three-point test的例句大全

The femoral biomechanics parameters and anti-compress ability of lumbar vertebrae were measured by three-point assay and compress test respectively.

三点弯曲实验法及腰椎压缩实验法分别测定股骨和腰椎生物力学指标；

The process of three-point bending test and data processing are involved.

介绍了岩石三点弯曲蠕变试验过程及数据处理方法。

A method to solve tension softening relationship of concrete from the three-point bending test

基于三点弯曲实验的混凝土抗拉软化关系的求解方法

Prediction Between Instrumented Impact Test and Three-Point Bending Fracture Toughness Using Local Approach

基于局部法示波冲击与三点弯曲断裂韧性相互预测

The failure loads were tested in three-point bending test.

用3点弯曲法测试两组试件钛瓷分离时的载荷。

The bonding strength of the samples was measured by a three-point bending test.

采用三点弯曲试验测量钛与瓷的结合强度。

Discussion on contact situation of specimen with supports in Hopkinson bar three-point bending test

Hopkinson杆三点弯曲试验中试样与支座接触状态分析

Three-point bending test was carried out for the measurement of the femur biomechanical properties.

取股骨行三点弯曲试验，测骨生物力学性能指标。

Biomechanical test: Structural and material mechanical properties of right femur were measured by three-point bend test;

负重骨生物力学性能测试：取右股骨进行三点弯曲试验，测结构力学指标最大桡度、弹性桡度、最大负荷、弹性负荷，计算材料力学指标弹性模量、刚性系数、韧性系数；

Crack propagation of three-point bending test imitated and get the result coincide with the actual.

详细介绍了XFEM理论，并模拟了陶瓷试件三点弯曲试验中裂纹的扩展，得到与实相吻合的结果。

The bonding strength of Ti/ porcelain was evaluated using three-point bending test according to ISO 9693 1990 standard.

根据ISO9693标准，对钛/瓷间的三点弯曲结合强度进行测试，并对钛/瓷结合界面进行SEM观察。

On days 12,21,30 and 40, each group was sampled for evaluation using radiography, three-point stress test and histology.

于手术后12、21、30、40d从每组抽取样本作动态X线片检查，左胫骨骨折处三点应力实验及组织学观察。将所得数据进行统计学分析。

And simulated three-point bending test of concrete, given the failure process of the specimens map and the load-displacement curve.

模拟了混凝土的三点弯曲试验，给出试件的破坏过程和荷载&位移曲线。

Objective: This study was used to evaluate the flexural strength of three kinds of resin composite core materials with a method of three-point bending test.

目的：采用三点弯曲实验的方法测量3种复合树脂核材料的弯曲强度。

The mechanical properties, microstructure and toughing mechanism of the composites were investigated by three-point bending test, impact test and scanning electron microscopy.

通过弯曲性能测试、冲击性能测试以及断面SEM形貌分析来研究复合材料的力学性能、微观结构以及增韧机制。

The left mandibule and femur were preserved under-20 ≥ in refrigerator for three-point bending test.

取左侧颌骨、股骨，-20℃冰箱保存，测三点弯曲骨生物力学指标。

The flexural properties of the three composites were also tested and a multi-stage layer-by-layer rupture mode was observed in the three-point bending test. 3.

使用三点弯曲实验测试三种复合材料的弯曲性能，三种材料均表现出了多阶段的逐层断裂模式。

The load that the femur withstood in three-point bending test decreased by 17.1% ( P < 0.05), and the other biomechanical parameters also declined.

与C组比较，D组的BMD均稍有增加。与B组比较，C组股骨三点弯曲的载荷减少了17.1%（P

Three-point bending test and torsion test were carried out with the plates fixed to plastic composite bones to compare the mechanical property of CCPC-plate and SCP.

CCPC－Fix与材料、尺寸完全一致的SCP做三点弯曲试验与扭转试验，比较两种不同钢板的力学性能。

Methods Flexural strength and elastic modulus were measured by three-point bending test at selected temperatures from 830 C to 950. X-ray diffraction was used to investigate the type of crystal and crystal percentage.

方法按不同晶化温度条件分组，利用X射线衍射技术鉴定晶相，计算晶体含量，并采用三点弯曲法测定各组的抗弯强度和弹性模量。