thermal difference的例句大全

Due to the thermal expansion difference for both of the Y-123 bulk and Y-211 particles the micro-cracks in the bulk interior were consequently brought about, which might result in the bulk levitation force degradation observed in our experiments.

由于Y123粒子和Y211粒子热膨胀系数存在差异，这种不均匀性导致了块材内部产生微裂纹，从而降低了磁悬浮力。

The Application of Differential Thermal and Thermo-gravimetric Difference Analysis to Mineral Identification

矿物热重差分析的应用

Thermal expansion coefficient difference and lattice mismatch caused by heteroepitaxial would significantly reduce the quality of GaN films.

异质外延所产生的热膨胀系数差别和晶格失配会大大降低GaN薄膜质量。

When thermal shock temperature difference is higher, Fe-Al phase improves the thermal shock resistance of Fe-Al/ Al 2O 3 composites.

在热震温差很高时，Fe-Al相的高温热强性改善了Fe-Al/Al2O3复合材料的抗热震性。

However, cavities are prone to formatting at the Si/ SiC interface due to the large lattice mismatch and thermal expansion coefficient difference between Si and SiC.

但由于Si和SiC的晶格常数及热膨胀系数的不匹配，在SiC／Si界面处易形成空洞缺陷。

Both the dynamic effects of the difference of surface roughnesses and the thermal effects of difference of surface temperatures between land and water body result in the change of the flow over the inland water body.

一般天气条件下，过水体气流流场，受水陆粗糙度差异的动力作用和水陆热力差异的局地风共同作用。

The results show that the critical thermal shock temperature difference of Fe Al/ Al 2O 3 composites is about 800 ℃, and the compression of the thermal shocked composites was characterized of its thermal shock resistance.

结果表明Fe Al Al2O3复合材料的临界热震温差在800℃左右，抗压强度可以较好地反映材料的抗热震性。

Objective: To study the thermal distribution of US-guided implanted microwave and its distribution under difference parameters.

目的：探讨超声引导下植入式微波热场的空间分布及其不同参数条件下的变化规律。

Thermal engine is the drive-device of AUV driven by temperature difference energy.

热机是温差能驱动水下监测平台的动力装置。

Combining the thermal engine which driven by the temperature difference energy with mechanical design and control system deign, the underwater glider is developed.

结合能够把水域温差能转变为机械能的热机设计以及滑翔器的主要机械结构和控制硬件系统设计，完成了滑翔器的初步设计与开发。

The equivalent force caused by temperature field of plate are presented in structural analysis. The thermal flexure are caused by difference temperature along plate thickness. Numerical examples prove the accuracy of thermal flexure calculation. 3.

在热变形计算时，本文推导了板壳温度场导致的等效温度载荷，其中板厚方向的温差将引起板的热弯曲，数值算例表明了热弯曲计算的准确性。

According to the difference of heat source, thermal stress forming is divided into plate forming by line heating, laser forming and plate forming by high frequency induction heating.

热应力成形是一种通过不均匀加热产生的热应力来使板料成形的方法，与传统成形工艺相比具有显著优势。

The effect of nickel sulfide on glass quality was described and the difference between thermal homogenizing tempered glass and thermal toughened glass was also discussed in this article.

简述了硫化镍杂质对玻璃的影响，讨论了热均质钢化玻璃和热增强玻璃的差异，同时指出了玻璃工业必须和建筑设计师共享玻璃方面的知识和各种解决方案。

The difference measuring method of the thermal units' resistance on the thermal printing head

热印头发热元件阻值一致性的差值测试法

Using this equation and the soil albedo image and the soil temperature difference image, a soil thermal inertia image was obtained.

借助此回归方程和所生成的土壤反照率图和土壤温差图可以生成真实土壤热惯量图。

The article discussed thermal aging rule of insulating material of power capacitor and the difference between thermal character and aging.

对电力电容器用绝缘材料的热老化规律，以及它与热性能的区别进行了讨论。

The calculation analysis showed that, there was no linear relationship between thermal loss efficiency of vacuum tube and the ambient temperature difference, and the result of thermal loss efficiency could be closer to the actual according to the ambient temperature partition;

计算分析表明，真空管热损系数与吸热管和环境温差并非线性关系，将其关联式按环境温度分段整理将使计算结果更接近实际；

A thermal measurement model based on enthalpy difference is deduced and the hot water density and enthalpy formulas are compensated and predigested.

本文详细推导了以热焓差值法为基础的热量测量模型，对热水密度和焓值计算作了简化和补偿，提高了热量积算的精度。

The difference between microwave irradiation polymerization and conventional thermal polymerization was investigated;

考察了其与常规热聚合的差异；

Finite Difference Method for Thermal Analysis of Femtosecond-Picosecond Pulse Laser Ablation on Metal Surface

飞秒、皮秒激光烧蚀金属表面的有限差分热分析