thermal pipe的例句大全

Development of General Thermal Design Software for Heat Pipe Exchanger

热管换热器通用热力设计软件包的开发

Reducing the thermal deformation of machine tools by circular heat pipe

用环形热管减少机床的热变形

Effect of wall heat conduction on fluid thermal boundary conditions in laminar pipe flows

管壁导热对管内流动流体热边界条件的影响

Low efficiency, disorders of the hydraulic and thermal conditions, too large energy consumption of the pipe network and other issues the district heating business facing have been researched in this paper.

本文针对集中供热事业所面临的低效率运行、水力及热力工况失调、管网能耗过大等问题进行了相关研究。

By using corrugated pipe bundle instead of the bare pipe bundle with the same stiffness as its tube sheet, the axial thermal compensation can be increased by 40.4 percent, and the corresponding pulling-out force is 53.2 percent of that of the bare pipe bundle.

在光管管束与壳体等刚度条件下，用波节管管束代替光管管束，轴向热补偿量可提高404%，相应的拉脱力为光管管束的532%。

The research on temperature measurement of thermal anomaly of oil-piping

输油管道热异常温度测试研究

Effects of pipe cooling on thermal stresses in the ship lock concrete base slab in the Changjiang Gorges

水管冷却对三峡船闸混凝土底板温度应力的影响

Cause of Oven Pipe Explosion Cracking in Steam Boiler for Thick Oil Thermal Production and Measures

稠油热采蒸汽锅炉炉管爆裂原因分析及对策

Compensation and design for directly embedded prefabricated high temperature thermal insulation pipe

直埋式预制高温保温管道的热补偿和设计

Workshop Production and Construction of a New Type of Compound Anti-corrosion and Thermal Insulation Pipe

一种新型复合式防腐保温管道的预制及施工

In this paper, the formulation and processing technology for CPVC thermal conductivity pipe produced by single screw extruder were investigated.

本文研究了适用于单螺杆挤出的氯化聚氯乙烯（CPVC）导热管的配方和工艺条件。

Thermal expansion pipe, CS type ware, it is by the expansion set, pressure plate and telescopic combination to body.

热力管道伸缩器型号CS型，它是由伸缩套、压盘和伸缩体组合而成。

FRV thermal insulation pipe bracket.

FRU隔热管托。

Were compared. In addi-tion, the installation method for the thermal insulation pipe brackets are introduced in the article.

另外，对隔热管托的安装方法也作了简介。

The article introduces the superiority of direct-hidn thermal insulation pipe, and comparison, analysis, probe are performed for different quality of thermal insulation pipe.

介绍了直埋保温管的优越性，并对不同材质的保温管进行比较、分析、探讨。

Hydraulic strength, demolition strength, and weldability of the thermal conductive pipe prepared by HDPE/ POE/ graphite composites were studied.

研究了HDPE/弹性体/石墨复合材料制作的导热塑料盘管的静液压强度、液压爆破试验和可焊接性。

Effective solutions are proposed for the selection of independent circuit, calculation of density for varying water temperature, calculation of thermal pressure and simulation of pump characteristic curve in numerical simulation of pipe networks.

对管网数值仿真中独立回路的选择、水温变化时密度的计算、热压的计算、水泵特性曲线的模拟等均提出了有效的解决方法。

By making the simulation of cooling and heating mode, the change rules of the soil temperature with the radial direction, the change rules of the exit water temperature of the buried pipe and the thermal influencing radius in the vertical multi-pipe were obtained.

通过对制冷和制热工况的模拟，得到土壤温度沿径向的变化规律、埋管出水温度的变化规律及埋管的热作用半径的变化规律。

Therefore, heat pipe receiver can improve the efficiency of system, avoid the phenomena of heat spot and thermal ratcheting.

因此，热管吸热器提高了系统的效率，能避免热斑和热松脱现象。

The main dimensionless parameters that influence the homogeneity of the fluid thermal boundary conditions are Peclet number, the wall to fluid thermal conductivity ratio, the heating/ cooling length radius ratio and the wall thickness radius ratio of testing pipe.

影响这种不均匀性的主要因素是Peclet数、管壁材料的相对导热系数、实验段相对加热长度及管壁相对厚度等无量纲参数。