terminal cable的例句大全

Numerical simulation analysis of 220 kV cable terminal stress cone in force field

220kV电缆终端应力锥在力场中的数值模拟分析

The operation principle and structure features of a 220 kV cable terminal stress cone were simply described. The numerical simulation model of the cable terminal structure was proposed.

应用220kV电缆终端的结构型式和工作原理，建立了该种电缆终端结构的数值仿真模型；

Based on engineering condition, the stress distributions of the 220 kV cable terminal stress cones with 18-boundary conditions shaped different structure shapes and different type of rubber materials were calculated by nonlinear finite element method.

根据工程实际情况，由不同结构形式和橡胶材料组成了18种工况条件，并应用非线性有限元方法分别计算了各种工况下应力锥的应力分布。

It is the show that the influence of structure forms and rubber property on 220 kV cable terminal stress cone is very obviously. The suitable structure form and relatively rubber property should be chosen in engineering design.

结果表明：橡胶材料及其结构形式对220kV电缆终端应力锥应力分布的影响十分明显，实际工程设计中应选择适当的橡胶材料及相应的结构形式。

During development 220 kV cable terminal, the stress distribution of the rubber stress cone is the key problem.

在220kV交联电缆附件开发过程中，橡胶应力锥的压力分布状态是要解决的关键问题。

Optimization of material and structure parameters in cable terminal based on response surface methodology

基于响应表面法的电缆终端结构和材料参数优化

The Design and Development of the Terminal Unit of Temperature Monitoring System for Underground Cable Junctions

电缆接头温度监测系统终端装置的设计与实现

Effects of Cable Distance on the Terminal Voltage of Motor Fed by PWM Inverter

电缆长度对PWM逆变器驱动电机端电压的影响

The Influence and Solution of Long Island Under-sea Cable Gentle Breeze Electric Field to Terminal Voltage

长岛海缆和风电场对末端电压的影响与解决方案

From the results of comparison and analysis, suggestions for structure shape and type of rubber materials are presented to helpfully design the cable terminal.

提出了结构形式和橡胶材料的选用建议，为实际设计提供参考。

Large Cap/ Cable Chamber with Terminal Board for lead connections.

配置端子板的大型防护罩和电缆盒，用于电源的连接。

Terminal Board cable connection for quick replacement of the cap/ cable assembly

接线端子板的电缆连接方式，便于电缆的迅速装配和更换

All conductor leads shall terminate at a terminal board that is permanently cast into the epoxy-sealed cable entry area.

所有导体接头都应该连接在接线端子板上，并采用环氧树脂永久密封在电缆进入区。

In the paper, the different theoretical bases for the two kinds of safety protective mode i. e. jumper cable and insulated flange and the developing trend were expounded, the opinions for improving the internal petroleum terminal were raised.

阐述跨接电缆和绝缘法兰两种安全防护方式的不同理论基础和发展趋势，并介绍了绝缘法兰和绝缘软管在钢质码头以及混凝土和木质码头上的使用方法。

Design and Implementation of Adapter in Cable Modem Terminal System Network Management System

CMTS网管系统适配器的设计与实现

Apply a thin coating of petroleum jelly or chassis grease to the exposed surfaces of the battery cable terminal clamps and the battery terminal posts.

在电池电缆端子夹和电池端子线柱上涂一层薄薄的石油胶或底盘润滑油。

Apply a thin coating of petroleum jelly or chassis grease to the exposed surfaces of the cable terminal clamps and the battery terminal posts. A columnists on its pedestal. having columns either at both ends or at both sides.

为电缆终端线夹和电池接线柱露出部分涂一层薄的凡士林油或车用底盘滑脂。

The cable feeding is made from below, a necessary installation area underneath the terminal strip is provided.

电缆供给在控制面板下面，在接线条的下面应提供必要的安装区域。

Connectors, Backshells , Terminal Block , Cable Support, Contacts, Wire , Conduits, Circuit Breakers, Relays, Switches, Tools, Other.

连接器 、 后盖 、 接线盒 、 电缆支撑系统 、 接触 、 电线 、 导管 、 断路开关 、 继电器 、 开关 、 工具以及其它.

The terminal fittings on the cable are standard bearing sockets.

钢索的端部连接采用标准承压锚杯.