temperature stability的例句大全

Analysis of Dynamic Stability Test for HMA High Temperature Performance

沥青混合料动稳定度试验的分析

According to the shrink test for the pure cotton fabric, dacron with cotton mixture fabric and pure dacron fabric at different temperature, we have obtained the results that heating can affect the dimension's stability and analysed the reason

根据纯棉织物、涤/棉混纺织物、纯涤织物在不同温度下收缩的实验，说明加热对机织物尺寸稳定性的影响，并分析了影响原因

Microtherm stability is the ability fighting aspic when measuring coating to be used in microtherm. The design and experiment of a cryogenic heat pipe with a reservoir in room temperature

低温稳定性是衡量涂料在低温使用时的抗冻能力。使用常温气库的低温热管设计与实验

Immersion Marshall test, freeze-thaw splitting test and low temperature trabecular bending test results show that RA anti-rutting agent almost no effect to the water stability and low temperature performance of the asphalt mixture.

浸水马歇尔试验、冻融劈裂试验以及低温小梁弯曲试验的研究结果表明，沥青混合料的水稳定性、低温性能受RA抗车辙剂的影响很小。

We analyze the situation of WS2 high temperature lubricating grease in the high temperature using the approach of heating analyze proving that WS2 powder is of good stability and lubricity under high temperature condition.

采用热分析方法对WS2高温锂基脂在高温下的状态进行了分析，得出WS2粉末在800℃高温下具有良好的稳定性和润滑性。

We adopt a new one step method producing technology, add many kinds of addictive and produce a kind of WS2 high temperature lubricating grease with high dripping dot, good stability and excellent extreme pressure. There is no decreasing temperature process.

采用新型的一步法制备工艺，加上多种添加剂，制备出一种高滴点、具有良好稳定性和优秀极压性的WS2高温锂基润滑脂。

It has been tested that frequency stability of instrument developed reaches 1.74 × 10-9, temperature of laser tube is around 430C when frequency is stabilized, which achieves the anticipation.

仪器完成了设计、装调、运行任务，并对其频率稳定度进行了实测，频率稳定度指标为1.74×10-9，稳频时激光管温度在430C左右，达到了预期目标。

With regard to some abnormal situations in a complete set of start-up process, the paper presents the analysis of the feed water temperature and coal quality impacts on combustion stability.

在第二次启动中，通过投运2号高加以提高给水温度，使燃烧的稳定性得以提高。

To minish the effect of temperature change to the stability of DTG, the temperature expiation project was designed.

为了减小温度变化对动力调谐陀螺仪性能稳定性的影响，设计了温度补偿方案。

The evaluations of some influential factors such as swollen multiple, ability of absorbent water, temperature, brine, velocity of absorbent water, recovery ability, stability and anti-salt ability are conducted, and some important conclusions are drawn.

研究了吸水率、吸水速率、保水能力、热稳定性、抗盐性、耐酸性、收缩性、恢复性等指标对三大高吸水性树脂作了比较，得出了一些重要结论。

Because the global elevation of temperature causes permafrost to assume the degenerated tendency, permafrost area embankment thermal stability has received the widespread attention.

由于全球升温致使多年冻土呈退化趋势，多年冻土地区路基的热稳定性受到了广泛关注。

DSC results showed that the glass transition temperature of COL was 176 ° C, and thermal stability declined slightly comparing with BC. COL/ BC displayed a good thermal stability which could meet the sterilization requirements of biomedical materials at 121 ° C.

DSC结果显示，在176°C条件下出现了胶原的玻璃化转变，与BC相比稍有下降，但仍能满足生物医用材料121°C灭菌的要求，热稳定性能良好。

The results show that a reliable stability can be got by producing peanut milk with homogenizing and high temperature sterilizing, and adding 0.2% distillation glycerin monostearate, 0.12% CMC-Na into it.

结果表明：花生奶生产中使用0.2%的分子蒸馏单甘酯与0.12%的CMC－Na，工艺上采用均质，高温杀菌，可获得可靠的稳定效果。

However, when temperature gradients are collinear with the centrifugal force, conditional natural convection induced by gravity, centrifugal and Coriolis forces in porous medium will occur. Furthermore, gravity and Coriolis forces have no effect on the stability criterion of natural convection.

当离心力与温度梯度平行时，多孔介质中将发生离心力、重力与哥氏力共同驱动的有条件自然对流，并且重力与哥氏力对自然对流的稳定性判据均无影响。

But also inspects temperature, salt, PH and and high-speed centrifugal acceleration test the effect on the stability of the breasts of micro.

同时考察温度、盐、PH和和高速离心加速试验等对微乳稳定性的影响。

The result of comparative research with measure method of the grey melting point instrument and GX-high temperature material physical capability instrument indicated that the crucible method is the suitable method on representation and stability.

与灰熔点仪法和GX-高温物性测试仪法进行对比研究，表明在测定结果的稳定性和代表性方面，坩埚法是目前结晶器保护渣熔化速度测定的合适方法。

The gelatinization temperature, viscosity, and thermal stability of the milling gelatinized starch were analyzed through NDJ-8S viscosity meter.

采用数显粘度计（NDJ&8S）对微细化淀粉的糊特性进行了分析，主要分析了微细化后淀粉糊化温度、粘度、热稳定性的变化。

The system has high precision and stability, because the temperature property of break-over resistance of the multi channel analog switch is compensated momentarily, and the variation of platinum resistance that accompanies temperature change can influence the output of constant-current source.

因在线补偿模拟多路开关的通态电阻温度特性和温度变化时被测铂电阻的阻值变化对恒流源电流的影响，设计的温度测量系统精度高、稳定性好。

Based on fuzzy compensation decoupling control method, fuzzy control is used to decouple and compensate temperature control objects of the injection molding machine barrels, accuracy and stability of the temperature control of the injection molding machine barrels was improved.

基于上文中提出的模糊补偿解耦控制方法，利用模糊控制对注塑机料桶各段温度控制对象进行解耦和补偿，提高了温度控制的精度和稳定性。

Cold start temperature, thermal stability and tolerance to sulfur dioxide poisoning of the three way catalyst ( TWC) were tested on laboratory simulated emission control system.

在实验室模拟尾气配气系统上，对Pd/Na2O/K2O/γAl2O3三元催化剂的起燃温度、抗高温老化及抗SO2中毒能力进行了分析与评价。