电源温度稳定性研究

The Analysis of the Indoor Temperature Stability in the Two Kinds of Heating Methods

两种采暖方式室内温度稳定性分析

The pressure and the temperature distortion can cause the compressor to lose the stability and enter the buzz. When the engine loses steadily, it can endanger the flight safety directly.

对气流最敏感的部件是风扇和压气机，恶劣的压力和温度畸变会使得压气机丧失稳定性进入喘振，发动机的失稳会直接危及飞行安全。

The influence of the pressure and temperature distortion to the engine stability is one of important target to evaluate aircraft engine. The fan and compressor is the most sensitive part to the air current.

压力和温度畸变对发动机稳定性影响的评定是当代航空燃气涡轮发动机适用性战术指标的重要内容之一。

With good stability and liquidity, solvent cold patch asphalt mixture will be suitable for construction operation at low temperature climate in winter or in the season with rain or snow.

溶剂型沥青冷补液具有很好的稳定性与流动性，配制出的冷补沥青混合料具有较好的稳定度和较高的成型强度，适合在冬季或者多雨雪季节进行施工操作。

According to the total pressure and temperature distortion question in the aircraft engine using process, this article closely track overseas development tendency and develop one mathematics physical model to evaluate the compressor system stability.

本文根据当前航空发动机使用过程中遇到的总压和温度畸变问题，紧密跟踪国外发展趋势，发展了一种在发动机环境下评定航空燃气涡轮发动机压缩系统稳定工作边界的数学物理模型。

The magnitude of pressure distortion and temperature distortion determines the severity of the combined distortion effect on the fan or compressor stability.

压力畸变和温度畸变的相对大小，决定了组合畸变对风扇或压气机稳定性影响的严重程度。

An investigation on the high temperature characteristic and the stability of power silicon semiconductor devices

电力硅半导体器件耐压的高温特性和稳定性的研究

Under high temperature action, the structure and surface appearance of coal bodies around the blind hole gasifier have changed, and formed the distillation combine zone, which improves load carrying ability and integral stability for coal bodies around gasification stove.

盲孔炉四周煤体在高温作用下，其组织结构和表面形态都发生了质的变化，形成干馏组合碹，从而提高了气化炉周围煤体的承载能力和整体稳定性。

More attention has been paid to composites` temperature sensibility and the stability and affecting factors are specifically analyzed in experiments.

其中着重研究了复合材料的温敏特性，对其影响因素，稳定性作了详细的试验分析。

The effect of combined distortion on engine stability is not a simple addition of pressure and temperature distortion effects, but a complex nonlinear relationship.

组合畸变对发动机稳定性的影响，不是压力畸变和温度畸变单独影响的简单相加，而是一种非常复杂的非线性关系。

Thermal decomposition and thermal stability of expanded ammonium nitrate were studied by accelerating rate calorimeter. Temperature, pressure and temperature rise versus time curves, decomposition pressure and temperature rise versus temperature curves were obtained respectively.

该文利用加速量热仪研究了膨化硝酸铵的热稳定性，得到了膨化硝酸铵的温度、压力和温升速率随时间的变化曲线以及温升速率、分解压力随温度的变化等曲线。

Inlet temperature distortion is one of the key factors effecting engine stability.

发动机进口温度畸变是影响发动机稳定性的关键因素之一。

Based on a large number of sample evaluation, the evaluation index of domestic thermal stability of heat transfer fluids has been formulated as the test temperature of the quality change rate at less than 10%.

在对大量样品评价的基础上，制定了我国热传导液热稳定性评价指标，即按照SH/T0680&1999进行试验，变质率不大于10%。

The test showed that the catalyst is featured by wide operation temperature range, high activity and good stability.

试验表明，该催化剂使用温度范围较宽，活性高，稳定性佳。

The emulsion polymerization stability varied with the concentration of initiator and reaction temperature, the optimum value of which are 0.5% ( wt) initiator and 60 ℃.

当引发剂用量为0.5%、聚合温度为60℃时，聚合的稳定性和转化率达到最佳；

Stability Assessment Test Technology of a Turbofan Engine Inlet Temperature Distortion

某型涡扇发动机进口温度畸变的稳定性评定试验技术研究

Through Comparative experiment under different conditions study on enzyme characteristics, such as: reaction optimum temperature, optimum pH, hot and acid-base stability.

通过不同条件下的活性对比实验，研究酶学特性，如：反应最适温度、最适pH、热酸碱稳定性等。

The optimum temperature, optimum pH, thermal stability and pH stability of complex enzyme produced by Fusarium oxysporum was Studied.

研究镰刀菌诱导产生的复合酶的最适温度、最适pH、热稳定性和pH稳定性。

Effect of pressure and temperature distortion on turbine engine stability

进气畸变对发动机压缩部件气动稳定性的影响