tightening nut的例句大全

Loosen the tightening nut on the underside of the tailpipe.

旋开排气尾管底面的紧固螺母。

Install the bushing by tightening the Long Nut.

通过扭紧长螺帽来安装衬套。

When tightening the fastening nut, hold at the piston rod using a7-mm open-ended wrench.

拧紧紧固螺母时，请使用7-mm开口扳手托住活塞杆。

Tighten the union nut with the correct tightening torque.

用正确的力矩拧紧联管螺母。

Tighten lock nut for the drive shaft to the specified tightening torque.

将驱动轴的锁紧螺母拧紧至规定的拧紧力矩。

The union nut on the hydraulic line must be tightened to the specified tightening torque using the following tools.

必须用下列工具，将液压管路上的联管螺母拧紧到规定的拧紧力矩。

Eccentric screw and lock nut are only tightened to the prescribed tightening torque during suspension alignment!

偏心螺钉和锁紧螺母仅在悬架定位期间拧紧至规定的拧紧力矩！

Tighten lock nut from camber eccentric to the prescribed tightening torque tightening torques for rear axle.

将外倾角偏心装置的锁紧螺母紧固至规定的拧紧力矩后轴的拧紧力矩。

Vehicle breakdowns can occur if the fastening nut securing the battery ground strap to the body is not tightened to the specified tightening torque.

如果将蓄电池接地端固定到车身的紧固螺母未能拧紧到指定的拧紧力矩，则可能导致车辆发生故障。

you can adjust turns tension by tightening the inside stop nut on the rotor shaft against the backplate to provide a more pleasing tension.

你能通过拧紧动片轴上对着后端板的内防松螺母来调整旋转紧张力以提供一更令人满意的紧张力。

Why don't you try tightening the pinion nut first?

你为什么不先扭紧小齿轮的螺帽?

The equation for calculating minimum tightening torque on the crank pin nut is given.

给出了曲柄销联接螺母的最小拧紧力矩计算公式.