thermal etching的例句大全

The comparison shows that the thermal etching carried out at a temperature lower than the sintering temperature can obviously reveal the grain structure of Al_2O_3 matrix. The metallic particles after thermal etching were not moved away from the samples, as normally occurred in chemical etching.

比较表明，在低于烧结温度约150℃下进行的热腐蚀能够清晰地揭示基质Al2O3的晶粒结构，并且与化学的效果不同，保留了金属相粒子。

The grain boundary energy was measured with thermal etching method.

用热蚀刻方法测量了合金的晶界能。

The direct reasons that result in visible damage are the stress explosion in the bulk and the thermal melting, thermal etching and plasma emission on the surface.

造成宏观破坏的原因在体内是应力炸裂，在表面是热烧蚀热熔化和等离子体抛射。

The Graphic Input for a Laser-Induced Thermal Etching System

激光蚀刻、书写中的图形输入方法研究

The Research on Corrosion Behavior of Dental Alloys in Common Use by Electrochemical Method; thermal etching

牙科常用合金腐蚀性能的电化学研究热腐蚀；热浸蚀；热力学侵蚀；热蚀；热蚀法

Heat Transfer and Ablation of Insulation in Second Combustion Chamber with Different Configuration in SRR thermal etching

不同构型固冲发动机补燃室绝热层传热烧蚀热腐蚀；热浸蚀；热力学侵蚀；热蚀；热蚀法

Influence of Slope and Rainfall Intensity on Runoff and Erosion Hydraulic Characteristics on Grassed Roadways thermal etching

坡度与降雨强度对植物路路面侵蚀动力参数的影响热腐蚀；热浸蚀；热力学侵蚀；热蚀；热蚀法

Thermal etching The technology and condition of extraction were studied in this paper, of which hot water extraction was used to extract polysaccharide from edible fungi.

热腐蚀；热浸蚀；热力学侵蚀；热蚀；热蚀法主要讨论了热水浸提法提取菌多糖的工艺流程及工艺条件。

The erosion of GD type steel fibre in industrial phosph-acid has been tested by the electrochemistry and thermal etching testing.

利用电化学方法、热腐蚀试验等研究了GD型钢纤维在工业磷酸中的腐蚀行为。

The result indicates that there are obvious differences between CO2 and CH4 gas reservoirs on value of thermal etching carbonate, fluorescence spectrum and CO2 gas content in Huagou area.

结果表明，花沟地区的CO2气和CH4气具有不同的地球化学指标组合异常特征，在热蚀碳酸盐、荧光光谱及CO2气含量等指标上有明显的差异。

Reactive Ion Beam Etching and Thermal Effect

反应离子束蚀刻中温度效应的研究

The fabrications of glass microfluidic chips by using photolithograph, wet etching and thermal bonding methods and PMMA microfluidic chip by hot embossing and direct bonding methods were studied.

采用热压和键合的方法制作玻璃和有机聚合物（PMMA）芯片，对玻璃和PMMA芯片在高压直流电场作用下的伏安特性进行了研究和分析。

Influence of Thermal Ammonia Etching on the Nano-structure of Iron Films on Si Substrate

高温氨刻蚀对硅基纳米铁薄膜显微形态的影响

This work includes the separation of particles, disposing of the particle sample on the surface of nuclear track detector, irradiation of the sample by thermal neutrons and chemical etching, selection of uranium particles and so on.

研究内容包括擦拭样品与载体分离、样品在裂变径迹片上沉积、样品辐照以及化学刻蚀、铀微粒筛选等。

Plenty of oxidation etching pits are found on the surface of the specimen after the thermal fatigue test, and the surface principal crack is prone to propagate through these etching pits.

实验结果发现，试样表面出现大量的氧化腐蚀坑，表面主裂纹优先通过这些腐蚀坑扩展。

Study of Infrared Thermal Image in Process of Wet Etching

湿法腐蚀进程的红外热像学研究

The Si micro bridge was fabricated by wet chemical etching technique in order to get good infrared thermal imaging system with ferroelectric thin films.

为了制备高性能铁电薄膜红外探测器，对Si微桥的湿化学腐蚀工艺进行了研究。

The major experimental conclusions include: The temperature distribution and heat diffuse of solution can be truly reflected by infrared thermal image, which is valuable for the analysis of thermal circumstance of laser assisted etching;

主要实验结论包括：红外灰度图可真实反映溶液的温度分布和热对流情况，为激光化学刻蚀的热环境分析提供有价值的红外监测数据；

Wet etching of dry thermal SiO_2 with buffered hydrofluoride acid

干氧SiO2的氢氟酸缓冲腐蚀研究