tensile test的例句大全

Tensile test was carried out after tensile sample was heated to different temperature.

通过对试样加热后在热状态下进行拉伸，加热到不同温度下，钢材的屈服强度和抗拉强度有明显变化。

It was pointed out that in tensile test with specimen of C-grade casting steel, the load-halt method or the judgment from the pointer swing of strain instrument could not give clearly the yield point except the graphical analysis method.

指出测定C级钢拉伸试样屈服点时，用载荷停顿法或指针法，屈服现象不明显，只有图解法可一次测出未知屈服指标。

Analysis Of Fracture Shape Of Low-carbon Steel Tensile Test Sample

低碳钢拉伸试样断口形状分析

In this paper, the mechanical property parameters of the adhesive were gotten by tensile test on standard sample at first.

但由于种种因素，胶粘剂性能的理论研究仍然很不成熟。

After the castings of tensile specimen were all earmarked, a static tensile test was used to evaluate their tensile strength, 0.2% yield strength and elongation, refer to the ISO specification 9693.

⑶对拉伸试样的铸件进行标记后，参照ISO9693标准，采用静拉伸实验测试其拉伸强度、0.2%屈服强度以及拉伸率。

According to the processing performance titanium alloy materials, using a CNC machining center processing the tensile test specimen.

根据钛合金材料的加工工艺性能，采用数控加工中心加工出拉伸实验所用试件。

After 10 times anti-fatigue tensile test, recovery ratio of yarn would decline about 25%.

经10次抗疲劳拉伸试验丝线回弹性能下降25%左右。

Tensile Test of the Reinforcement in Flyash

粉煤灰中的筋条拉拔试验

This paper discusses the fracture shape of the tensile test sample in practice teaching of mechanics.

本文就力学实践教学中拉伸试样断口形状问题进行探讨。

The Microfracture Analysis of the tensile Test sample of the Heavy Section Ductile Cast Iron Cask

厚大断面球铁核容器拉伸试样断口显微分析

This paper analyses theoretically the relationship between the crosshead speed and the true strain rate in tensile test, thereby, suggests a testing method realizing the constant strain rate on a common tensile machine for investigating superplasticity of metals.

本文从理论上分析了拉伸试验中真应变速率与夹头移动速率之间的关系，提出一种在普通拉伸试验机上实现恒应变速率变形进行超塑性研究的方法。

Tensile test and surface layer effect of ultra fine grain thin copper sheet prepared by electrodeposition

电沉积法制备的超细晶薄铜板拉伸及表面层效应

The microstructure and linear superelasticity of 22% cold worked Ti-49. 8at% Ni alloy has been studied by tensile test at various temperature and TEM observation.

利用透射电镜观察不同温度下的拉伸试验，研究了冷变形量22%的Ti-49.8%Ni（原子分数）合金的显微组织及线性超弹性行为。

The analysis of physical mechanics about the necking and fracture in tensile test plate of low carbon steel

低碳钢拉伸试件的颈缩与断口的物理力学分析

In this paper the deformation behavior in tensile test of sheet metal samples is investigated, it provides the scientific basis and methods for precisely measuring the stamping property parameter δ_u of sheet metal.

研究了板材试样在拉伸中的变形行为，为准确鉴定板材冲压性能参数δu提供了科学依据与方法。

The biomechanical properties of eight human corneas from four normal Chinese fresh corpses were investigated by use of one dimension tensile test, tensile stress relaxation and creep test.

对正常国人6具新鲜尸体8个眼角膜标本进行单向拉伸实验和拉伸应力松弛、蠕变实验。

Tensile stress-strain tests and tear strength were test by AIPU ALJ-02 tensile testing machine. 4.

使用AIPU ALJ-02型双数显拉力试验机对其进行拉伸应力应变测试、撕裂强度测试。

Measuring tensile test strength, film forming, softening point, and then integrated taking into account the operating conditions, and laboratory factors, film-forming agent to finalize the selection.

通过试验测定其抗张强度、成膜性、软化点，再综合考虑到实验室的操作条件等各方面因素，最终确定成膜剂的选用。

The influence of secondary ageing on the mechanical properties of 7055 Al alloy was investigated on the basis of Vickers hardness measurement, tensile test and Kahn tear test.

利用维氏硬度和拉伸力学性能测试、Kahn撕裂试验等方法，研究二次时效对7055铝合金力学性能的影响。

Influencing Factors of Fracture Layered for Tensile Test Sample of High Strength Ship Plate Steel

高强度船体用结构钢拉伸试验样断口分层的影响因素