thermal engine的例句大全

In this thesis, it takes the cooling system item of a six-cylinder direct injection diesel engine as the research background. The author researched cooling water jacket with CFD method and simulated the temperature field of cylinder head by thermal boundary conditions which obtained from the calculation.

本文以一台六缸直喷式柴油机冷却系统项目为研究背景，应用CFD分析方法研究缸盖冷却水套；并利用仿真计算获得热边界条件，进行缸盖温度场模拟。

The results show the highest indicated thermal efficiency of engine with different octane number appears in the area of high EGR rate and high fuel/ air ratios, which is near the knocking boundary.

不同辛烷值燃料最高指示热效率出现在高EGR率、混合气较浓的区域，并且靠近爆震燃烧边界，辛烷值为60的燃料最高指示热效率最高，并且覆盖的工况区域最宽。

In chapter III, the influence of the heat reservoir boundary on the thermodynamic property of a thermal Brownian heat engine in a periodic single-barrier sawtooth is analyzed.

在第三章中，研究了温库边界对单势垒锯齿势中布朗热机热力学性能的影响。

Analysis of Thermal Boundary Condition and FEA Calculation of Temperature Field for the Exhaust Valve of Diesel Engine

排气阀热边界条件分析及温度场有限元计算

The cooling technology using the physical and chemical heat sink of hydrocarbon fuel provides the best means for the thermal management of engine system and the body of advanced aircraft.

利用碳氢燃料的物理和化学热沉对高超音速飞行器的发动机等高温部件进行冷却是目前最可行的方法。

The Development of the Torpedo Thermal Power Engine and the Selection of the Engine Model

鱼雷热力发动机发展概况及选型研究

Structural Vibration Modal Analysis of Torpedo Thermal Power Engine

鱼雷热动力发动机机体振动模态分析

The foreign development of torpedo thermal power engine, and the basis and outlook for choosing the engine model are discussed.

论述了国外鱼雷热力发动机发展概况以及鱼雷热力发动机选型的依据和发展趋势。

Numerical simulation of thermal loads for engine exhaust manifold

发动机排气歧管热负荷数值模拟

The temperature field computation of engine cabin is to obtain the temperature change law according to thermal regime of engine in.

针对发动机舱的特殊性，提出了具有高速气流流动防护区的通风补偿计算方法与管网设计准则。

Simultaneously impacts on thermal loads of engine parts result from altitude, the average temperature of gas and the heat transfer coefficient are considered.

本文对起飞工况和最大续航工况下的发动机零件进行了热负荷对比分析，同时考虑了海拔高度、燃气平均温度和换热系数对发动机零件的热负荷影响。

EXPERIMENTAL RESEARCH ON COMBUSTION CHARACTERISTICS OF THERMAL CRACKING BIOGAS ENGINE Pilot scale study on direct synthesis of dimethyl-ether from biomass synthesis gas

热裂解生物质气发动机燃烧特性试验

This process is not the circulation itself but also the thermal cycle of the pure heat engine.

这不仅是环流的过程，同时也是作为纯粹自然热机的热力循环过程。

Because the inside work processing of engine is very complex, and the influence factor are numerous, the heat transfer and thermal load inside engine are primarily investigated by means of experiment.

由于发动机内工作过程非常复杂、影响因素众多，对发动机内传热及热负荷的研究目前主要还是采用实验测试的方法。

Ceramic Thermal Barrier Coating for Adiabatic Diesel Engine

无水冷柴油机陶瓷隔热涂层

This paper compares and analyzes the effect of cylinder diameter enlarging or turbocharging in a same type diesel engine on the combustion organization, working process, mechanical load, thermal load and engine performance.

本文对比分析了在现有机型上采用扩缸和增压方法对柴油机燃烧组织、工作过程、机械负荷与热负荷以及整机性能的影响。

A temperature distortion generator burning hydrogen in front of engine inlet produces thermal disturbance.

热扰动是由安装在发动机进口前的氢燃烧温度畸变发生器产生的。

The temperature field computation of engine cabin is to obtain the temperature change law according to thermal regime of engine in and out and heat control measure. It can provide reliable theory gist for the majorization project of control and cooling.

发动机舱温度场的计算是根据发动机内外热状况及热控制措施来确定发动机舱各部分的温度变化规律，为控制及冷却方案的优化提供可靠的理论依据。

Study on Thermal Equilibrium of Cooling System of Construction Machinery Diesel Engine under Transient Conditions

工程机械柴油机动态工况冷却系统热平衡研究

Coupling Thermal Stress Analysis of Engine Cylinder Head

发动机缸盖耦合热应力分析