tig的例句大全

TIG has been used for root pass, self-shielded flux-core FCAW for fill and gap in light of the characteristics on the construction site.

根据现场施工特点，采用钨极氩弧焊根焊、自保护药芯焊丝半自动焊填充、盖面。

Designing the Control Circuit in the Square wave Current TIG Arc Welding Power

方波TIG焊电源控制电路的设计

The Research of High Voltage Ignite Digital Welding Machine for TIG

数字化高压引弧式TIG焊机的研制

In this paper, a computer controlling hot-wire TIG ( GTA) tube welding sys-tem is p resented to raise the welding speed and quality, which fits the needs of thedevelopment of production.

本文介绍了新开发的微机控制热丝钨极氩弧焊（GTA）焊管系统，旨在提高焊接速度及质量以适应生产发展的需要。

This paper studied how to attain the distribution regulation of welding residual stress of butt joint of plate after weld toe was TIG remelted and intense cooled by finite element method. It includes residual stress distribution after welded and weld toe TIG remelting.

本文主要研究如何应用有限元法分析平板对接的焊趾TIG重熔层激冷处理对焊趾表面残余应力分布的影响规律，包括焊态和焊趾TIG重熔的残余应力的分布。

Finite element simulation of temperature field for TIG butt welding of thin plate

薄板TIG对接焊温度场的有限元模拟

Application of Inner Hole Half-automatic TIG welding in First Pass of Collector Tube Joint

内孔半自动氩弧焊在集箱管接头封底焊中的应用

Influence of Welding Parameters on Single-Component A-TIG Weld Formation

焊接规范对单组分活性剂A-TIG焊焊缝成形的影响

Cold body TIG surfacing technology and mechanical property of copper alloy gland ring

铜合金密封环冷体TIG堆焊工艺及接头力学性能

A new Tig welding process with tailoring magnetic field was supposed according to magnetism len technique.

利用磁镜原理，设计了电磁复合场下的TIG振荡焊接工艺。

Development of Auto TIG Welding Power Source for All Position Welding

全位置自动焊管机TIG焊电源研制

Development of age hardening alloy metal powder-cored wire for TIG surfacing

时效硬化工具合金TIG堆焊金属粉芯焊丝的研制

Study on Hardness and Red hardness of Surfacing Metal of Metal Powder-Cored Wire of Age Hardening Tool Alloy for TIG Surfacing

时效硬化工具合金TIG金属粉芯焊丝堆焊金属硬度和红硬性

Effect of cobalt on hardness and red hardness of surfacing layer of metal cored wire for TIG surfacing of age hardening alloy

Co元素对时效硬化工具合金TIG堆焊金属粉芯焊丝堆焊层硬度及红硬性的影响

Even the relative low wire feed rate of 6 m/ min exceeds 3 times of routine TIG welding, which greatly improves the welding efficiency.

6~10m/min的送丝速度较常规TIG焊接提高了3倍以上，大大提高了焊接效率。

Use the self-built pulse TIG welding melting pool geometric parameter inspection system based on computer vision, the clear melting pool image was pictured from the front through CCD sensor.

利用自行建立的基于计算机视觉的脉冲TIG焊熔池几何参数检测系统，从工件的正面利用CCD传感器拍摄到了清晰的熔池图像。

The results show that it should be more careful to design according to high strength classic S N curves, for the tests reveal little difference of the fatigue strength between TIG and other welding methods as in the same form of welded joints.

结果表明：使用TIG焊获得的LF21铝合金原始焊接接头的疲劳强度与其它焊接方法得到的同样接头的疲劳强度基本相当，试图采用更高强度级别的SN曲线对其进行设计时应持慎重态度。

A closed-loop control system with welding current as control parameter is founded to control the width of isothermal line of back-side welding temperature field in TIG welding of thin plate. The control of penetration and width of back side weld is achieved.

以焊接电流为控制量，研制了薄板钨极氩弧焊（TIG）背面温度场等温线宽度闭环控制系统，实现了对焊缝背面熔宽和熔透的控制。

A multi-function TIG welding inverter controller is developed, which has a good man-machine interface according to the demand nowadays.

本文针对当前对一机多用的多功能TIG焊机的需求，成功开发了一台具有良好人机交互界面的集多种TIG焊接方法于一体的多功能TIG焊控制器。

As one part of multi-task system about TIG welding machine, the coordination of man-machine interaction system with other tasks was the main point to the stability and reliability of operation.

这种人机交互系统作为全数字化TIG焊机多任务系统的一项任务，与其它任务的时间协调是影响其稳定可靠操作的关键。