thin paper的例句大全

This paper proposes an experimental method to measure the focal length of a thin lens by using a resistance thread according to electricity principle.

本文提供了一种用电学原理在一根电阻丝上测量薄透镜焦距的实验方法。

Convection features in a thin liquid layer with heating sources is studied in the present paper.

研究一个液体薄层在热源作用下的流动特征。

An analysis method based on experiment on support structure and initiative adjust of super thin reflect mirror is set forth in this paper.

采用有限元法，针对一种实验超薄反射镜支撑方案及其主动调节进行分析，旨在为支撑方案和调节方案找到一条合理的路径。

The similarities and differences between matrix theory and non-matrix theory are analyzed, and in accordance with the matrix theory, foundation of mechanical analysis on rotating thin shell and finite element method for internal forces of tower tube are discussed in the paper.

分析了有矩理论与无矩理论的异同点，并根据有矩理论，总结了旋转薄壳体的力学分析基础和塔筒内力的有限单元法。

In this paper, the static shape control of the flexible intelligent thin shell structure is derived by the intelligent thin shell element of Ref. [ 5]. Finally, a numerical example of a paraboloid antenna is given.

应用文献[5]给出的三维智能薄壳单元研究了柔性薄壳智能结构的静态形状控制问题，给出了抛物面形天线的静态形状控制算例。

Static analysis of space thin shell structure is presented in this paper.

本文针对锥形单管塔这种空间薄壳结构进行了静力分析。

Under the consideration of process requirement and fabrication condition, the design scheme for thin shell structure has been given in this paper.

在保证工艺要求及满足加工条件的前提下，给出了薄壳流道结构的设计方案。

In this paper, aimed at minimizing the whole strain energy of thin shell structure, the model of shape optimization and the topology optimization were built up. The feasible solutions to shape optimization and topology optimization have been found.

以薄壳结构整体应变能最小为目标，建立了薄壳屋盖的形状优化与拓扑优化模型，并提出了薄壳屋盖形状优化与拓扑优化的的求解方法。

Simulations using numerically calculated scattering response based on three thin wire target demonstrate that the method proposed in this paper is surprier to the traditional E-pulse.

基于三种细导线目标数值计算散射场的仿真实验表明，相比于传统E脉冲能量识别数，本文方法取得了很好的识别效果。

Based on the theory of Vlasov, this paper proposed the method of spline Ritz to analyse the restrained torsion of thin walled bar with open section, combining the traditional Ritz method and spline function method.

提出了一类新的样条坐标矩阵。同时在符拉索夫理论的基础上，结合传统的里兹法，利用样条函数提出了开口薄壁杆件约束扭转计算的样条里兹法。

In this paper, by using fire resistant test with fire protection layer of thin-shape paints and considering equivalent resistant time of typical components, introduce a practice method of fire resistant design and calculate.

文中介绍了在工程设计中，结合薄型涂料保护层的构件耐火实验，考虑各构件的当量耐火时间，对钢构件进行抗火计算和设计的方法。

According to the theory of thin walled strUctUre torsion analysis, this paper made use of the transfer matrix method to set up the transfer equations of the initial parameters on the boxes structure with non-uniform á nd many rooms.

本文根据薄壁结构扭转分析理论，应用传递矩阵法，推导了多室变截面箱形结构的初参数传递方程。

This paper documents conclusions which are useful in laying down design standard of the cable bridge and stability design of other thin walled structure.

这不仅为电缆桥架的标准制定提供了依据，也可为其他薄壁件的稳定设计计算作参考。

It is of interest for interpreting the thin-bedded AVO anomaly to calculate the equation of reflection coefficient in the solid multilayered medium as derived in the paper and based on which to write the reflection forward computation program.

文中推导的固体多层介质情况下计算反射系数的公式及据此编制的反射波正演计算程序对于薄层AVO异常的解释是有意义的。

A new method of the preparing ultra thin section specimen using mini vibrator is described in this paper.

介绍了一种全新的电子显微镜下超薄切片样品制备方法。

By rectangle thin-plate weir test, this paper validates the existence of scale effect, analyses the affection of scale effect for discharging capacity of rectangle thin-plate weir, recommends a high-precision calculating formula, and puts forward the measure and the suggestion of reducing scale effect.

本文通过矩形薄壁堰试验，验证了缩尺效应的存在，分析了缩尺效应对矩形薄壁堰泄水能力的影响，推荐了计算精度较高的计算公式，提出了减小缩尺效应的措施及建议。

The herein-presented technology of production makes it possible to fabricate parts with deep relief using a wide gamut of different materials even as the thin-sheet metal alloys and paper.

本文提出的工艺方法可用于不同材料的深度起伏构造制造，如金属薄板和纸等。

This paper carried out nonlinear finite element analysis of Reinforced concrete two-way thin-slab of frame construction, which received uniformly distributed load and four sides supported with spring beam in the normal stage.

本文对正常使用状态下，框架结构中承受均布荷载的，周边为弹性支撑梁的钢筋混凝土双向薄板进行了非线性有限元分析。

This paper presents a new design method for thin-wall hot-rolled channel columns in fire condition using Rankine formula.

基于Rankine公式，提出了一种可用于计算热轧薄壁槽钢柱抗火极限的方法，采用有限元软件MSC。

This paper carries out the comparison between FEM and the theory of thin-walled bar's bending and torsion and gives the methods for modelling and boundary processing.

将有限元与薄壁杆件弯扭理论两种计算方法进行了分析对比，提出了模型化及边界处理的方法。