test point的例句大全

Finally the article puts forward software test frame with practical significance from engineering point of view, and gives a mathematical proof for.

最后从工程角度提出了有现实意义的软件测试框架，并从数学上证明了该框架的有效性。

You learned about the basic Boost checks, pattern matching, floating point comparison, custom checks, test suite organization both manual and automatic and fixtures.

讨论了基本的Boost检查、模式匹配、浮点比较、定制检查、测试套件的组织（包括手工和自动）和装备。

Test of Impact force by using two-point strain Measuring Method

两点应变测量法测试冲击力

The universal material testing machine is used to test material and get its performance, the control system is the key point of the machine.

万能材料试验机是实现材料性能测试的工具，测控系统是其关键。

After initial coarse alignment and reaching a position-known point, azimuth error is compensated based on the DR algorithm and the similarity theory. Finally the field-test verifies the alignment algorithms.

在载车初始粗对准之后，行驶一段路程到达一位置已知点，由航位推算结果并运用相似性原理求出初始粗对准的航向误差角，从而修正航向角达到精对准的目的。

The glass transition temperature Tg, melt point Tm, thermogravimetric curve, tensile strength and degradation rate of this blend were determined by DSC, TGA, tensile test and degradation test.

用差示扫描量热法、热重分析法和拉伸试验法等测定了CDA&PLLGA的玻璃化温度、熔点、热失重性能、拉伸强度和降解性能。

A good test engineer has a'test to break'attitude, an ability to take the point of view of the customer, a strong desire for quality, and an attention to detail.

一个好的测试工程师要有“测试到底”的精神，站在用户的立场，追求高质量软件的强烈愿望和注意细小环节的能力。

The slip between the threaded rod and concrete is little in the three-point bending test, indicating that the selected threaded rod and the torque applied to the nut before loading are acceptable in practical applications.

在加载过程中，螺杆与混凝土之间的相对滑移量很小，因此在拉拔试验中选择的螺杆以及施加于螺母的扭矩在实际工程中是适用的。

Probability test on point position droping into error ellipse

点位落入误差椭圆的概率检验

Biomechanical characteristics of femur were measured by three point bending test.

三点弯曲试验法测定骨生物力学；

Use the classical bridge method to test the position of the insulated fault point, adopt high voltage and high performance electronic amplifier to substitute galvanometer extend the measuring range of the insulation resistance to 10M Ω.

利用经典电桥法对电缆绝缘故障点位置进行测定，采用高电压、高性能电子放大器代替检流计使测量范围延伸到高达10MΩ的绝缘故障测量。

The biomechanical properties of the healing radius were analyzed by a three point bending test.

桡骨的生物力学性能由三点弯曲实验所得的结果进行分析；

A special machine with scanning electron microscope ( SEM) used was designed for three point bending test.

设计了一种可用扫描电镜（SEM）动态观察、专门用于三点弯曲试验的特殊装置。

Mechanical properties were valued by high-temperature compress test, three point bending test and Vicker hardness test.

通过高温压缩试验、三点弯曲试验、显微维氏硬度试验等评价合金的机械性能。

The influence of static thermal degradation on colloidal performance of Lithium-Calcium base grease was studied by the centrifugal oil separation test, dropping point test and acid number test.

利用离心分油试验机、油浴滴点测定仪和酸碱滴定仪分别考察了静态热老化对锂-钙基润滑脂胶体性能的影响。

And three point bending test was made on 10 screws with hollow lateral holes and 10 massive screws, respectively.

10个空心侧孔螺钉和10个实心螺钉分别做三点弯屈（3pBend）试验。

A photoelectric probe of measuring system to test the burst point distance of fuze behind target

引信靶后炸点距离测试仪光电探头的研制

A new X-ray diffraction topographic method was developed and used to study the fracture morphology and process in three point bending test of Mo single crystals.

本文提出一种新的X射线形貌法，并利用它观察三点弯曲Mo单晶的断口特征及其断裂过程。

The Improvement of Direct Test Controller and Test Experiment in Multi-Point Testing

多点测试中直接测试控制器改进与实验

In this paper, the stress induced resistance changes in iodine doped and undoped carbon nanotube films were investigated by a three point bending test.

利用三点弯曲法研究了掺杂和末掺杂碳纳米管薄膜应力诱导电阻的变化。