thermal model的例句大全

In the infrared laser to stimulate biological cell sodium channel subject to change its channel function, we have established the heat-transfer-model with the thermal interaction between laser and biological cells.

在研究红外激光刺激生物细胞钠离子通道而改变其通道功能的课题中，我们建立了一个红外脉冲激光刺激作用下，激光与生物细胞的热相互作用的热传递模型。

Numerical simulation shows that the laser-tissue thermal interaction model has two stages: the initial non-steady stage and the succeeding quasi-steady stage with the characteristic of constant parameters such as interface temperature, interface moving rate and carbonization zone etc.

数值模拟表明，该光热作用过程分为两个不同阶段：起初的非稳态阶段以及紧接着的准稳态阶段，此时相间边界温度、相间边界移动速度以及碳化层的厚度均为与时间无关的常数。

Considering the heterogeneous thermal properties of living tissues, a multilayer heat transfer model for laser tissue thermal interaction is presented in this paper.

考虑生物组织的热物性非均匀性，建立激光与生物组织热相互作用的多层结构模型，探讨无相变时生物组织中的热量传递规律。

On the basis of heat transfer function, the mathematical model of thermal conductivity inversion by full-field temperature information is deduced, and the feasibility of thermal conductivity inversion during welding is proved.

由传热学基本方程，推导出了由温度场全场信息反演热传导系数的数学模型，证明了焊接过程热传导系数反演法的可行性。

On the basis of the first chapter, an appropriate mathematical model of thermal wastewater jet was established by comparing advantages and shortcomings of different models and combining actual conditions.

在本文第一章的基础上，通过综合比较各模型的优缺点，结合实际条件，建立了合适的热废水射流的数学模型，并列举了几种通用的控制离散方法；

The K-ε model of turbulent for thermal water buoyant jet from single rectangular port in crosswise flow

横流中单矩形孔热水浮射流的K-ε模型

In this paper, the theory model of running the subway air-conditioning system based on VAV technology was established, the couple problem of temperature and RH in platform and station hall would be solved and the thermal comfort level would not be influenced at the same time.

本文在变风量调节的基础上，建立了按相对热指标来调节运行地铁中央空调系统的理论模型，在满足人体舒适性要求的前提下，解决了站台和站厅温湿度耦合问题。

Research the Model of Predicting the Thermal Expansion Coefficient of Particle-reinforced Composites

颗粒增强复合材料热膨胀系数预测模型的研究

Simulative analysis on thermal load of piston based on parameterized finite element model

基于参数化有限元模型的活塞热负荷仿真分析

The effects of convective thermal losses on the thermal behavior of thin metal films, as described by the microscopic hyperbolic two-step heat conduction model, are investigated based on the condition that the duration of heating source is much less than the duration of the thermalization process.

在激光热源加热时间远小于达到热平衡所需时间的条件下，研究了对流热损失对金属薄膜热行为的影响。

The GMAW welding thermal process for low alloy steel JG590 was analyzed based on the established heat source model.

将熔化极气体保护焊（GMAW）的热输入处理为三维移动串热源，建立了串热源模型，模拟了JG590低合金钢的GMAW焊接热过程。

This paper presents a state space model based on spindle rotation speed for thermal errors of machine tool.

本文提出了一种基于主轴转速的机床热误差状态方程模型。

Collecting all the phase line into one image, the thermal map of the phase transition was obtained and the change of thermal map in the surface was the heat flow distribution of the test model.

把所有的相变线位置汇集到一张图上，绘制出相变过程的热图谱，其中热图谱的变化情况为试验物表面的热流分布情况。

The paper cited a model between ventilation and thermal mass.

本文引用了一个通风与蓄热的耦合模型。

A thermal measurement model based on enthalpy difference is deduced and the hot water density and enthalpy formulas are compensated and predigested.

本文详细推导了以热焓差值法为基础的热量测量模型，对热水密度和焓值计算作了简化和补偿，提高了热量积算的精度。

Results were consistent with the literature on thermal measurement value, which indicated that the calculation model had good prediction ability, and could provide certain guidance for the improvement and optimization of the actual operation process of rotary kiln production systems.

计算值与文献热工测量值相吻合，说明该计算模型具有较好的预测能力，可以为改进和优化回转窑生产工艺的操作流程提供一定指导作用。

Through model tests, practical systemic thermal measurement and back calculation of various hidden parameters, the the flow patterns of gas and solidphases in DD calciner for 2 000 t/ d and its thermal performances were synthetically studied.

通过冷态模型试验、实际预分解窑系统的热工检测及各种隐参数的反求计算，对耀县水泥厂2000t/dDD分解炉的气固两相运动规律及性能特点进行了综合研究与分析评价。

Methods The model of facial chronic inflammatory pain was established by hypodermic injection of turpentine oil according to the method of Neumann ( 1996). The pain threshold of facial skin was measured once a day for 15 days using a thermal measurement apparatus of pain.

方法参照Neumann（1996）报道的研究方法，采用大鼠面部皮下注射松节油建立慢性炎症痛模型，用热测痛的方法测定面部皮肤的痛阈值，每天一次，连续测15d。

After discussing flow behaviors of polymers near the glass transition temperature, the mathematical model of heat transmission through thermal medium and the mathematical model of pressure distribution within polymer were studied.

在分析塑料玻璃化温度附近的流变行为基础上，研究了微通道热压过程中的材料传热数学模型、应力场分布数学模型。

The experiment validation of the dynamic simulation model for 3 dimensions thermal network of medium temperature solar collector system

中温太阳集热器系统热状态特性数值模拟的三维动态热网络实验验证