thermoplastic的例句大全

Preparation and Properties of Dynamically Vulcanized Flame Retardant PP/ EPDM Thermoplastic Elastomers

PP/EPDM热塑性弹性体动态硫化阻燃材料制备及性能研究

Preparation of sbr/ br/ ldpe thermoplastic elastomers by dynamic vulcanization

动态硫化SBR/BR/LDPE共混型热塑性弹性体的制备

Morphology of segmented polyether poly ( urethane ester) thermoplastic elastomers

嵌段聚醚聚氨酯－酯热塑性弹性体的形态与结构

The industrial development of SBS thermoplastic elastomers& ⅰ. synthesis and properties of SBS thermoplastic elastomers

热塑性弹性体SBS的工业开发&Ⅰ.SBS的合成与质量

Reactive extrusion dynamic vulcanization of thermoplastic elastomers

热塑性弹性体的反应挤出动态硫化

The thermoplastic elastomers from CR/ HPVC blend with excellent mechanical properties were prepared by dynamically curing.

选用氯丁橡胶（CR）和高聚合度聚氯乙烯（HPVC）为主体材料，用动态硫化法制备了一类性能优异的材料&CR/HPVC共混型热塑性弹性体（TPE）。

Tribological Properties of Thermoplastic Elastomers SEBS/ Talc Blends

SEBS热塑性弹性体/滑石粉共混物的摩擦磨损性能研究

The virtual needle points are located. Then data is located to the thermoplastic elastomer film and marked by 3d laser tracking.

通过标记平面对入钉点和虚拟出钉点进行空间定位，然后将得到的数据用三维激光定位仪定位到热塑膜上并标记。

Biodegradability and Applicability of Thermoplastic Starch Biodegradable Mulching Film LDPE HDPE sheet bag

热塑淀粉Mater-Bi可生物降解地膜的适用性与降解性能研究高低密度聚乙烯薄膜及薄膜袋

Meanwhile, those of the black PEEK composite were 0 21 and 0 61 × 10-6 mm 3/ ( N · m) respectively The wear of the black PEEK composite was controlled mostly by adhesive mechanism and going with thermoplastic flow

黑色PEEK复合材料的摩擦系数为021，比磨损率为061×10-6mm3/（N·m），两种复合材料主要受粘着磨损机制控制，并伴有热塑性流动磨损

The results show that the thermoplastic sheets and the flow molded parts have superior mechanical properties, that is, tensile strength, flexural strength, modulus and impact strength are greater than 60 MPa, 100 MPa, 3 500 MPa and 50 kJ/ m2 respectively.

结果表明：三种热塑性复合材料片材与制品具有优异的力学性能，拉伸强度、弯曲强度、模量和冲击强度分别大于60MPa、100MPa、3500MPa和50kJ／m2，热变形温度158℃左右。

Thermoplastic Shear Instability of Corrosion-Resisting Metals in Cutting Process

耐蚀金属材料在切削过程中的热塑剪切失稳

The cutting force and the thermoplastic shear instability can directly influence on machining precision, tool life and surface roughness.

在加工中切削力的变化和热塑剪切失稳的发生将直接影响加工精度、刀具磨损和表面质量。

Single-core power cable with thermoplastic polyethylene insulation

热塑聚乙烯绝缘单芯电力电缆

The wing was made from a thermoplastic material using a STRATASYS 3D printer.

这机翼是用一种使用了stratasys的3d打印机的热塑性材料制成的。

Realization of Optimum Control System of Thermoplastic Material Production Run Based on Genetic Arithmetic

基于遗传算法的热塑材料生产过程优化控制系统的实现

In this study, etherification reaction was applied to modify rice straw into a thermoplastic material.

本研究利用醚化反应对稻草进行化学改性，使其转化为具有一定热塑性的高分子材料。

The dose attenuation rate was less than 2.57% because of the thermoplastic material fixing cage.

在通过热记忆膜固定罩后，剂量衰减率≤2.57%。

Polycarbonate ( PC) is a kind of thermoplastic material with good properties, and its products are widely used.

聚碳酸酯（Polycarbonate，简称PC）是一种综合性能优良的热塑性工程材料，制品广泛地应用于各个领域。

The results show that the intrinsic fiber strength and fiber length can be protected relative completely by thermoplastic material plates beating.

结果表明：采用塑性材质磨盘打浆能使纤维本身固有强度和长度得到较好的保护，同时又能使纤维产生良好的内、外部细纤维化。